imx8mm eLCDIF clock
Tommaso Merciai
tommaso.merciai at amarulasolutions.com
Thu Apr 21 12:29:07 CEST 2022
On Thu, Apr 21, 2022 at 08:48:05AM +0200, Tommaso Merciai wrote:
+ Fabio
+ Tim
+ Michael
+ Marek
+ Adam
> Hi,
> I'm working on drivers/clk/imx/clk-imx8mm.c to port and bring up eLCDIF
> clocks. After port all necessary clocks needed by eLCDIF I found that
> IMX8MM_VIDEO_PLL1 clock is not enabled and need the clk_enable to enable
> it at the end of the clk-imx8mm probe:
>
> struct clk *clkp;
>
> clk_get_by_id(IMX8MM_VIDEO_PLL1, &clkp);
> clk_set_rate(clkp, 594000000UL);
> clk_enable(clkp);
>
> What do you think about this solution?
> There is a more standard way to do this?
> I'm missing somethings?
>
> Thanks,
> Tommmaso
> --
> Tommaso Merciai
> Embedded Linux Engineer
> tommaso.merciai at amarulasolutions.com
> __________________________________
>
> Amarula Solutions SRL
> Via Le Canevare 30, 31100 Treviso, Veneto, IT
> T. +39 042 243 5310
> info at amarulasolutions.com
> www.amarulasolutions.com
--
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai at amarulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info at amarulasolutions.com
www.amarulasolutions.com
More information about the U-Boot
mailing list