[PATCH v2] board: gateworks: venice: enable DM_SERIAL
Michael Nazzareno Trimarchi
michael at amarulasolutions.com
Wed Apr 13 17:56:09 CEST 2022
Hi Tim
On Wed, Apr 13, 2022 at 5:47 PM Tim Harvey <tharvey at gateworks.com> wrote:
>
> Enable DM_SERIAL.
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
> v2: rebase on imx/master
> ---
> configs/imx8mm_venice_defconfig | 2 ++
> configs/imx8mn_venice_defconfig | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
> index dd61ec9b70fb..09f7d8a58ca7 100644
> --- a/configs/imx8mm_venice_defconfig
> +++ b/configs/imx8mm_venice_defconfig
> @@ -110,6 +110,8 @@ CONFIG_SPL_DM_PMIC_MP5416=y
> CONFIG_DM_REGULATOR=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_SERIAL=y
> +# CONFIG_SPL_DM_SERIAL is not set
> CONFIG_MXC_UART=y
> CONFIG_SYSRESET=y
> CONFIG_SPL_SYSRESET=y
> diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig
> index c3a96a378553..41898da4aecf 100644
> --- a/configs/imx8mn_venice_defconfig
> +++ b/configs/imx8mn_venice_defconfig
> @@ -108,6 +108,8 @@ CONFIG_SPL_DM_PMIC_MP5416=y
> CONFIG_DM_REGULATOR=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_SERIAL=y
> +# CONFIG_SPL_DM_SERIAL is not set
> CONFIG_MXC_UART=y
> CONFIG_SYSRESET=y
> CONFIG_SPL_SYSRESET=y
> --
> 2.17.1
>
Should not select in your board kconfig?
Michael
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com
More information about the U-Boot
mailing list