[PATCH v3 0/6] meson: add clk and adc support for JetHub D1 (j100)

[Neil Armstrong]

Hi,

On Sun, 24 Apr 2022 11:21:53 +0300, Vyacheslav Bocharov wrote:
> Prepare to use ADC channel 1 in JetHub D1 (j100) to check the hardware
> revision of the board.
> 
> - add support for AXG in saradc driver
> - add simple clk-ao driver for AXG (base is taken from g12a)
> - enable saradc in dts and board config file
> - fix typo in the g12a-clk-ao driver name
> - move clk->id check to .request function for g12a-clk-ao driver
> - remove unnecessary check (gate->reg == 0) in g12a-clk-ao driver
> - enable saradc in dts/board config for JetHub D1 (j100)
> 
> [...]

Thanks, Applied to https://source.denx.de/u-boot/custodians/u-boot-amlogic (u-boot-amlogic-test)

[1/6] clk: meson: add minimal driver for axg-ao clocks
      https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/dcccf730043197464f7bafdb1abcebcb7fd828b0
[2/6] clk: meson: fix driver name for g12a-ao clocks
      https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/4da098656228535539be40f76806ad6657b94407
[3/6] clk: meson: update driver for g12a-ao clocks
      https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/66a657b7c6082fe374c99d5b2a7e0d911091dbe4
[4/6] adc: meson-saradc: add AXG variant
      https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/8a4a73f466c1d2189aa5f8612f2f90ec9a727ea0
[5/6] board: amlogic: jethub j100: enable saradc in dts
      https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/ee8094f69646825d2c30b8bb9082e976f023f710
[6/6] board: amlogic: jethub j100: enable saradc in config
      https://source.denx.de/u-boot/custodians/u-boot-amlogic/-/commit/a718f5524d492fb5708e884cb1db21384f826c00

-- 
Neil