[PATCH v2 10/52] mips: octeon: Add cvmx-helper-bgx.c
Stefan Roese
sr at denx.de
Thu Apr 7 09:11:12 CEST 2022
From: Aaron Williams <awilliams at marvell.com>
Import cvmx-helper-bgx.c from 2013 U-Boot. It will be used by the later
added drivers to support networking on the MIPS Octeon II / III
platforms.
Signed-off-by: Aaron Williams <awilliams at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---
arch/mips/mach-octeon/cvmx-helper-bgx.c | 2737 +++++++++++++++++++++++
1 file changed, 2737 insertions(+)
create mode 100644 arch/mips/mach-octeon/cvmx-helper-bgx.c
diff --git a/arch/mips/mach-octeon/cvmx-helper-bgx.c b/arch/mips/mach-octeon/cvmx-helper-bgx.c
new file mode 100644
index 000000000000..7d6e178a447a
--- /dev/null
+++ b/arch/mips/mach-octeon/cvmx-helper-bgx.c
@@ -0,0 +1,2737 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ *
+ * Functions to configure the BGX MAC.
+ */
+
+#include <log.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/cvmx-bootmem.h>
+#include <mach/octeon-model.h>
+#include <mach/cvmx-fuse.h>
+#include <mach/octeon-feature.h>
+#include <mach/cvmx-qlm.h>
+#include <mach/octeon_qlm.h>
+#include <mach/cvmx-pcie.h>
+#include <mach/cvmx-coremask.h>
+
+#include <mach/cvmx-agl-defs.h>
+#include <mach/cvmx-bgxx-defs.h>
+#include <mach/cvmx-gmxx-defs.h>
+#include <mach/cvmx-ipd-defs.h>
+#include <mach/cvmx-pki-defs.h>
+#include <mach/cvmx-xcv-defs.h>
+
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-helper-fdt.h>
+#include <mach/cvmx-helper-bgx.h>
+#include <mach/cvmx-helper-cfg.h>
+#include <mach/cvmx-helper-util.h>
+#include <mach/cvmx-helper-pki.h>
+
+#include <mach/cvmx-global-resources.h>
+#include <mach/cvmx-pko-internal-ports-range.h>
+#include <mach/cvmx-ilk.h>
+#include <mach/cvmx-pip.h>
+
+/* Enable this define to see BGX error messages */
+/*#define DEBUG_BGX */
+
+/* Enable this variable to trace functions called for initializing BGX */
+static const int debug;
+
+/**
+ * cvmx_helper_bgx_override_autoneg(int xiface, int index) is a function pointer
+ * to override enabling/disabling of autonegotiation for SGMII, 10G-KR or 40G-KR4
+ * interfaces. This function is called when interface is initialized.
+ */
+int (*cvmx_helper_bgx_override_autoneg)(int xiface, int index) = NULL;
+
+/*
+ * cvmx_helper_bgx_override_fec(int xiface) is a function pointer
+ * to override enabling/disabling of FEC for 10G interfaces. This function
+ * is called when interface is initialized.
+ */
+int (*cvmx_helper_bgx_override_fec)(int xiface, int index) = NULL;
+
+/**
+ * Delay after enabling an interface based on the mode. Different modes take
+ * different amounts of time.
+ */
+static void
+__cvmx_helper_bgx_interface_enable_delay(cvmx_helper_interface_mode_t mode)
+{
+ switch (mode) {
+ case CVMX_HELPER_INTERFACE_MODE_10G_KR:
+ case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
+ case CVMX_HELPER_INTERFACE_MODE_XLAUI:
+ case CVMX_HELPER_INTERFACE_MODE_XFI:
+ mdelay(250);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_RXAUI:
+ case CVMX_HELPER_INTERFACE_MODE_XAUI:
+ mdelay(100);
+ break;
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ mdelay(50);
+ break;
+ default:
+ mdelay(50);
+ break;
+ }
+}
+
+/**
+ * @INTERNAL
+ *
+ * Returns number of ports based on interface
+ * @param xiface Which xiface
+ * @return Number of ports based on xiface
+ */
+int __cvmx_helper_bgx_enumerate(int xiface)
+{
+ cvmx_bgxx_cmr_tx_lmacs_t lmacs;
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+
+ lmacs.u64 = csr_rd_node(xi.node, CVMX_BGXX_CMR_TX_LMACS(xi.interface));
+ return lmacs.s.lmacs;
+}
+
+/**
+ * @INTERNAL
+ *
+ * Returns mode of each BGX LMAC (port).
+ * This is different than 'cvmx_helper_interface_get_mode()' which
+ * provides mode of an entire interface, but when BGX is in "mixed"
+ * mode this function should be called instead to get the protocol
+ * for each port (BGX LMAC) individually.
+ * Both function return the same enumerated mode.
+ *
+ * @param xiface is the global interface identifier
+ * @param index is the interface port index
+ * @returns mode of the individual port
+ */
+cvmx_helper_interface_mode_t cvmx_helper_bgx_get_mode(int xiface, int index)
+{
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ cvmx_bgxx_spux_br_pmd_control_t pmd_control;
+
+ cmr_config.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+
+ switch (cmr_config.s.lmac_type) {
+ case 0:
+ return CVMX_HELPER_INTERFACE_MODE_SGMII;
+ case 1:
+ return CVMX_HELPER_INTERFACE_MODE_XAUI;
+ case 2:
+ return CVMX_HELPER_INTERFACE_MODE_RXAUI;
+ case 3:
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+ return cvmx_helper_interface_get_mode(xiface);
+ pmd_control.u64 = csr_rd_node(
+ xi.node,
+ CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, xi.interface));
+ if (pmd_control.s.train_en)
+ return CVMX_HELPER_INTERFACE_MODE_10G_KR;
+ else
+ return CVMX_HELPER_INTERFACE_MODE_XFI;
+ break;
+ case 4:
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
+ return cvmx_helper_interface_get_mode(xiface);
+ pmd_control.u64 = csr_rd_node(
+ xi.node,
+ CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, xi.interface));
+ if (pmd_control.s.train_en)
+ return CVMX_HELPER_INTERFACE_MODE_40G_KR4;
+ else
+ return CVMX_HELPER_INTERFACE_MODE_XLAUI;
+ break;
+ case 5:
+ return CVMX_HELPER_INTERFACE_MODE_RGMII;
+ default:
+ return CVMX_HELPER_INTERFACE_MODE_DISABLED;
+ }
+}
+
+static int __cvmx_helper_bgx_rgmii_speed(cvmx_helper_link_info_t link_info)
+{
+ cvmx_xcv_reset_t xcv_reset;
+ cvmx_xcv_ctl_t xcv_ctl;
+ cvmx_xcv_batch_crd_ret_t crd_ret;
+ cvmx_xcv_dll_ctl_t dll_ctl;
+ cvmx_xcv_comp_ctl_t comp_ctl;
+ int speed;
+ int up = link_info.s.link_up;
+ int do_credits;
+
+ if (link_info.s.speed == 100)
+ speed = 1;
+ else if (link_info.s.speed == 10)
+ speed = 0;
+ else
+ speed = 2;
+
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_ctl.u64 = csr_rd(CVMX_XCV_CTL);
+ do_credits = up && !xcv_reset.s.enable;
+
+ if (xcv_ctl.s.lpbk_int) {
+ xcv_reset.s.clkrst = 0;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+ }
+
+ if (up && (!xcv_reset.s.enable || xcv_ctl.s.speed != speed)) {
+ if (debug)
+ debug("%s: *** Enabling XCV block\n", __func__);
+ /* Enable the XCV block */
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.enable = 1;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+
+ /* Set operating mode */
+ xcv_ctl.u64 = csr_rd(CVMX_XCV_CTL);
+ xcv_ctl.s.speed = speed;
+ csr_wr(CVMX_XCV_CTL, xcv_ctl.u64);
+
+ /* Configure DLL - enable or bypass */
+ /* TX no bypass, RX bypass */
+ dll_ctl.u64 = csr_rd(CVMX_XCV_DLL_CTL);
+ dll_ctl.s.clkrx_set = 0;
+ dll_ctl.s.clkrx_byp = 1;
+ dll_ctl.s.clktx_byp = 0;
+ csr_wr(CVMX_XCV_DLL_CTL, dll_ctl.u64);
+
+ /* Enable */
+ dll_ctl.u64 = csr_rd(CVMX_XCV_DLL_CTL);
+ dll_ctl.s.refclk_sel = 0;
+ csr_wr(CVMX_XCV_DLL_CTL, dll_ctl.u64);
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.dllrst = 0;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+
+ /* Delay deems to be need so XCV_DLL_CTL[CLK_SET] works */
+ udelay(10);
+
+ comp_ctl.u64 = csr_rd(CVMX_XCV_COMP_CTL);
+ //comp_ctl.s.drv_pctl = 0;
+ //comp_ctl.s.drv_nctl = 0;
+ comp_ctl.s.drv_byp = 0;
+ csr_wr(CVMX_XCV_COMP_CTL, comp_ctl.u64);
+
+ /* enable */
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.comp = 1;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+
+ /* setup the RXC */
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.clkrst = !xcv_ctl.s.lpbk_int;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+
+ /* datapaths come out of the reset
+ * - the datapath resets will disengage BGX from the RGMII
+ * interface
+ * - XCV will continue to return TX credits for each tick that
+ * is sent on the TX data path
+ */
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.tx_dat_rst_n = 1;
+ xcv_reset.s.rx_dat_rst_n = 1;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+ } else if (debug) {
+ debug("%s: *** Not enabling XCV\n", __func__);
+ debug(" up: %s, xcv_reset.s.enable: %d, xcv_ctl.s.speed: %d, speed: %d\n",
+ up ? "true" : "false", (unsigned int)xcv_reset.s.enable,
+ (unsigned int)xcv_ctl.s.speed, speed);
+ }
+
+ /* enable the packet flow
