[PATCH 1/2] board: gateworks: venice: add additional levels for dtb name match

[Stefano Babic]

Hi Tim,

(quite unrelated to this series): after applying tons of patches, there 
are a list that are obsolete and need to be rebased. I applied several 
of the patches you sent, some have open issues, some cannot be applied 
(as this series), as they depend on other patches too.

I would appreciate if you can check what is missing for Gateworks, and 
then repost on top of u-boot-imx (or you wait my PR to Tom, I will send 
it today).

Thanks,
Stefano

On 09.04.22 00:14, Tim Harvey wrote:
> Gateworks produces many products from a single PCB with subloaded
> components. Add an additional two levels of dtb name matching so that
> for example a GW7400-A matches the dtb name of gw74xx.dtb
> 
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
>   board/gateworks/venice/eeprom.c | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/board/gateworks/venice/eeprom.c b/board/gateworks/venice/eeprom.c
> index 62b8125960c7..282d55f2ae30 100644
> --- a/board/gateworks/venice/eeprom.c
> +++ b/board/gateworks/venice/eeprom.c
> @@ -259,8 +259,16 @@ const char *eeprom_get_dtb_name(int level, char *buf, int sz)
>   			break;
>   		case 2: /* don't care about PCB or BOM revision */
>   			break;
> +		case 3: /* don't care about last digit of model */
> +			buf[strlen(buf) - 1] = 'x';
> +			break;
> +		case 4: /* don't care about last two digits of model */
> +			buf[strlen(buf) - 1] = 'x';
> +			buf[strlen(buf) - 2] = 'x';
> +			break;
>   		default:
>   			return NULL;
> +			break;
>   		}
>   	}
>   


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================