[PATCH v2 16/52] mips: octeon: Add cvmx-helper-npi.c

[Stefan Roese]

From: Aaron Williams <awilliams at marvell.com>

Import cvmx-helper-npi.c from 2013 U-Boot. It will be used by the later
added drivers to support networking on the MIPS Octeon II / III
platforms.

Signed-off-by: Aaron Williams <awilliams at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---
 arch/mips/mach-octeon/cvmx-helper-npi.c | 137 ++++++++++++++++++++++++
 1 file changed, 137 insertions(+)
 create mode 100644 arch/mips/mach-octeon/cvmx-helper-npi.c

diff --git a/arch/mips/mach-octeon/cvmx-helper-npi.c b/arch/mips/mach-octeon/cvmx-helper-npi.c
new file mode 100644
index 000000000000..92ee1a80215a
--- /dev/null
+++ b/arch/mips/mach-octeon/cvmx-helper-npi.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ *
+ * Functions for NPI initialization, configuration,
+ * and monitoring.
+ */
+
+#include <time.h>
+#include <log.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/cvmx-bootmem.h>
+#include <mach/octeon-model.h>
+#include <mach/cvmx-fuse.h>
+#include <mach/octeon-feature.h>
+#include <mach/cvmx-qlm.h>
+#include <mach/octeon_qlm.h>
+#include <mach/cvmx-pcie.h>
+#include <mach/cvmx-coremask.h>
+
+#include <mach/cvmx-agl-defs.h>
+#include <mach/cvmx-bgxx-defs.h>
+#include <mach/cvmx-ciu-defs.h>
+#include <mach/cvmx-gmxx-defs.h>
+#include <mach/cvmx-gserx-defs.h>
+#include <mach/cvmx-ilk-defs.h>
+#include <mach/cvmx-ipd-defs.h>
+#include <mach/cvmx-pexp-defs.h>
+#include <mach/cvmx-pcsx-defs.h>
+#include <mach/cvmx-pcsxx-defs.h>
+#include <mach/cvmx-pki-defs.h>
+#include <mach/cvmx-pko-defs.h>
+#include <mach/cvmx-sli-defs.h>
+#include <mach/cvmx-xcv-defs.h>
+
+#include <mach/cvmx-hwpko.h>
+#include <mach/cvmx-ilk.h>
+#include <mach/cvmx-pki.h>
+
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-helper-cfg.h>
+
+static int cvmx_npi_num_pipes = -1;
+
+/**
+ * @INTERNAL
+ * Probe a NPI interface and determine the number of ports
+ * connected to it. The NPI interface should still be down
+ * after this call.
+ *
+ * @param interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_npi_probe(int interface)
+{
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		return 32;
+	else if (OCTEON_IS_MODEL(OCTEON_CN73XX))
+		return 128;
+	else if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+		return 64;
+
+	return 0;
+}
+
+/**
+ * @INTERNAL
+ * Bringup and enable a NPI interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_npi_enable(int xiface)
+{
+	struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+	int interface = xi.interface;
+	int port;
+	int num_ports = cvmx_helper_ports_on_interface(interface);
+
+	/*
+	 * On CN50XX, CN52XX, and CN56XX we need to disable length
+	 * checking so packet < 64 bytes and jumbo frames don't get
+	 * errors.
+	 */
+	for (port = 0; port < num_ports; port++) {
+		union cvmx_pip_prt_cfgx port_cfg;
+		int ipd_port =
+			(octeon_has_feature(OCTEON_FEATURE_PKND)) ?
+				cvmx_helper_get_pknd(interface, port) :
+				      cvmx_helper_get_ipd_port(interface, port);
+		if (octeon_has_feature(OCTEON_FEATURE_PKI)) {
+			unsigned int node = cvmx_get_node_num();
+
+			cvmx_pki_endis_l2_errs(node, ipd_port, 0, 0, 0);
+
+		} else {
+			port_cfg.u64 = csr_rd(CVMX_PIP_PRT_CFGX(ipd_port));
+			port_cfg.s.lenerr_en = 0;
+			port_cfg.s.maxerr_en = 0;
+			port_cfg.s.minerr_en = 0;
+			csr_wr(CVMX_PIP_PRT_CFGX(ipd_port), port_cfg.u64);
+		}
+		if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
+			/* Set up pknd and bpid */
+			union cvmx_sli_portx_pkind config;
+
+			config.u64 = csr_rd(CVMX_PEXP_SLI_PORTX_PKIND(port));
+			config.s.bpkind = cvmx_helper_get_bpid(interface, port);
+			config.s.pkind = cvmx_helper_get_pknd(interface, port);
+			csr_wr(CVMX_PEXP_SLI_PORTX_PKIND(port), config.u64);
+		}
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
+		/*
+		 * Set up pko pipes.
+		 */
+		union cvmx_sli_tx_pipe config;
+
+		config.u64 = csr_rd(CVMX_PEXP_SLI_TX_PIPE);
+		config.s.base = __cvmx_pko_get_pipe(interface, 0);
+		config.s.nump =
+			cvmx_npi_num_pipes < 0 ? num_ports : cvmx_npi_num_pipes;
+		csr_wr(CVMX_PEXP_SLI_TX_PIPE, config.u64);
+	}
+
+	/* Enables are controlled by the remote host, so nothing to do here */
+	return 0;
+}
-- 
2.35.1