[RESEND, RFC 0/8] Integration of sysfw and tispl with U-Boot

[Neha Malcom Francis]

Resending this patch as I had added an improper tag last time.

Devices that belong to the K3 architecture require SYSFW which is a FIT
image consisting of a signed system firmware image and board config
binaries.

Board config binaries are needed to bring up SYSFW during U-Boot SPL
startup. The board config data is given in YAML as input. These board
configs contain board-specific information such as resource management,
power management and security.

The following series intends to plumb the system firmware generation
into U-Boot using binman for packaging. Thus it will eliminate the need
for additional custom repositories for SYSFW generation and also moves t
owards the community standard build flow.

The series also plumbs the generation of tispl.bin into the build flow.
This image is required for loading u-boot in K3 devices. The image is
packaged using ATF, OPTEE and DM (Device Manager).

Please note that the following series has implemented the above for
J721E general purpose board. The board configs and device trees added
are specific to J721E GP devices.

Also note the introduction of two new etypes for sysfw and ti-dm.

The binman tests for sysfw has coverage of 90%, this is believed to be
because of the requirement of sysfw to access a signing script located
outside the binman directory. Logs of the binman test is located here:
https://pastebin.ubuntu.com/p/n5CdT7TFJg/

On running CI tests on Github, errors were produced during world builds
of keystone2_keystone3 and siemens (I0T2050 which is based on AM65x).
This patch series is intended for only J721E and future work is to expand
to the remaining K3 devices as well. The errors that come are mainly due
to the boards other than J721E trying to generate tispl.bin. Error logs
of the CI test is located here:
https://pastebin.ubuntu.com/p/rpMrWzH7tv/

Neha Malcom Francis (8):
  tools: config: yaml: Add board config class to generate config
    binaries
  binman: etype: sysfw: Add entry type for sysfw
  schema: yaml: Add board config schema
  config: yaml: j721e_evm: Add board config for J721E EVM
  binman: sysfw: Add support for packaging tiboot3.bin and sysfw.itb
  binman: dtsi: sysfw: j721e: Use binman to package sysfw.itb
  binman: etype: dm: Add entry type for TI DM
  binman: dtsi: tispl: j721e: Use binman to package tispl.bin

 Makefile                                      |    1 +
 arch/arm/dts/j721e-a72-binman.dtsi            |   92 +
 arch/arm/dts/j721e-r5-binman.dtsi             |   75 +
 .../k3-j721e-common-proc-board-u-boot.dtsi    |    1 +
 .../k3-j721e-r5-common-proc-board-u-boot.dtsi |    1 +
 arch/arm/mach-k3/config.mk                    |   54 +-
 board/ti/common/schema.yaml                   |  355 ++
 board/ti/j721e/Kconfig                        |    2 +
 board/ti/j721e/config.yaml                    | 3162 +++++++++++++++++
 scripts/Makefile.spl                          |    4 -
 test/py/requirements.txt                      |    1 +
 tools/binman/entries.rst                      |   21 +
 tools/binman/etype/sysfw.py                   |   60 +
 tools/binman/etype/ti_dm.py                   |   22 +
 tools/binman/ftest.py                         |   14 +
 tools/binman/test/225_ti_dm.dts               |   13 +
 tools/binman/test/226_sysfw.dts               |   13 +
 tools/tibcfg_gen.py                           |  116 +
 18 files changed, 3969 insertions(+), 38 deletions(-)
 create mode 100644 arch/arm/dts/j721e-a72-binman.dtsi
 create mode 100644 arch/arm/dts/j721e-r5-binman.dtsi
 create mode 100644 board/ti/common/schema.yaml
 create mode 100644 board/ti/j721e/config.yaml
 create mode 100644 tools/binman/etype/sysfw.py
 create mode 100644 tools/binman/etype/ti_dm.py
 create mode 100644 tools/binman/test/225_ti_dm.dts
 create mode 100644 tools/binman/test/226_sysfw.dts
 create mode 100644 tools/tibcfg_gen.py

-- 
2.17.1