+ * - The packet resets will be only disengage on packet boundaries
+ * - XCV will continue to return TX credits for each tick that is
+ * sent on the TX datapath
+ */
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.tx_pkt_rst_n = up;
+ xcv_reset.s.rx_pkt_rst_n = up;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+
+ /* Full reset when link is down */
+ if (!up) {
+ if (debug)
+ debug("%s: *** Disabling XCV reset\n", __func__);
+ /* wait 2*MTU in time */
+ mdelay(10);
+ /* reset the world */
+ csr_wr(CVMX_XCV_RESET, 0);
+ }
+
+ /* grant PKO TX credits */
+ if (do_credits) {
+ crd_ret.u64 = csr_rd(CVMX_XCV_BATCH_CRD_RET);
+ crd_ret.s.crd_ret = 1;
+ csr_wr(CVMX_XCV_BATCH_CRD_RET, crd_ret.u64);
+ }
+
+ return 0;
+}
+
+static void __cvmx_bgx_common_init_pknd(int xiface, int index)
+{
+ int num_ports;
+ int num_chl = 16;
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ int node = xi.node;
+ int pknd;
+ cvmx_bgxx_cmrx_rx_bp_on_t bgx_rx_bp_on;
+ cvmx_bgxx_cmrx_rx_id_map_t cmr_rx_id_map;
+ cvmx_bgxx_cmr_chan_msk_and_t chan_msk_and;
+ cvmx_bgxx_cmr_chan_msk_or_t chan_msk_or;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ num_ports = cvmx_helper_ports_on_interface(xiface);
+ /* Modify bp_on mark, depending on number of LMACS on that interface
+ * and write it for every port
+ */
+ bgx_rx_bp_on.u64 = 0;
+ bgx_rx_bp_on.s.mark = (CVMX_BGX_RX_FIFO_SIZE / (num_ports * 4 * 16));
+
+ /* Setup pkind */
+ pknd = cvmx_helper_get_pknd(xiface, index);
+ cmr_rx_id_map.u64 = csr_rd_node(
+ node, CVMX_BGXX_CMRX_RX_ID_MAP(index, xi.interface));
+ cmr_rx_id_map.s.pknd = pknd;
+ /* Change the default reassembly id (RID), as max 14 RIDs allowed */
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX))
+ cmr_rx_id_map.s.rid = ((4 * xi.interface) + 2 + index);
+ csr_wr_node(node, CVMX_BGXX_CMRX_RX_ID_MAP(index, xi.interface),
+ cmr_rx_id_map.u64);
+ /* Set backpressure channel mask AND/OR registers */
+ chan_msk_and.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMR_CHAN_MSK_AND(xi.interface));
+ chan_msk_or.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMR_CHAN_MSK_OR(xi.interface));
+ chan_msk_and.s.msk_and |= ((1 << num_chl) - 1) << (16 * index);
+ chan_msk_or.s.msk_or |= ((1 << num_chl) - 1) << (16 * index);
+ csr_wr_node(node, CVMX_BGXX_CMR_CHAN_MSK_AND(xi.interface),
+ chan_msk_and.u64);
+ csr_wr_node(node, CVMX_BGXX_CMR_CHAN_MSK_OR(xi.interface),
+ chan_msk_or.u64);
+ /* set rx back pressure (bp_on) on value */
+ csr_wr_node(node, CVMX_BGXX_CMRX_RX_BP_ON(index, xi.interface),
+ bgx_rx_bp_on.u64);
+}
+
+/**
+ * @INTERNAL
+ * Probe a SGMII interface and determine the number of ports
+ * connected to it. The SGMII interface should still be down after
+ * this call. This is used by interfaces using the bgx mac.
+ *
+ * @param xiface Interface to probe
+ *
+ * @return Number of ports on the interface. Zero to disable.
+ */
+int __cvmx_helper_bgx_probe(int xiface)
+{
+ return __cvmx_helper_bgx_enumerate(xiface);
+}
+
+/**
+ * @INTERNAL
+ * Return the size of the BGX TX_FIFO for a given LMAC,
+ * or 0 if the requested LMAC is inactive.
+ *
+ * TBD: Need also to add a "__cvmx_helper_bgx_speed()" function to
+ * return the speed of each LMAC.
+ */
+int __cvmx_helper_bgx_fifo_size(int xiface, unsigned int lmac)
+{
+ cvmx_bgxx_cmr_tx_lmacs_t lmacs;
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ unsigned int tx_fifo_size = CVMX_BGX_TX_FIFO_SIZE;
+
+ /* FIXME: Add validation for interface# < BGX_count */
+ lmacs.u64 = csr_rd_node(xi.node, CVMX_BGXX_CMR_TX_LMACS(xi.interface));
+
+ switch (lmacs.s.lmacs) {
+ case 1:
+ if (lmac > 0)
+ return 0;
+ else
+ return tx_fifo_size;
+ case 2:
+ if (lmac > 1)
+ return 0;
+ else
+ return tx_fifo_size >> 1;
+ case 3:
+ if (lmac > 2)
+ return 0;
+ else
+ return tx_fifo_size >> 2;
+ case 4:
+ if (lmac > 3)
+ return 0;
+ else
+ return tx_fifo_size >> 2;
+ default:
+ return 0;
+ }
+}
+
+/**
+ * @INTERNAL
+ * Perform initialization required only once for an SGMII port.
+ *
+ * @param xiface Interface to init
+ * @param index Index of prot on the interface
+ *
+ * @return Zero on success, negative on failure
+ */
+static int __cvmx_helper_bgx_sgmii_hardware_init_one_time(int xiface, int index)
+{
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ int node = xi.node;
+ const u64 clock_mhz = 1200; /* todo: fixme */
+ cvmx_bgxx_gmp_pcs_miscx_ctl_t gmp_misc_ctl;
+ cvmx_bgxx_gmp_pcs_linkx_timer_t gmp_timer;
+
+ if (!cvmx_helper_is_port_valid(xi.interface, index))
+ return 0;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ /*
+ * Write PCS*_LINK*_TIMER_COUNT_REG[COUNT] with the
+ * appropriate value. 1000BASE-X specifies a 10ms
+ * interval. SGMII specifies a 1.6ms interval.
+ */
+ gmp_misc_ctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface));
+ /* Adjust the MAC mode if requested by device tree */
+ gmp_misc_ctl.s.mac_phy = cvmx_helper_get_mac_phy_mode(xiface, index);
+ gmp_misc_ctl.s.mode = cvmx_helper_get_1000x_mode(xiface, index);
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface),
+ gmp_misc_ctl.u64);
+
+ gmp_timer.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_LINKX_TIMER(index, xi.interface));
+ if (gmp_misc_ctl.s.mode)
+ /* 1000BASE-X */
+ gmp_timer.s.count = (10000ull * clock_mhz) >> 10;
+ else
+ /* SGMII */
+ gmp_timer.s.count = (1600ull * clock_mhz) >> 10;
+
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_LINKX_TIMER(index, xi.interface),
+ gmp_timer.u64);
+
+ /*
+ * Write the advertisement register to be used as the
+ * tx_Config_Reg<D15:D0> of the autonegotiation. In
+ * 1000BASE-X mode, tx_Config_Reg<D15:D0> is PCS*_AN*_ADV_REG.
+ * In SGMII PHY mode, tx_Config_Reg<D15:D0> is
+ * PCS*_SGM*_AN_ADV_REG. In SGMII MAC mode,
+ * tx_Config_Reg<D15:D0> is the fixed value 0x4001, so this
+ * step can be skipped.
+ */
+ if (gmp_misc_ctl.s.mode) {
+ /* 1000BASE-X */
+ cvmx_bgxx_gmp_pcs_anx_adv_t gmp_an_adv;
+
+ gmp_an_adv.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_ANX_ADV(index, xi.interface));
+ gmp_an_adv.s.rem_flt = 0;
+ gmp_an_adv.s.pause = 3;
+ gmp_an_adv.s.hfd = 1;
+ gmp_an_adv.s.fd = 1;
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_PCS_ANX_ADV(index, xi.interface),
+ gmp_an_adv.u64);
+ } else {
+ if (gmp_misc_ctl.s.mac_phy) {
+ /* PHY Mode */
+ cvmx_bgxx_gmp_pcs_sgmx_an_adv_t gmp_sgmx_an_adv;
+
+ gmp_sgmx_an_adv.u64 =
+ csr_rd_node(node, CVMX_BGXX_GMP_PCS_SGMX_AN_ADV(
+ index, xi.interface));
+ gmp_sgmx_an_adv.s.dup = 1;
+ gmp_sgmx_an_adv.s.speed = 2;
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_PCS_SGMX_AN_ADV(index,
+ xi.interface),
+ gmp_sgmx_an_adv.u64);
+ } else {
+ /* MAC Mode - Nothing to do */
+ }
+ }
+ return 0;
+}
+
+/**
+ * @INTERNAL
+ * Bring up the SGMII interface to be ready for packet I/O but
+ * leave I/O disabled using the GMX override. This function
+ * follows the bringup documented in 10.6.3 of the manual.
+ *
+ * @param xiface Interface to bringup
+ * @param num_ports Number of ports on the interface
+ *
+ * @return Zero on success, negative on failure
+ */
+static int __cvmx_helper_bgx_sgmii_hardware_init(int xiface, int num_ports)
+{
+ int index;
+ int do_link_set = 1;
+
+ for (index = 0; index < num_ports; index++) {
+ int xipd_port = cvmx_helper_get_ipd_port(xiface, index);
+ cvmx_helper_interface_mode_t mode;
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ continue;
+
+ __cvmx_helper_bgx_port_init(xipd_port, 0);
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RGMII)
+ continue;
+
+ if (do_link_set)
+ __cvmx_helper_bgx_sgmii_link_set(
+ xipd_port,
+ __cvmx_helper_bgx_sgmii_link_get(xipd_port));
+ }
+
+ return 0;
+}
+
+/**
+ * @INTERNAL
+ * Bringup and enable a SGMII interface. After this call packet
+ * I/O should be fully functional. This is called with IPD
+ * enabled but PKO disabled. This is used by interfaces using
+ * the bgx mac.
+ *
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_bgx_sgmii_enable(int xiface)
+{
+ int num_ports;
+
+ num_ports = cvmx_helper_ports_on_interface(xiface);
+ __cvmx_helper_bgx_sgmii_hardware_init(xiface, num_ports);
+
+ return 0;
+}
+
+/**
+ * @INTERNAL
+ * Initialize the SERDES link for the first time or after a loss
+ * of link.
