imx8mm eLCDIF clock

[Tommaso Merciai]

Hi,
I'm working on drivers/clk/imx/clk-imx8mm.c to port and bring up eLCDIF
clocks. After port all necessary clocks needed by eLCDIF I found that
IMX8MM_VIDEO_PLL1 clock is not enabled and need the following code to enable
it at the end of the clk-imx8mm probe:

struct clk *clkp;

clk_get_by_id(IMX8MM_VIDEO_PLL1, &clkp);
clk_set_rate(clkp, 594000000UL);
clk_enable(clkp);

What do you think about this solution?
There is a more standard way to do this?

Thanks,
Tommmaso
-- 
Tommaso Merciai
Embedded Linux Engineer
tommaso.merciai at amarulasolutions.com
__________________________________

Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info at amarulasolutions.com
www.amarulasolutions.com