[PATCH V3 3/4] imx: imx8mn_evk: enable CONFIG_DM_SERIAL

Peng Fan (OSS) peng.fan at oss.nxp.com
Wed Apr 13 04:11:50 CEST 2022


From: Peng Fan <peng.fan at nxp.com>

Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already
marked with u-boot,dm-spl.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 board/freescale/imx8mn_evk/spl.c  | 12 ++----------
 configs/imx8mn_ddr4_evk_defconfig |  1 +
 configs/imx8mn_evk_defconfig      |  1 +
 3 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 03f2a56e805..8708c93fa34 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -110,14 +110,8 @@ int board_fit_config_name_match(const char *name)
 }
 #endif
 
-#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 #define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
-static iomux_v3_cfg_t const uart_pads[] = {
-	IMX8MN_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-	IMX8MN_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
 static iomux_v3_cfg_t const wdog_pads[] = {
 	IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
@@ -130,8 +124,6 @@ int board_early_init_f(void)
 
 	set_wdog_reset(wdog);
 
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-
 	return 0;
 }
 
@@ -147,8 +139,6 @@ void board_init_f(ulong dummy)
 
 	timer_init();
 
-	preloader_console_init();
-
 	/* Clear the BSS. */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
@@ -158,6 +148,8 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
+	preloader_console_init();
+
 	enable_tzc380();
 
 	/* DDR initialization */
diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig
index 917cdb5aa9d..474d9cfa4d2 100644
--- a/configs/imx8mn_ddr4_evk_defconfig
+++ b/configs/imx8mn_ddr4_evk_defconfig
@@ -76,6 +76,7 @@ CONFIG_PINCTRL_IMX8M=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig
index 7749ebe537e..5bc175154ba 100644
--- a/configs/imx8mn_evk_defconfig
+++ b/configs/imx8mn_evk_defconfig
@@ -83,6 +83,7 @@ CONFIG_DM_REGULATOR=y
 CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
-- 
2.35.1



More information about the U-Boot mailing list