+ *
+ * @param xiface Interface to init
+ * @param index Index of prot on the interface
+ *
+ * @return Zero on success, negative on failure
+ */
+static int __cvmx_helper_bgx_sgmii_hardware_init_link(int xiface, int index)
+{
+ cvmx_bgxx_gmp_pcs_mrx_control_t gmp_control;
+ cvmx_bgxx_gmp_pcs_miscx_ctl_t gmp_misc_ctl;
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ int phy_mode, mode_1000x;
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ int interface = xi.interface;
+ int node = xi.node;
+ int autoneg = 0;
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ return 0;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ gmp_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface));
+ /* Take PCS through a reset sequence */
+ gmp_control.s.reset = 1;
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface),
+ gmp_control.u64);
+
+ /* Wait until GMP_PCS_MRX_CONTROL[reset] comes out of reset */
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface),
+ cvmx_bgxx_gmp_pcs_mrx_control_t, reset, ==, 0, 10000)) {
+ debug("SGMII%d: Timeout waiting for port %d to finish reset\n",
+ interface, index);
+ return -1;
+ }
+
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+
+ gmp_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface));
+ if (cvmx_helper_get_port_phy_present(xiface, index)) {
+ gmp_control.s.pwr_dn = 0;
+ } else {
+ gmp_control.s.spdmsb = 1;
+ gmp_control.s.spdlsb = 0;
+ gmp_control.s.pwr_dn = 0;
+ }
+ /* Write GMP_PCS_MR*_CONTROL[RST_AN]=1 to ensure a fresh SGMII
+ * negotiation starts.
+ */
+ autoneg = cvmx_helper_get_port_autonegotiation(xiface, index);
+ gmp_control.s.rst_an = 1;
+ gmp_control.s.an_en = (cmr_config.s.lmac_type != 5) && autoneg;
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface),
+ gmp_control.u64);
+
+ phy_mode = cvmx_helper_get_mac_phy_mode(xiface, index);
+ mode_1000x = cvmx_helper_get_1000x_mode(xiface, index);
+
+ gmp_misc_ctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface));
+ gmp_misc_ctl.s.mac_phy = phy_mode;
+ gmp_misc_ctl.s.mode = mode_1000x;
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface),
+ gmp_misc_ctl.u64);
+
+ if (phy_mode || !autoneg)
+ /* In PHY mode we can't query the link status so we just
+ * assume that the link is up
+ */
+ return 0;
+
+ /* Wait for GMP_PCS_MRX_CONTROL[an_cpt] to be set, indicating that
+ * SGMII autonegotiation is complete. In MAC mode this isn't an
+ * ethernet link, but a link between OCTEON and PHY.
+ */
+ if (cmr_config.s.lmac_type != 5 &&
+ CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_GMP_PCS_MRX_STATUS(index, xi.interface),
+ cvmx_bgxx_gmp_pcs_mrx_status_t, an_cpt, ==, 1, 10000)) {
+ debug("SGMII%d: Port %d link timeout\n", interface, index);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * @INTERNAL
+ * Configure an SGMII link to the specified speed after the SERDES
+ * link is up.
+ *
+ * @param xiface Interface to init
+ * @param index Index of prot on the interface
+ * @param link_info Link state to configure
+ *
+ * @return Zero on success, negative on failure
+ */
+static int __cvmx_helper_bgx_sgmii_hardware_init_link_speed(
+ int xiface, int index, cvmx_helper_link_info_t link_info)
+{
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ cvmx_bgxx_gmp_pcs_miscx_ctl_t gmp_miscx_ctl;
+ cvmx_bgxx_gmp_gmi_prtx_cfg_t gmp_prtx_cfg;
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ int node = xi.node;
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ return 0;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ /* Disable GMX before we make any changes. */
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ cmr_config.s.data_pkt_tx_en = 0;
+ cmr_config.s.data_pkt_rx_en = 0;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+
+ /* Wait for GMX to be idle */
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_GMP_GMI_PRTX_CFG(index, xi.interface),
+ cvmx_bgxx_gmp_gmi_prtx_cfg_t, rx_idle, ==, 1, 10000) ||
+ CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_GMP_GMI_PRTX_CFG(index, xi.interface),
+ cvmx_bgxx_gmp_gmi_prtx_cfg_t, tx_idle, ==, 1, 10000)) {
+ debug("SGMII%d:%d: Timeout waiting for port %d to be idle\n",
+ node, xi.interface, index);
+ return -1;
+ }
+
+ /* Read GMX CFG again to make sure the disable completed */
+ gmp_prtx_cfg.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_GMI_PRTX_CFG(index, xi.interface));
+
+ /*
+ * Get the misc control for PCS. We will need to set the
+ * duplication amount.
+ */
+ gmp_miscx_ctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface));
+
+ /*
+ * Use GMXENO to force the link down if the status we get says
+ * it should be down.
+ */
+ gmp_miscx_ctl.s.gmxeno = !link_info.s.link_up;
+
+ /* Only change the duplex setting if the link is up */
+ if (link_info.s.link_up)
+ gmp_prtx_cfg.s.duplex = link_info.s.full_duplex;
+
+ /* Do speed based setting for GMX */
+ switch (link_info.s.speed) {
+ case 10:
+ gmp_prtx_cfg.s.speed = 0;
+ gmp_prtx_cfg.s.speed_msb = 1;
+ gmp_prtx_cfg.s.slottime = 0;
+ /* Setting from GMX-603 */
+ gmp_miscx_ctl.s.samp_pt = 25;
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_GMI_TXX_SLOT(index, xi.interface),
+ 64);
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_GMI_TXX_BURST(index, xi.interface),
+ 0);
+ break;
+ case 100:
+ gmp_prtx_cfg.s.speed = 0;
+ gmp_prtx_cfg.s.speed_msb = 0;
+ gmp_prtx_cfg.s.slottime = 0;
+ gmp_miscx_ctl.s.samp_pt = 0x5;
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_GMI_TXX_SLOT(index, xi.interface),
+ 64);
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_GMI_TXX_BURST(index, xi.interface),
+ 0);
+ break;
+ case 1000:
+ gmp_prtx_cfg.s.speed = 1;
+ gmp_prtx_cfg.s.speed_msb = 0;
+ gmp_prtx_cfg.s.slottime = 1;
+ gmp_miscx_ctl.s.samp_pt = 1;
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_GMI_TXX_SLOT(index, xi.interface),
+ 512);
+ if (gmp_prtx_cfg.s.duplex)
+ /* full duplex */
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_GMI_TXX_BURST(index,
+ xi.interface),
+ 0);
+ else
+ /* half duplex */
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_GMI_TXX_BURST(index,
+ xi.interface),
+ 8192);
+ break;
+ default:
+ break;
+ }
+
+ /* Write the new misc control for PCS */
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface),
+ gmp_miscx_ctl.u64);
+
+ /* Write the new GMX settings with the port still disabled */
+ csr_wr_node(node, CVMX_BGXX_GMP_GMI_PRTX_CFG(index, xi.interface),
+ gmp_prtx_cfg.u64);
+
+ /* Read GMX CFG again to make sure the config completed */
+ csr_rd_node(node, CVMX_BGXX_GMP_GMI_PRTX_CFG(index, xi.interface));
+
+ /* Enable back BGX. */
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ if (debug)
+ debug("%s: Enabling tx and rx packets on %d:%d\n", __func__,
+ xi.interface, index);
+ cmr_config.s.data_pkt_tx_en = 1;
+ cmr_config.s.data_pkt_rx_en = 1;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+
+ return 0;
+}
+
+/**
+ * @INTERNAL
+ * Return the link state of an IPD/PKO port as returned by
+ * auto negotiation. The result of this function may not match
+ * Octeon's link config if auto negotiation has changed since
+ * the last call to cvmx_helper_link_set(). This is used by
+ * interfaces using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to query
+ *
+ * @return Link state
+ */
+cvmx_helper_link_info_t __cvmx_helper_bgx_sgmii_link_get(int xipd_port)
+{
+ cvmx_helper_link_info_t result;
+ cvmx_bgxx_gmp_pcs_mrx_control_t gmp_control;
+ cvmx_bgxx_gmp_pcs_miscx_ctl_t gmp_misc_ctl;
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ struct cvmx_xport xp = cvmx_helper_ipd_port_to_xport(xipd_port);
+ int node = xi.node;
+ int index = cvmx_helper_get_interface_index_num(xp.port);
+
+ result.u64 = 0;
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ return result;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ gmp_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface));
+ if (gmp_control.s.loopbck1) {
+ int qlm = cvmx_qlm_lmac(xiface, index);
+ int speed;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ speed = cvmx_qlm_get_gbaud_mhz_node(node, qlm);
+ else
+ speed = cvmx_qlm_get_gbaud_mhz(qlm);
+ /* Force 1Gbps full duplex link for internal loopback */
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ result.s.speed = speed * 8 / 10;
+ return result;
+ }
+
+ gmp_misc_ctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface));
+ if (gmp_misc_ctl.s.mac_phy ||
+ cvmx_helper_get_port_force_link_up(xiface, index)) {
+ int qlm = cvmx_qlm_lmac(xiface, index);
+ int speed;
+
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ speed = cvmx_qlm_get_gbaud_mhz_node(node, qlm);
+ else
+ speed = cvmx_qlm_get_gbaud_mhz(qlm);
+ /* PHY Mode */
+ /* Note that this also works for 1000base-X mode */
+
+ result.s.speed = speed * 8 / 10;
+ result.s.full_duplex = 1;
+ result.s.link_up = 1;
+ return result;
+ }
+
+ /* MAC Mode */
+ return __cvmx_helper_board_link_get(xipd_port);
+}
+
+/**
+ * This sequence brings down the link for the XCV RGMII interface
+ *
+ * @param interface Interface (BGX) number. Port index is always 0
+ */
+static void __cvmx_helper_bgx_rgmii_link_set_down(int interface)
+{
+ union cvmx_xcv_reset xcv_reset;
+ union cvmx_bgxx_cmrx_config cmr_config;
+ union cvmx_bgxx_gmp_pcs_mrx_control mr_control;
+ union cvmx_bgxx_cmrx_rx_fifo_len rx_fifo_len;
+ union cvmx_bgxx_cmrx_tx_fifo_len tx_fifo_len;
+
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.rx_pkt_rst_n = 0;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+ csr_rd(CVMX_XCV_RESET);
+ mdelay(10); /* Wait for 1 MTU */
+
+ cmr_config.u64 = csr_rd(CVMX_BGXX_CMRX_CONFIG(0, interface));
+ cmr_config.s.data_pkt_rx_en = 0;
+ csr_wr(CVMX_BGXX_CMRX_CONFIG(0, interface), cmr_config.u64);
+
+ /* Wait for RX and TX to be idle */
+ do {
+ rx_fifo_len.u64 =
+ csr_rd(CVMX_BGXX_CMRX_RX_FIFO_LEN(0, interface));
+ tx_fifo_len.u64 =
+ csr_rd(CVMX_BGXX_CMRX_TX_FIFO_LEN(0, interface));
+ } while (rx_fifo_len.s.fifo_len > 0 && tx_fifo_len.s.lmac_idle != 1);
+
+ cmr_config.u64 = csr_rd(CVMX_BGXX_CMRX_CONFIG(0, interface));
+ cmr_config.s.data_pkt_tx_en = 0;
+ csr_wr(CVMX_BGXX_CMRX_CONFIG(0, interface), cmr_config.u64);
+
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.tx_pkt_rst_n = 0;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+ mr_control.u64 = csr_rd(CVMX_BGXX_GMP_PCS_MRX_CONTROL(0, interface));
+ mr_control.s.pwr_dn = 1;
+ csr_wr(CVMX_BGXX_GMP_PCS_MRX_CONTROL(0, interface), mr_control.u64);
+}
+
+/**
+ * Sets a BGS SGMII link down.
