[PATCH 2/2] imx8mn/8mp: Select ENV_IS_NOWHERE

Adam Ford aford173 at gmail.com
Thu Apr 21 18:51:23 CEST 2022


On Thu, Apr 21, 2022 at 11:47 AM Fabio Estevam <festevam at denx.de> wrote:
>
> Hi Michael,
>
> On 21/04/2022 13:34, Michael Nazzareno Trimarchi wrote:
>
> > That function should drop. There is not other architecture that does
> > it. What about:
>
> I implemented your suggestion like this:
>
> --- a/arch/arm/mach-imx/imx8m/soc.c
> +++ b/arch/arm/mach-imx/imx8m/soc.c
> @@ -1536,6 +1536,14 @@ enum env_location arch_env_get_location(enum
> env_operation op, int prio)
>                  return ENVL_UNKNOWN;
>
>          switch (dev) {
> +       case USB_BOOT:
> +               if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
> +                       return ENVL_SPI_FLASH;
> +               if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
> +                       return ENVL_NAND;
> +               if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC))
> +                       return ENVL_MMC;
> +               return ENVL_NOWHERE;
>          case QSPI_BOOT:
>          case SPI_NOR_BOOT:
>                  if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
>
> This still allows me to save the env into the eMMC when U-Boot
> is loaded from USB.
>
> > register_enviroment_hook()
> > deregister_enviroment_hook()
> >
> > This can replace the one default with board/arch etc
>
> Marek submitted these patches:
>
> https://source.denx.de/u-boot/u-boot/-/commit/de70e8879bb253f4d2a9ba9149cd41cb38b94ed8
>
> https://source.denx.de/u-boot/u-boot/-/commit/e4dc2d0620851d6e0e784d4ef0a50f26e1e73857
>

I believe those were applied today.  I haven't verified it yet, but I
think I saw the e-mail go by.

> Is this the mechanism that you are looking for?


More information about the U-Boot mailing list