[PATCH] ARM: dts: k3-j721s2: Correct timer frequency

[Vignesh Raghavendra]

On 07/03/22 2:55 pm, Vignesh Raghavendra wrote:
> MCU Timer0 runs at 250MHz, and the clock-frequency defined in DT appears
> incorrect.
> 
> Without this delays in R5 SPL are 10x off.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
> ---
>  arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi
> index 749bc717f3..a17e61eccf 100644
> --- a/arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi
> +++ b/arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi
> @@ -40,7 +40,7 @@
>  		compatible = "ti,omap5430-timer";
>  		reg = <0x0 0x40400000 0x0 0x80>;
>  		ti,timer-alwon;
> -		clock-frequency = <25000000>;
> +		clock-frequency = <250000000>;
>  		u-boot,dm-spl;
>  	};
>  


Gentle ping...