+ *
+ * @param node Octeon node number
+ * @param iface BGX interface number
+ * @param index BGX port index
+ */
+static void __cvmx_helper_bgx_sgmii_link_set_down(int node, int iface,
+ int index)
+{
+ union cvmx_bgxx_gmp_pcs_miscx_ctl gmp_misc_ctl;
+ union cvmx_bgxx_gmp_pcs_mrx_control gmp_control;
+ union cvmx_bgxx_cmrx_config cmr_config;
+
+ cmr_config.u64 = csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, iface));
+ cmr_config.s.data_pkt_tx_en = 0;
+ cmr_config.s.data_pkt_rx_en = 0;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, iface), cmr_config.u64);
+
+ gmp_misc_ctl.u64 =
+ csr_rd_node(node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, iface));
+
+ /* Disable autonegotiation only when in MAC mode. */
+ if (gmp_misc_ctl.s.mac_phy == 0) {
+ gmp_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, iface));
+ gmp_control.s.an_en = 0;
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, iface),
+ gmp_control.u64);
+ }
+
+ /* Use GMXENO to force the link down. It will get reenabled later... */
+ gmp_misc_ctl.s.gmxeno = 1;
+ csr_wr_node(node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, iface),
+ gmp_misc_ctl.u64);
+ csr_rd_node(node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, iface));
+}
+
+/**
+ * @INTERNAL
+ * Configure an IPD/PKO port for the specified link state. This
+ * function does not influence auto negotiation at the PHY level.
+ * The passed link state must always match the link state returned
+ * by cvmx_helper_link_get(). It is normally best to use
+ * cvmx_helper_link_autoconf() instead. This is used by interfaces
+ * using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to configure
+ * @param link_info The new link state
+ *
+ * @return Zero on success, negative on failure
+ */
+int __cvmx_helper_bgx_sgmii_link_set(int xipd_port,
+ cvmx_helper_link_info_t link_info)
+{
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ struct cvmx_xport xp = cvmx_helper_ipd_port_to_xport(xipd_port);
+ int node = xi.node;
+ int index = cvmx_helper_get_interface_index_num(xp.port);
+ const int iface = xi.interface;
+ int rc = 0;
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ return 0;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ cmr_config.u64 = csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, iface));
+ if (link_info.s.link_up) {
+ cmr_config.s.enable = 1;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, iface),
+ cmr_config.u64);
+ /* Apply workaround for errata BGX-22429 */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && index) {
+ cvmx_bgxx_cmrx_config_t cmr0;
+
+ cmr0.u64 = csr_rd_node(node,
+ CVMX_BGXX_CMRX_CONFIG(0, iface));
+ cmr0.s.enable = 1;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(0, iface),
+ cmr0.u64);
+ }
+ __cvmx_helper_bgx_sgmii_hardware_init_link(xiface, index);
+ } else if (cvmx_helper_bgx_is_rgmii(xi.interface, index)) {
+ if (debug)
+ debug("%s: Bringing down XCV RGMII interface %d\n",
+ __func__, xi.interface);
+ __cvmx_helper_bgx_rgmii_link_set_down(xi.interface);
+ } else { /* Link is down, not RGMII */
+ __cvmx_helper_bgx_sgmii_link_set_down(node, iface, index);
+ return 0;
+ }
+ rc = __cvmx_helper_bgx_sgmii_hardware_init_link_speed(xiface, index,
+ link_info);
+ if (cvmx_helper_bgx_is_rgmii(xiface, index))
+ rc = __cvmx_helper_bgx_rgmii_speed(link_info);
+
+ return rc;
+}
+
+/**
+ * @INTERNAL
+ * Bringup XAUI interface. After this call packet I/O should be
+ * fully functional.
+ *
+ * @param index port on interface to bring up
+ * @param xiface Interface to bring up
+ *
+ * @return Zero on success, negative on failure
+ */
+static int __cvmx_helper_bgx_xaui_init(int index, int xiface)
+{
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ cvmx_bgxx_spux_br_pmd_control_t pmd_control;
+ cvmx_bgxx_spux_misc_control_t spu_misc_control;
+ cvmx_bgxx_spux_control1_t spu_control1;
+ cvmx_bgxx_spux_an_control_t spu_an_control;
+ cvmx_bgxx_spux_an_adv_t spu_an_adv;
+ cvmx_bgxx_spux_fec_control_t spu_fec_control;
+ cvmx_bgxx_spu_dbg_control_t spu_dbg_control;
+ cvmx_bgxx_smux_tx_append_t smu_tx_append;
+ cvmx_bgxx_smux_tx_ctl_t smu_tx_ctl;
+ cvmx_helper_interface_mode_t mode;
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ int interface = xi.interface;
+ int node = xi.node;
+ int use_auto_neg = 0;
+ int kr_mode = 0;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+
+ if (mode == CVMX_HELPER_INTERFACE_MODE_10G_KR ||
+ mode == CVMX_HELPER_INTERFACE_MODE_40G_KR4) {
+ kr_mode = 1;
+ if (cvmx_helper_bgx_override_autoneg)
+ use_auto_neg =
+ cvmx_helper_bgx_override_autoneg(xiface, index);
+ else
+ use_auto_neg = cvmx_helper_get_port_autonegotiation(
+ xiface, index);
+ }
+
+ /* NOTE: This code was moved first, out of order compared to the HRM
+ * because the RESET causes all SPU registers to loose their value
+ */
+ /* 4. Next, bring up the SMU/SPU and the BGX reconciliation layer
+ * logic:
+ */
+ /* 4a. Take SMU/SPU through a reset sequence. Write
+ * BGX(0..5)_SPU(0..3)_CONTROL1[RESET] = 1. Read
+ * BGX(0..5)_SPU(0..3)_CONTROL1[RESET] until it changes value to 0. Keep
+ * BGX(0..5)_SPU(0..3)_MISC_CONTROL[RX_PACKET_DIS] = 1 to disable
+ * reception.
+ */
+ spu_control1.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface));
+ spu_control1.s.reset = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface),
+ spu_control1.u64);
+
+ /* 1. Wait for PCS to come out of reset */
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface),
+ cvmx_bgxx_spux_control1_t, reset, ==, 0, 10000)) {
+ debug("BGX%d:%d: SPU stuck in reset\n", node, interface);
+ return -1;
+ }
+
+ /* 2. Write BGX(0..5)_CMR(0..3)_CONFIG[ENABLE] to 0,
+ * BGX(0..5)_SPU(0..3)_CONTROL1[LO_PWR] = 1 and
+ * BGX(0..5)_SPU(0..3)_MISC_CONTROL[RX_PACKET_DIS] = 1.
+ */
+ spu_control1.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface));
+ spu_control1.s.lo_pwr = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface),
+ spu_control1.u64);
+
+ spu_misc_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface));
+ spu_misc_control.s.rx_packet_dis = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface),
+ spu_misc_control.u64);
+
+ /* 3. At this point, it may be appropriate to disable all BGX and
+ * SMU/SPU interrupts, as a number of them will occur during bring-up
+ * of the Link.
+ * - zero BGX(0..5)_SMU(0..3)_RX_INT
+ * - zero BGX(0..5)_SMU(0..3)_TX_INT
+ * - zero BGX(0..5)_SPU(0..3)_INT
+ */
+ csr_wr_node(node, CVMX_BGXX_SMUX_RX_INT(index, xi.interface),
+ csr_rd_node(node,
+ CVMX_BGXX_SMUX_RX_INT(index, xi.interface)));
+ csr_wr_node(node, CVMX_BGXX_SMUX_TX_INT(index, xi.interface),
+ csr_rd_node(node,
+ CVMX_BGXX_SMUX_TX_INT(index, xi.interface)));
+ csr_wr_node(node, CVMX_BGXX_SPUX_INT(index, xi.interface),
+ csr_rd_node(node, CVMX_BGXX_SPUX_INT(index, xi.interface)));
+
+ /* 4. Configure the BGX LMAC. */
+ /* 4a. Configure the LMAC type (40GBASE-R/10GBASE-R/RXAUI/XAUI) and
+ * SerDes selection in the BGX(0..5)_CMR(0..3)_CONFIG register, but keep
+ * the ENABLE, DATA_PKT_TX_EN and DATA_PKT_RX_EN bits clear.
+ */
+ /* Already done in bgx_setup_one_time */
+
+ /* 4b. Write BGX(0..5)_SPU(0..3)_CONTROL1[LO_PWR] = 1 and
+ * BGX(0..5)_SPU(0..3)_MISC_CONTROL[RX_PACKET_DIS] = 1.
+ */
+ /* 4b. Initialize the selected SerDes lane(s) in the QLM. See Section
+ * 28.1.2.2 in the GSER chapter.
+ */
+ /* Already done in QLM setup */
+
+ /* 4c. For 10GBASE-KR or 40GBASE-KR, enable link training by writing
+ * BGX(0..5)_SPU(0..3)_BR_PMD_CONTROL[TRAIN_EN] = 1.
