[PATCH v2] board: gateworks: venice: enable DM_SERIAL

[Tim Harvey]

On Wed, Apr 13, 2022 at 8:56 AM Michael Nazzareno Trimarchi
<michael at amarulasolutions.com> wrote:
>
> Hi Tim
>
> On Wed, Apr 13, 2022 at 5:47 PM Tim Harvey <tharvey at gateworks.com> wrote:
> >
> > Enable DM_SERIAL.
> >
> > Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> > ---
> > v2: rebase on imx/master
> > ---
> >  configs/imx8mm_venice_defconfig | 2 ++
> >  configs/imx8mn_venice_defconfig | 2 ++
> >  2 files changed, 4 insertions(+)
> >
> > diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
> > index dd61ec9b70fb..09f7d8a58ca7 100644
> > --- a/configs/imx8mm_venice_defconfig
> > +++ b/configs/imx8mm_venice_defconfig
> > @@ -110,6 +110,8 @@ CONFIG_SPL_DM_PMIC_MP5416=y
> >  CONFIG_DM_REGULATOR=y
> >  CONFIG_DM_REGULATOR_FIXED=y
> >  CONFIG_DM_REGULATOR_GPIO=y
> > +CONFIG_DM_SERIAL=y
> > +# CONFIG_SPL_DM_SERIAL is not set
> >  CONFIG_MXC_UART=y
> >  CONFIG_SYSRESET=y
> >  CONFIG_SPL_SYSRESET=y
> > diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig
> > index c3a96a378553..41898da4aecf 100644
> > --- a/configs/imx8mn_venice_defconfig
> > +++ b/configs/imx8mn_venice_defconfig
> > @@ -108,6 +108,8 @@ CONFIG_SPL_DM_PMIC_MP5416=y
> >  CONFIG_DM_REGULATOR=y
> >  CONFIG_DM_REGULATOR_FIXED=y
> >  CONFIG_DM_REGULATOR_GPIO=y
> > +CONFIG_DM_SERIAL=y
> > +# CONFIG_SPL_DM_SERIAL is not set
> >  CONFIG_MXC_UART=y
> >  CONFIG_SYSRESET=y
> >  CONFIG_SPL_SYSRESET=y
> > --
> > 2.17.1
> >
>
> Should not select in your board kconfig?
>

Michael,

I don't think it really matters. The other conversions to DM_SERIAL
are going in defconfigs as well.

Best Regards,

Tim