[uU PATCH 8/8] binman: dtsi: tispl: j721e: Use binman to package tispl.bin
Neha Malcom Francis
n-francis at ti.com
Fri Apr 1 16:12:54 CEST 2022
Explicit make commands were earlier used to generate tispl.bin image,
now it is replaced using binman.
Binman picks up and packages entries according to the description of
entries given in the binman node in the device tree. The make commands
that were earlier responsible for generating tispl.bin has been removed.
j721e-a72-binman.dtsi has been introduced for A72 specific binman node.
It can be included in files that require it like
k3-j721e-common-proc-board-u-boot.dtsi.
Note that make commands for secure devices has also been removed as
focus is on general purpose devices at present time.
Signed-off-by: Tarun Sahu <t-sahu at ti.com>
[n-francis at ti.com: prepared patch for upstreaming]
Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
arch/arm/dts/j721e-a72-binman.dtsi | 92 +++++++++++++++++++
.../k3-j721e-common-proc-board-u-boot.dtsi | 1 +
arch/arm/mach-k3/config.mk | 33 -------
board/ti/j721e/Kconfig | 1 +
scripts/Makefile.spl | 4 -
5 files changed, 94 insertions(+), 37 deletions(-)
create mode 100644 arch/arm/dts/j721e-a72-binman.dtsi
diff --git a/arch/arm/dts/j721e-a72-binman.dtsi b/arch/arm/dts/j721e-a72-binman.dtsi
new file mode 100644
index 0000000000..a01b1fcc6d
--- /dev/null
+++ b/arch/arm/dts/j721e-a72-binman.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+
+#include <config.h>
+
+#ifdef CONFIG_ARM64
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ tispl {
+ filename = "tispl.bin";
+ fit {
+ description = "FIT IMAGE";
+ #address-cells = <1>;
+ fit,fdt-list = "of-list";
+ images {
+ atf {
+ description = "ARM Trusted Firmware";
+ type = "firmware";
+ arch = "arm64";
+ compression = "none";
+ os = "arm-trusted-firmware";
+ load = <CONFIG_K3_ATF_LOAD_ADDR>;
+ entry = <CONFIG_K3_ATF_LOAD_ADDR>;
+ atf-bl31 {
+ filename = "bl31.bin";
+ };
+ };
+ tee {
+ description = "OPTEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+ load = <0x9e800000>;
+ entry = <0x9e800000>;
+ tee-os {
+ filename = "tee-pager.bin";
+ missing-msg = "tee-os";
+ };
+ };
+ dm {
+ description = "DM binary";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "DM";
+ load = <0x89000000>;
+ entry = <0x89000000>;
+ ti-dm {
+ filename = "dm.bin";
+ };
+ };
+ spl {
+ description = "SPL (64-bit)";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm64";
+ compression = "none";
+ load = <0x80080000>;
+ entry = <0x80080000>;
+ blob-ext {
+ filename = "spl/u-boot-spl-nodtb.bin";
+ };
+ };
+ k3-j721e-common-proc-board.dtb {
+ description = "k3-j721e-common-proc-board";
+ type = "flat_dt";
+ arch = "arm";
+ compression = "none";
+ blob-ext {
+ filename = "spl/dts/k3-j721e-common-proc-board.dtb";
+ };
+ };
+ };
+ configurations {
+ default = "conf";
+ conf {
+ description = "k3-j721e-common-proc-board";
+ firmware = "atf";
+ loadables = "tee", "dm", "spl";
+ fdt = "k3-j721e-common-proc-board.dtb";
+ };
+ };
+ };
+ };
+};
+#endif
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index 677a72d2a2..78ec6b1d48 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/net/ti-dp83867.h>
+#include "j721e-a72-binman.dtsi"
/ {
chosen {
diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
index 5491fc4dc8..e4b94564b8 100644
--- a/arch/arm/mach-k3/config.mk
+++ b/arch/arm/mach-k3/config.mk
@@ -72,38 +72,5 @@ ifeq ($(CONFIG_SOC_K3_J721E),)
export DM := /dev/null
endif
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-SPL_ITS := u-boot-spl-k3_HS.its
-$(SPL_ITS): export IS_HS=1
-INPUTS-y += tispl.bin_HS
-else
-SPL_ITS := u-boot-spl-k3.its
-INPUTS-y += tispl.bin
-endif
-
-ifeq ($(CONFIG_SPL_OF_LIST),)
-LIST_OF_DTB := $(CONFIG_DEFAULT_DEVICE_TREE)
-else
-LIST_OF_DTB := $(CONFIG_SPL_OF_LIST)
endif
-
-quiet_cmd_k3_mkits = MKITS $@
-cmd_k3_mkits = \
- $(srctree)/tools/k3_fit_atf.sh \
- $(CONFIG_K3_ATF_LOAD_ADDR) \
- $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(LIST_OF_DTB))) > $@
-
-$(SPL_ITS): FORCE
- $(call cmd,k3_mkits)
endif
-
-else
-
-ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
-INPUTS-y += u-boot.img_HS
-else
-INPUTS-y += u-boot.img
-endif
-endif
-
-include $(srctree)/arch/arm/mach-k3/config_secure.mk
diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
index a3a9d504ae..3cf05f0d3b 100644
--- a/board/ti/j721e/Kconfig
+++ b/board/ti/j721e/Kconfig
@@ -14,6 +14,7 @@ config TARGET_J721E_A72_EVM
select BOARD_LATE_INIT
imply TI_I2C_BOARD_DETECT
select SYS_DISABLE_DCACHE_OPS
+ select BINMAN
config TARGET_J721E_R5_EVM
bool "TI K3 based J721E EVM running on R5"
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 83a95ee4aa..21dc434449 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -574,7 +574,3 @@ $(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit
$(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit
@lzop -f9 $< > $@
-ifdef CONFIG_ARCH_K3
-tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
- $(call if_changed,mkfitimage)
-endif
--
2.17.1
More information about the U-Boot
mailing list