+ */
+
+ if (kr_mode && !OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_BR_PMD_LP_CUP(index, interface), 0);
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_BR_PMD_LD_CUP(index, interface), 0);
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_BR_PMD_LD_REP(index, interface), 0);
+ pmd_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, interface));
+ pmd_control.s.train_en = 1;
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, interface),
+ pmd_control.u64);
+ }
+
+ /* 4d. Program all other relevant BGX configuration while
+ * BGX(0..5)_CMR(0..3)_CONFIG[ENABLE] = 0. This includes all things
+ * described in this chapter.
+ */
+ /* Always add FCS to PAUSE frames */
+ smu_tx_append.u64 = csr_rd_node(
+ node, CVMX_BGXX_SMUX_TX_APPEND(index, xi.interface));
+ smu_tx_append.s.fcs_c = 1;
+ csr_wr_node(node, CVMX_BGXX_SMUX_TX_APPEND(index, xi.interface),
+ smu_tx_append.u64);
+
+ /* 4e. If Forward Error Correction is desired for 10GBASE-R or
+ * 40GBASE-R, enable it by writing
+ * BGX(0..5)_SPU(0..3)_FEC_CONTROL[FEC_EN] = 1.
+ */
+ /* FEC is optional for 10GBASE-KR, 40GBASE-KR4, and XLAUI. We're going
+ * to disable it by default
+ */
+ spu_fec_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_FEC_CONTROL(index, xi.interface));
+ if (cvmx_helper_bgx_override_fec)
+ spu_fec_control.s.fec_en =
+ cvmx_helper_bgx_override_fec(xiface, index);
+ else
+ spu_fec_control.s.fec_en =
+ cvmx_helper_get_port_fec(xiface, index);
+ csr_wr_node(node, CVMX_BGXX_SPUX_FEC_CONTROL(index, xi.interface),
+ spu_fec_control.u64);
+
+ /* 4f. If Auto-Negotiation is desired, configure and enable
+ * Auto-Negotiation as described in Section 33.6.2.
+ */
+ spu_an_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_AN_CONTROL(index, xi.interface));
+ /* Disable extended next pages */
+ spu_an_control.s.xnp_en = 0;
+ spu_an_control.s.an_en = use_auto_neg;
+ csr_wr_node(node, CVMX_BGXX_SPUX_AN_CONTROL(index, xi.interface),
+ spu_an_control.u64);
+
+ spu_fec_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_FEC_CONTROL(index, xi.interface));
+ spu_an_adv.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_AN_ADV(index, xi.interface));
+ spu_an_adv.s.fec_req = spu_fec_control.s.fec_en;
+ spu_an_adv.s.fec_able = 1;
+ spu_an_adv.s.a100g_cr10 = 0;
+ spu_an_adv.s.a40g_cr4 = 0;
+ spu_an_adv.s.a40g_kr4 = (mode == CVMX_HELPER_INTERFACE_MODE_40G_KR4);
+ spu_an_adv.s.a10g_kr = (mode == CVMX_HELPER_INTERFACE_MODE_10G_KR);
+ spu_an_adv.s.a10g_kx4 = 0;
+ spu_an_adv.s.a1g_kx = 0;
+ spu_an_adv.s.xnp_able = 0;
+ spu_an_adv.s.rf = 0;
+ csr_wr_node(node, CVMX_BGXX_SPUX_AN_ADV(index, xi.interface),
+ spu_an_adv.u64);
+
+ /* 3. Set BGX(0..5)_SPU_DBG_CONTROL[AN_ARB_LINK_CHK_EN] = 1. */
+ spu_dbg_control.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPU_DBG_CONTROL(xi.interface));
+ spu_dbg_control.s.an_nonce_match_dis = 1; /* Needed for loopback */
+ spu_dbg_control.s.an_arb_link_chk_en |= kr_mode;
+ csr_wr_node(node, CVMX_BGXX_SPU_DBG_CONTROL(xi.interface),
+ spu_dbg_control.u64);
+
+ /* 4. Execute the link bring-up sequence in Section 33.6.3. */
+
+ /* 5. If the auto-negotiation protocol is successful,
+ * BGX(0..5)_SPU(0..3)_AN_ADV[AN_COMPLETE] is set along with
+ * BGX(0..5)_SPU(0..3)_INT[AN_COMPLETE] when the link is up.
+ */
+
+ /* 3h. Set BGX(0..5)_CMR(0..3)_CONFIG[ENABLE] = 1 and
+ * BGX(0..5)_SPU(0..3)_CONTROL1[LO_PWR] = 0 to enable the LMAC.
+ */
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ cmr_config.s.enable = 1;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+ /* Apply workaround for errata BGX-22429 */
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && index) {
+ cvmx_bgxx_cmrx_config_t cmr0;
+
+ cmr0.u64 = csr_rd_node(node,
+ CVMX_BGXX_CMRX_CONFIG(0, xi.interface));
+ cmr0.s.enable = 1;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(0, xi.interface),
+ cmr0.u64);
+ }
+
+ spu_control1.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface));
+ spu_control1.s.lo_pwr = 0;
+ csr_wr_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface),
+ spu_control1.u64);
+
+ /* 4g. Set the polarity and lane swapping of the QLM SerDes. Refer to
+ * Section 33.4.1, BGX(0..5)_SPU(0..3)_MISC_CONTROL[XOR_TXPLRT,XOR_RXPLRT]
+ * and BGX(0..5)_SPU(0..3)_MISC_CONTROL[TXPLRT,RXPLRT].
+ */
+
+ /* 4c. Write BGX(0..5)_SPU(0..3)_CONTROL1[LO_PWR] = 0. */
+ spu_control1.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface));
+ spu_control1.s.lo_pwr = 0;
+ csr_wr_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface),
+ spu_control1.u64);
+
+ /* 4d. Select Deficit Idle Count mode and unidirectional enable/disable
+ * via BGX(0..5)_SMU(0..3)_TX_CTL[DIC_EN,UNI_EN].
+ */
+ smu_tx_ctl.u64 =
+ csr_rd_node(node, CVMX_BGXX_SMUX_TX_CTL(index, xi.interface));
+ smu_tx_ctl.s.dic_en = 1;
+ smu_tx_ctl.s.uni_en = 0;
+ csr_wr_node(node, CVMX_BGXX_SMUX_TX_CTL(index, xi.interface),
+ smu_tx_ctl.u64);
+
+ {
+ /* Calculate the number of s-clk cycles per usec. */
+ const u64 clock_mhz = 1200; /* todo: fixme */
+ cvmx_bgxx_spu_dbg_control_t dbg_control;
+
+ dbg_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPU_DBG_CONTROL(xi.interface));
+ dbg_control.s.us_clk_period = clock_mhz - 1;
+ csr_wr_node(node, CVMX_BGXX_SPU_DBG_CONTROL(xi.interface),
+ dbg_control.u64);
+ }
+ /* The PHY often takes at least 100ms to stabilize */
+ __cvmx_helper_bgx_interface_enable_delay(mode);
+ return 0;
+}
+
+static void __cvmx_bgx_start_training(int node, int unit, int index)
+{
+ cvmx_bgxx_spux_int_t spu_int;
+ cvmx_bgxx_spux_br_pmd_control_t pmd_control;
+ cvmx_bgxx_spux_an_control_t an_control;
+
+ /* Clear the training interrupts (W1C) */
+ spu_int.u64 = 0;
+ spu_int.s.training_failure = 1;
+ spu_int.s.training_done = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_INT(index, unit), spu_int.u64);
+
+ /* These registers aren't cleared when training is restarted. Manually
+ * clear them as per Errata BGX-20968.
+ */
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_LP_CUP(index, unit), 0);
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_LD_CUP(index, unit), 0);
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_LD_REP(index, unit), 0);
+
+ /* Disable autonegotiation */
+ an_control.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_AN_CONTROL(index, unit));
+ an_control.s.an_en = 0;
+ csr_wr_node(node, CVMX_BGXX_SPUX_AN_CONTROL(index, unit),
+ an_control.u64);
+ udelay(1);
+
+ /* Restart training */
+ pmd_control.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, unit));
+ pmd_control.s.train_en = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, unit),
+ pmd_control.u64);
+
+ udelay(1);
+ pmd_control.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, unit));
+ pmd_control.s.train_restart = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, unit),
+ pmd_control.u64);
+}
+
+static void __cvmx_bgx_restart_training(int node, int unit, int index)
+{
+ cvmx_bgxx_spux_int_t spu_int;
+ cvmx_bgxx_spux_br_pmd_control_t pmd_control;
+
+ /* Clear the training interrupts (W1C) */
+ spu_int.u64 = 0;
+ spu_int.s.training_failure = 1;
+ spu_int.s.training_done = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_INT(index, unit), spu_int.u64);
+
+ udelay(1700); /* Wait 1.7 msec */
+
+ /* These registers aren't cleared when training is restarted. Manually
+ * clear them as per Errata BGX-20968.
+ */
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_LP_CUP(index, unit), 0);
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_LD_CUP(index, unit), 0);
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_LD_REP(index, unit), 0);
+
+ /* Restart training */
+ pmd_control.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, unit));
+ pmd_control.s.train_restart = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, unit),
+ pmd_control.u64);
+}
+
+/*
+ * @INTERNAL
+ * Wrapper function to configure the BGX, does not enable.
+ *
+ * @param xipd_port IPD/PKO port to configure.
+ * @param phy_pres If set, enable disparity, only applies to RXAUI interface
+ *
+ * @return Zero on success, negative on failure.
+ */
+int __cvmx_helper_bgx_port_init(int xipd_port, int phy_pres)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ struct cvmx_xport xp = cvmx_helper_ipd_port_to_xport(xipd_port);
+ int index = cvmx_helper_get_interface_index_num(xp.port);
+ cvmx_helper_interface_mode_t mode;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+
+ __cvmx_bgx_common_init_pknd(xiface, index);
+
+ if (mode == CVMX_HELPER_INTERFACE_MODE_SGMII ||
+ mode == CVMX_HELPER_INTERFACE_MODE_RGMII) {
+ cvmx_bgxx_gmp_gmi_txx_thresh_t gmi_tx_thresh;
+ cvmx_bgxx_gmp_gmi_txx_append_t gmp_txx_append;
+ cvmx_bgxx_gmp_gmi_txx_sgmii_ctl_t gmp_sgmii_ctl;
+
+ /* Set TX Threshold */
+ gmi_tx_thresh.u64 = 0;
+ gmi_tx_thresh.s.cnt = 0x20;
+ csr_wr_node(xi.node,
+ CVMX_BGXX_GMP_GMI_TXX_THRESH(index, xi.interface),
+ gmi_tx_thresh.u64);
+ __cvmx_helper_bgx_sgmii_hardware_init_one_time(xiface, index);
+ gmp_txx_append.u64 = csr_rd_node(
+ xi.node,
+ CVMX_BGXX_GMP_GMI_TXX_APPEND(index, xi.interface));
+ gmp_sgmii_ctl.u64 = csr_rd_node(
+ xi.node,
+ CVMX_BGXX_GMP_GMI_TXX_SGMII_CTL(index, xi.interface));
+ gmp_sgmii_ctl.s.align = gmp_txx_append.s.preamble ? 0 : 1;
+ csr_wr_node(xi.node,
+ CVMX_BGXX_GMP_GMI_TXX_SGMII_CTL(index,
+ xi.interface),
+ gmp_sgmii_ctl.u64);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RGMII) {
+ /* Disable XCV interface when initialized */
+ union cvmx_xcv_reset xcv_reset;
+
+ if (debug)
+ debug("%s: Disabling RGMII XCV interface\n",
+ __func__);
+ xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
+ xcv_reset.s.enable = 0;
+ xcv_reset.s.tx_pkt_rst_n = 0;
+ xcv_reset.s.rx_pkt_rst_n = 0;
+ csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
+ }
+ } else {
+ int res, cred;
+ cvmx_bgxx_smux_tx_thresh_t smu_tx_thresh;
+
+ res = __cvmx_helper_bgx_xaui_init(index, xiface);
+ if (res == -1) {
+#ifdef DEBUG_BGX
+ debug("Failed to enable XAUI for %d:BGX(%d,%d)\n",
+ xi.node, xi.interface, index);
+#endif
+ return res;
+ }
+ /* See BVX_SMU_TX_THRESH register descriptin */
+ cred = __cvmx_helper_bgx_fifo_size(xiface, index) >> 4;
+ smu_tx_thresh.u64 = 0;
+ smu_tx_thresh.s.cnt = cred - 10;
+ csr_wr_node(xi.node,
+ CVMX_BGXX_SMUX_TX_THRESH(index, xi.interface),
+ smu_tx_thresh.u64);
+ if (debug)
+ debug("%s: BGX%d:%d TX-thresh=%d\n", __func__,
+ xi.interface, index,
+ (unsigned int)smu_tx_thresh.s.cnt);
+
+ /* Set disparity for RXAUI interface as described in the
+ * Marvell RXAUI Interface specification.
+ */
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RXAUI && phy_pres) {
+ cvmx_bgxx_spux_misc_control_t misc_control;
+
+ misc_control.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_SPUX_MISC_CONTROL(
+ index, xi.interface));
+ misc_control.s.intlv_rdisp = 1;
+ csr_wr_node(xi.node,
+ CVMX_BGXX_SPUX_MISC_CONTROL(index,
+ xi.interface),
+ misc_control.u64);
+ }
+ }
+ return 0;
+}
+
+/**
+ * @INTERNAL
+ * Configure a port for internal and/or external loopback. Internal loopback
+ * causes packets sent by the port to be received by Octeon. External loopback
+ * causes packets received from the wire to sent out again. This is used by
+ * interfaces using the bgx mac.
+ *
+ * @param xipd_port IPD/PKO port to loopback.
+ * @param enable_internal
+ * Non zero if you want internal loopback
+ * @param enable_external
+ * Non zero if you want external loopback
+ *
+ * @return Zero on success, negative on failure.
+ */
+int __cvmx_helper_bgx_sgmii_configure_loopback(int xipd_port,
+ int enable_internal,
+ int enable_external)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ struct cvmx_xport xp = cvmx_helper_ipd_port_to_xport(xipd_port);
+ int node = xi.node;
+ int index = cvmx_helper_get_interface_index_num(xp.port);
+ cvmx_bgxx_gmp_pcs_mrx_control_t gmp_mrx_control;
+ cvmx_bgxx_gmp_pcs_miscx_ctl_t gmp_misc_ctl;
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ return 0;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ if (cvmx_helper_bgx_is_rgmii(xi.interface, index)) {
+ cvmx_xcv_ctl_t xcv_ctl;
+ cvmx_helper_link_info_t link_info;
+
+ xcv_ctl.u64 = csr_rd(CVMX_XCV_CTL);
+ xcv_ctl.s.lpbk_int = enable_internal;
+ xcv_ctl.s.lpbk_ext = enable_external;
+ csr_wr(CVMX_XCV_CTL, xcv_ctl.u64);
+
+ /* Initialize link and speed */
+ __cvmx_helper_bgx_sgmii_hardware_init_link(xiface, index);
+ link_info = __cvmx_helper_bgx_sgmii_link_get(xipd_port);
+ __cvmx_helper_bgx_sgmii_hardware_init_link_speed(xiface, index,
+ link_info);
+ __cvmx_helper_bgx_rgmii_speed(link_info);
+ } else {
+ gmp_mrx_control.u64 = csr_rd_node(
+ node,
+ CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface));
+ gmp_mrx_control.s.loopbck1 = enable_internal;
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_PCS_MRX_CONTROL(index, xi.interface),
+ gmp_mrx_control.u64);
+
+ gmp_misc_ctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface));
+ gmp_misc_ctl.s.loopbck2 = enable_external;
+ csr_wr_node(node,
+ CVMX_BGXX_GMP_PCS_MISCX_CTL(index, xi.interface),
+ gmp_misc_ctl.u64);
+ __cvmx_helper_bgx_sgmii_hardware_init_link(xiface, index);
+ }
+
+ return 0;
+}
+
+static int __cvmx_helper_bgx_xaui_link_init(int index, int xiface)
+{
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ int node = xi.node;
+ cvmx_bgxx_spux_status1_t spu_status1;
+ cvmx_bgxx_spux_status2_t spu_status2;
+ cvmx_bgxx_spux_br_status2_t br_status2;
+ cvmx_bgxx_spux_int_t spu_int;
+ cvmx_bgxx_spux_misc_control_t spu_misc_control;
+ cvmx_bgxx_spux_an_control_t spu_an_control;
+ cvmx_bgxx_spux_an_status_t spu_an_status;
+ cvmx_bgxx_spux_br_pmd_control_t pmd_control;
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ cvmx_helper_interface_mode_t mode;
+ int use_training = 0;
+ int rgmii_first = 0;
+ int qlm = cvmx_qlm_lmac(xiface, index);
+ int use_ber = 0;
+ u64 err_blks;
+ u64 ber_cnt;
+ u64 error_debounce;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ rgmii_first = cvmx_helper_bgx_is_rgmii(xi.interface, index);
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_10G_KR ||
+ mode == CVMX_HELPER_INTERFACE_MODE_40G_KR4)
+ use_training = 1;
+
+ if ((mode == CVMX_HELPER_INTERFACE_MODE_XFI ||
+ mode == CVMX_HELPER_INTERFACE_MODE_XLAUI ||
+ mode == CVMX_HELPER_INTERFACE_MODE_10G_KR ||
+ mode == CVMX_HELPER_INTERFACE_MODE_40G_KR4))
+ use_ber = 1;
+
+ /* Disable packet reception, CMR as well as SPU block */
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ cmr_config.s.data_pkt_tx_en = 0;
+ cmr_config.s.data_pkt_rx_en = 0;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+ spu_misc_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface));
+ spu_misc_control.s.rx_packet_dis = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface),
+ spu_misc_control.u64);
+
+ spu_an_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_AN_CONTROL(index, xi.interface));
+ if (spu_an_control.s.an_en) {
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ cvmx_bgxx_spux_int_t spu_int;
+
+ spu_int.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_INT(index, xi.interface));
+ if (!spu_int.s.an_link_good) {
+ static u64 restart_auto_neg[2][6][4] = {
+ [0 ... 1][0 ... 5] = { [0 ... 3] = 0 }
+ };
+ u64 now = get_timer(0);
+ u64 next_restart =
+ restart_auto_neg[node][xi.interface]
+ [index] +
+ 2000;
+
+ if (now >= next_restart)
+ return -1;
+
+ restart_auto_neg[node][xi.interface][index] =
+ now;
+
+ /* Clear the auto negotiation (W1C) */
+ spu_int.u64 = 0;
+ spu_int.s.an_complete = 1;
+ spu_int.s.an_link_good = 1;
+ spu_int.s.an_page_rx = 1;
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_INT(index,
+ xi.interface),
+ spu_int.u64);
+ /* Restart auto negotiation */
+ spu_an_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_AN_CONTROL(
+ index, xi.interface));
+ spu_an_control.s.an_restart = 1;
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_AN_CONTROL(
+ index, xi.interface),
+ spu_an_control.u64);
+ return -1;
+ }
+ } else {
+ spu_an_status.u64 = csr_rd_node(
+ node,
+ CVMX_BGXX_SPUX_AN_STATUS(index, xi.interface));
+ if (!spu_an_status.s.an_complete) {
+ static u64 restart_auto_neg[2][6][4] = {
+ [0 ... 1][0 ... 5] = { [0 ... 3] = 0 }
+ };
+ u64 now = get_timer(0);
+ u64 next_restart =
+ restart_auto_neg[node][xi.interface]
+ [index] +
+ 2000;
+ if (now >= next_restart) {
+#ifdef DEBUG_BGX
+ debug("WARNING: BGX%d:%d: Waiting for autoneg to complete\n",
+ xi.interface, index);
+#endif
+ return -1;
+ }
+
+ restart_auto_neg[node][xi.interface][index] =
+ now;
+ /* Restart auto negotiation */
+ spu_an_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_AN_CONTROL(
+ index, xi.interface));
+ spu_an_control.s.an_restart = 1;
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_AN_CONTROL(
+ index, xi.interface),
+ spu_an_control.u64);
+ return -1;
+ }
+ }
+ }
+
+ if (use_training) {
+ spu_int.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_INT(index, xi.interface));
+ pmd_control.u64 = csr_rd_node(
+ node,
+ CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, xi.interface));
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) &&
+ pmd_control.s.train_en == 0) {
+ __cvmx_bgx_start_training(node, xi.interface, index);
+ return -1;
+ }
+ cvmx_qlm_gser_errata_27882(node, qlm, index);
+ spu_int.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_INT(index, xi.interface));
+
+ if (spu_int.s.training_failure &&
+ !OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) {
+ __cvmx_bgx_restart_training(node, xi.interface, index);
+ return -1;
+ }
+ if (!spu_int.s.training_done) {
+ debug("Waiting for link training\n");
+ return -1;
+ }
+ }
+
+ /* (GSER-21957) GSER RX Equalization may make >= 5gbaud non-KR
+ * channel with DXAUI, RXAUI, XFI and XLAUI, we need to perform
+ * RX equalization when the link is receiving data the first time
+ */
+ if (use_training == 0) {
+ int lane = index;
+ cvmx_bgxx_spux_control1_t control1;
+
+ cmr_config.u64 = csr_rd_node(
+ node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ control1.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface));
+ if (control1.s.loopbck) {
+ /* Skip RX equalization when in loopback */
+ } else if (mode == CVMX_HELPER_INTERFACE_MODE_XLAUI ||
+ mode == CVMX_HELPER_INTERFACE_MODE_XAUI) {
+ lane = -1;
+ if (__cvmx_qlm_rx_equalization(node, qlm, lane)) {
+#ifdef DEBUG_BGX
+ debug("%d:%d:%d: Waiting for RX Equalization on QLM%d\n",
+ node, xi.interface, index, qlm);
+#endif
+ return -1;
+ }
+ /* If BGX2 uses both dlms, then configure other dlm also. */
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) &&
+ xi.interface == 2) {
+ if (__cvmx_qlm_rx_equalization(node, 6, lane)) {
+#ifdef DEBUG_BGX
+ debug("%d:%d:%d: Waiting for RX Equalization on QLM%d\n",
+ node, xi.interface, index, qlm);
+#endif
+ return -1;
+ }
+ }
+ /* RXAUI */
+ } else if (mode == CVMX_HELPER_INTERFACE_MODE_RXAUI) {
+ lane = index * 2;
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) && index >= 2 &&
+ xi.interface == 2) {
+ lane = 0;
+ }
+ if (rgmii_first)
+ lane--;
+ if (__cvmx_qlm_rx_equalization(node, qlm, lane) ||
+ __cvmx_qlm_rx_equalization(node, qlm, lane + 1)) {
+#ifdef DEBUG_BGX
+ debug("%d:%d:%d: Waiting for RX Equalization on QLM%d\n",
+ node, xi.interface, index, qlm);
+#endif
+ return -1;
+ }
+ /* XFI */
+ } else if (cmr_config.s.lmac_type != 5) {
+ if (rgmii_first)
+ lane--;
+ if (OCTEON_IS_MODEL(OCTEON_CN73XX) && index >= 2 &&
+ xi.interface == 2) {
+ lane = index - 2;
+ } else if (OCTEON_IS_MODEL(OCTEON_CNF75XX) &&
+ index >= 2) {
+ lane = index - 2;
+ }
+ if (__cvmx_qlm_rx_equalization(node, qlm, lane)) {
+#ifdef DEBUG_BGX
+ debug("%d:%d:%d: Waiting for RX Equalization on QLM%d\n",
+ node, xi.interface, index, qlm);
+#endif
+ return -1;
+ }
+ }
+ }
+
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface),
+ cvmx_bgxx_spux_control1_t, reset, ==, 0, 10000)) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: PCS in reset", node, xi.interface,
+ index);
+#endif
+ return -1;
+ }
+
+ if (use_ber) {
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node,
+ CVMX_BGXX_SPUX_BR_STATUS1(index, xi.interface),
+ cvmx_bgxx_spux_br_status1_t, blk_lock, ==, 1,
+ 10000)) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: BASE-R PCS block not locked\n",
+ node, xi.interface, index);
+
+ if (mode == CVMX_HELPER_INTERFACE_MODE_XLAUI ||
+ mode == CVMX_HELPER_INTERFACE_MODE_40G_KR4) {
+ cvmx_bgxx_spux_br_algn_status_t bstatus;
+
+ bstatus.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_BR_ALGN_STATUS(
+ index, xi.interface));
+ debug("ERROR: %d:BGX%d:%d: LANE BLOCK_LOCK:%x LANE MARKER_LOCK:%x\n",
+ node, xi.interface, index,
+ bstatus.s.block_lock,
+ bstatus.s.marker_lock);
+ }
+#endif
+ return -1;
+ }
+ } else {
+ /* (5) Check to make sure that the link appears up and stable.
+ */
+ /* Wait for PCS to be aligned */
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_SPUX_BX_STATUS(index, xi.interface),
+ cvmx_bgxx_spux_bx_status_t, alignd, ==, 1, 10000)) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: PCS not aligned\n", node,
+ xi.interface, index);
+#endif
+ return -1;
+ }
+ }
+
+ if (use_ber) {
+ /* Set the BGXX_SPUX_BR_STATUS2.latched_lock bit (latching low).
+ * This will be checked prior to enabling packet tx and rx,
+ * ensuring block lock is sustained throughout the BGX link-up
+ * procedure
+ */
+ br_status2.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_BR_STATUS2(index, xi.interface));
+ br_status2.s.latched_lock = 1;
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_BR_STATUS2(index, xi.interface),
+ br_status2.u64);
+ }
+
+ /* Clear rcvflt bit (latching high) and read it back */
+ spu_status2.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_STATUS2(index, xi.interface));
+ spu_status2.s.rcvflt = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_STATUS2(index, xi.interface),
+ spu_status2.u64);
+
+ spu_status2.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_STATUS2(index, xi.interface));
+ if (spu_status2.s.rcvflt) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: Receive fault, need to retry\n",
+ node, xi.interface, index);
+#endif
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && use_training)
+ __cvmx_bgx_restart_training(node, xi.interface, index);
+ /* debug("training restarting\n"); */
+ return -1;
+ }
+
+ /* Wait for MAC RX to be ready */
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_SMUX_RX_CTL(index, xi.interface),
+ cvmx_bgxx_smux_rx_ctl_t, status, ==, 0, 10000)) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: RX not ready\n", node, xi.interface,
+ index);
+#endif
+ return -1;
+ }
+
+ /* Wait for BGX RX to be idle */
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_SMUX_CTRL(index, xi.interface),
+ cvmx_bgxx_smux_ctrl_t, rx_idle, ==, 1, 10000)) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: RX not idle\n", node, xi.interface,
+ index);
+#endif
+ return -1;
+ }
+
+ /* Wait for GMX TX to be idle */
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_SMUX_CTRL(index, xi.interface),
+ cvmx_bgxx_smux_ctrl_t, tx_idle, ==, 1, 10000)) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: TX not idle\n", node, xi.interface,
+ index);
+#endif
+ return -1;
+ }
+
+ /* rcvflt should still be 0 */
+ spu_status2.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_STATUS2(index, xi.interface));
+ if (spu_status2.s.rcvflt) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: Receive fault, need to retry\n",
+ node, xi.interface, index);
+#endif
+ return -1;
+ }
+
+ /* Receive link is latching low. Force it high and verify it */
+ spu_status1.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_STATUS1(index, xi.interface));
+ spu_status1.s.rcv_lnk = 1;
+ csr_wr_node(node, CVMX_BGXX_SPUX_STATUS1(index, xi.interface),
+ spu_status1.u64);
+
+ if (CVMX_WAIT_FOR_FIELD64_NODE(
+ node, CVMX_BGXX_SPUX_STATUS1(index, xi.interface),
+ cvmx_bgxx_spux_status1_t, rcv_lnk, ==, 1, 10000)) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: Receive link down\n", node,
+ xi.interface, index);
+#endif
+ return -1;
+ }
+
+ if (use_ber) {
+ /* Clearing BER_CNT and ERR_BLKs */
+ br_status2.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_BR_STATUS2(index, xi.interface));
+
+ /* If set, clear the LATCHED_BER by writing it to a one. */
+ if (br_status2.s.latched_ber)
+ csr_wr_node(node,
+ CVMX_BGXX_SPUX_BR_STATUS2(index,
+ xi.interface),
+ br_status2.u64);
+
+ error_debounce = get_timer(0);
+
+ /* Clear error counts */
+ err_blks = 0;
+ ber_cnt = 0;
+
+ /* Verify that the link is up and error free for 100ms */
+ while (get_timer(error_debounce) < 100) {
+ spu_status1.u64 = csr_rd_node(
+ node,
+ CVMX_BGXX_SPUX_STATUS1(index, xi.interface));
+ /* Checking that Receive link is still up (rcv_lnk = 1 (up)) */
+ if (!spu_status1.s.rcv_lnk) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: Receive link down\n",
+ node, xi.interface, index);
+#endif
+ return -1;
+ }
+
+ /* Checking if latched_ber = 1 (BER >= 10e^4) */
+ br_status2.u64 = csr_rd_node(
+ node,
+ CVMX_BGXX_SPUX_BR_STATUS2(index, xi.interface));
+ err_blks += br_status2.s.err_blks;
+ ber_cnt += br_status2.s.ber_cnt;
+
+ if (br_status2.s.latched_ber) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: BER test failed, BER >= 10e^4, need to retry\n",
+ node, xi.interface, index);
+#endif
+ return -1;
+ }
+ /* Checking that latched BLOCK_LOCK is still set (Block Lock never lost) */
+ if (!br_status2.s.latched_lock) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: BASE-R PCS block lock lost, need to retry\n",
+ node, xi.interface, index);
+#endif
+ return -1;
+ }
+
+ /* Check error counters. Must be 0 (this error rate#
+ * is much higher than 1E-12)
+ */
+ if (err_blks > 0) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: BASE-R errored-blocks (%llu) detected, need to retry\n",
+ node, xi.interface, index,
+ (unsigned long long)err_blks);
+#endif
+ return -1;
+ }
+
+ if (ber_cnt > 0) {
+#ifdef DEBUG_BGX
+ debug("ERROR: %d:BGX%d:%d: BASE-R bit-errors (%llu) detected, need to retry\n",
+ node, xi.interface, index,
+ (unsigned long long)ber_cnt);
+#endif
+ return -1;
+ }
+
+ udelay(1000);
+ }
+
+ /* Clear out the BGX error counters/bits. These errors are
+ * expected as part of the BGX link up procedure
+ */
+ /* BIP_ERR counters clear as part of this read */
+ csr_rd_node(node,
+ CVMX_BGXX_SPUX_BR_BIP_ERR_CNT(index, xi.interface));
+ /* BER_CNT and ERR_BLKs clear as part of this read */
+ br_status2.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_BR_STATUS2(index, xi.interface));
+ }
+
+ /* (7) Enable packet transmit and receive */
+ spu_misc_control.u64 = csr_rd_node(
+ node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface));
+ spu_misc_control.s.rx_packet_dis = 0;
+ csr_wr_node(node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface),
+ spu_misc_control.u64);
+
+ if (debug)
+ debug("%s: Enabling tx and rx data packets\n", __func__);
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ cmr_config.s.data_pkt_tx_en = 1;
+ cmr_config.s.data_pkt_rx_en = 1;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+ return 0;
+}
+
+int __cvmx_helper_bgx_xaui_enable(int xiface)
+{
+ int index;
+ cvmx_helper_interface_mode_t mode;
+ int num_ports = cvmx_helper_ports_on_interface(xiface);
+
+ for (index = 0; index < num_ports; index++) {
+ int res;
+ int xipd_port = cvmx_helper_get_ipd_port(xiface, index);
+ int phy_pres;
+ struct cvmx_xiface xi =
+ cvmx_helper_xiface_to_node_interface(xiface);
+ static int count
+ [CVMX_MAX_NODES][CVMX_HELPER_MAX_IFACE]
+ [CVMX_HELPER_CFG_MAX_PORT_PER_IFACE] = {
+ [0 ... CVMX_MAX_NODES -
+ 1][0 ... CVMX_HELPER_MAX_IFACE -
+ 1] = { [0 ... CVMX_HELPER_CFG_MAX_PORT_PER_IFACE -
+ 1] = 0 }
+ };
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+
+ /* Set disparity for RXAUI interface as described in the
+ * Marvell RXAUI Interface specification.
+ */
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RXAUI &&
+ (cvmx_helper_get_port_phy_present(xiface, index)))
+ phy_pres = 1;
+ else
+ phy_pres = 0;
+ __cvmx_helper_bgx_port_init(xipd_port, phy_pres);
+
+retry_link:
+ res = __cvmx_helper_bgx_xaui_link_init(index, xiface);
+ /* RX Equalization or autonegotiation can take little longer
+ * retry the link maybe 5 times for now
+ */
+ if (res == -1 && count[xi.node][xi.interface][index] < 5) {
+ count[xi.node][xi.interface][index]++;
+#ifdef DEBUG_BGX
+ debug("%d:BGX(%d,%d): Failed to get link, retrying\n",
+ xi.node, xi.interface, index);
+#endif
+ goto retry_link;
+ }
+
+ if (res == -1) {
+#ifdef DEBUG_BGX
+ debug("%d:BGX(%d,%d): Failed to get link\n", xi.node,
+ xi.interface, index);
+#endif
+ continue;
+ }
+ }
+ return 0;
+}
+
+cvmx_helper_link_info_t __cvmx_helper_bgx_xaui_link_get(int xipd_port)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ struct cvmx_xport xp = cvmx_helper_ipd_port_to_xport(xipd_port);
+ int index = cvmx_helper_get_interface_index_num(xp.port);
+ cvmx_bgxx_spux_status1_t spu_status1;
+ cvmx_bgxx_smux_tx_ctl_t smu_tx_ctl;
+ cvmx_bgxx_smux_rx_ctl_t smu_rx_ctl;
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ cvmx_helper_link_info_t result;
+ cvmx_helper_interface_mode_t mode;
+ cvmx_bgxx_spux_misc_control_t spu_misc_control;
+ cvmx_bgxx_spux_br_status2_t br_status2;
+
+ result.u64 = 0;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RGMII)
+ return __cvmx_helper_bgx_sgmii_link_get(xipd_port);
+
+ /* Reading current rx/tx link status */
+ spu_status1.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_SPUX_STATUS1(index, xi.interface));
+ smu_tx_ctl.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_SMUX_TX_CTL(index, xi.interface));
+ smu_rx_ctl.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_SMUX_RX_CTL(index, xi.interface));
+ /* Reading tx/rx packet enables */
+ cmr_config.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ spu_misc_control.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface));
+
+ if (smu_tx_ctl.s.ls == 0 && smu_rx_ctl.s.status == 0 &&
+ cmr_config.s.data_pkt_tx_en == 1 &&
+ cmr_config.s.data_pkt_rx_en == 1 &&
+ spu_misc_control.s.rx_packet_dis == 0 &&
+ spu_status1.s.rcv_lnk) {
+ int lanes;
+ int qlm = cvmx_qlm_lmac(xiface, index);
+ u64 speed;
+
+ result.s.link_up = 1;
+ result.s.full_duplex = 1;
+ if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+ speed = cvmx_qlm_get_gbaud_mhz_node(xi.node, qlm);
+ else
+ speed = cvmx_qlm_get_gbaud_mhz(qlm);
+
+ cmr_config.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ switch (cmr_config.s.lmac_type) {
+ default:
+ case 1: // XAUI
+ speed = (speed * 8 + 5) / 10;
+ lanes = 4;
+ break;
+ case 2: // RXAUI
+ speed = (speed * 8 + 5) / 10;
+ lanes = 2;
+ break;
+ case 3: // XFI
+ speed = (speed * 64 + 33) / 66;
+ lanes = 1;
+ break;
+ case 4: // XLAUI
+ /* Adjust the speed when XLAUI is configured at 6.250Gbps */
+ if (speed == 6250)
+ speed = 6445;
+ speed = (speed * 64 + 33) / 66;
+ lanes = 4;
+ break;
+ }
+
+ if (debug)
+ debug("%s: baud: %llu, lanes: %d\n", __func__,
+ (unsigned long long)speed, lanes);
+ speed *= lanes;
+ result.s.speed = speed;
+ } else {
+ int res;
+ u64 err_blks = 0;
+ u64 ber_cnt = 0;
+
+ /* Check for err_blk and ber errors if 10G or 40G */
+ if ((mode == CVMX_HELPER_INTERFACE_MODE_XFI ||
+ mode == CVMX_HELPER_INTERFACE_MODE_XLAUI ||
+ mode == CVMX_HELPER_INTERFACE_MODE_10G_KR ||
+ mode == CVMX_HELPER_INTERFACE_MODE_40G_KR4)) {
+ br_status2.u64 = csr_rd_node(
+ xi.node,
+ CVMX_BGXX_SPUX_BR_STATUS2(index, xi.interface));
+ err_blks = br_status2.s.err_blks;
+ ber_cnt = br_status2.s.ber_cnt;
+ }
+
+ /* Checking if the link is up and error-free but we are receiving remote-faults */
+ if (smu_tx_ctl.s.ls != 1 && smu_rx_ctl.s.status != 1 &&
+ cmr_config.s.data_pkt_tx_en == 1 &&
+ cmr_config.s.data_pkt_rx_en == 1 &&
+ spu_misc_control.s.rx_packet_dis == 0 &&
+ err_blks == 0 && ber_cnt == 0 &&
+ spu_status1.s.rcv_lnk) {
+ result.s.init_success = 1;
+#ifdef DEBUG_BGX
+ debug("Receiving remote-fault ordered sets %d:BGX(%d,%d)\n",
+ xi.node, xi.interface, index);
+#endif
+
+ } else {
+ res = __cvmx_helper_bgx_xaui_link_init(index, xiface);
+ if (res == -1) {
+#ifdef DEBUG_BGX
+ debug("Failed to get %d:BGX(%d,%d) link\n",
+ xi.node, xi.interface, index);
+#endif
+ } else {
+#ifdef DEBUG_BGX
+ debug("Link initialization successful %d:BGX(%d,%d)\n",
+ xi.node, xi.interface, index);
+#endif
+ result.s.init_success = 1;
+ }
+ }
+ }
+
+ return result;
+}
+
+int __cvmx_helper_bgx_xaui_link_set(int xipd_port,
+ cvmx_helper_link_info_t link_info)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ struct cvmx_xport xp = cvmx_helper_ipd_port_to_xport(xipd_port);
+ int node = xi.node;
+ int index = cvmx_helper_get_interface_index_num(xp.port);
+ cvmx_bgxx_smux_tx_ctl_t smu_tx_ctl;
+ cvmx_bgxx_smux_rx_ctl_t smu_rx_ctl;
+ cvmx_bgxx_spux_status1_t spu_status1;
+ cvmx_helper_interface_mode_t mode;
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ cvmx_bgxx_spux_misc_control_t spu_misc_control;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RGMII)
+ return __cvmx_helper_bgx_sgmii_link_set(xipd_port, link_info);
+
+ /* Reading current rx/tx link status */
+ smu_tx_ctl.u64 =
+ csr_rd_node(node, CVMX_BGXX_SMUX_TX_CTL(index, xi.interface));
+ smu_rx_ctl.u64 =
+ csr_rd_node(node, CVMX_BGXX_SMUX_RX_CTL(index, xi.interface));
+ spu_status1.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_STATUS1(index, xi.interface));
+ /* Reading tx/rx packet enables */
+ cmr_config.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ spu_misc_control.u64 = csr_rd_node(
+ xi.node, CVMX_BGXX_SPUX_MISC_CONTROL(index, xi.interface));
+
+ /* If the link shouldn't be up, then just return */
+ if (!link_info.s.link_up)
+ return 0;
+
+ /* Do nothing if both RX and TX are happy and packet
+ * transmission/reception is enabled
+ */
+ if (smu_tx_ctl.s.ls == 0 && smu_rx_ctl.s.status == 0 &&
+ cmr_config.s.data_pkt_tx_en == 1 &&
+ cmr_config.s.data_pkt_rx_en == 1 &&
+ spu_misc_control.s.rx_packet_dis == 0 && spu_status1.s.rcv_lnk)
+ return 0;
+
+ /* Bring the link up */
+ return __cvmx_helper_bgx_xaui_link_init(index, xiface);
+}
+
+int __cvmx_helper_bgx_xaui_configure_loopback(int xipd_port,
+ int enable_internal,
+ int enable_external)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ struct cvmx_xport xp = cvmx_helper_ipd_port_to_xport(xipd_port);
+ int node = xi.node;
+ int index = cvmx_helper_get_interface_index_num(xp.port);
+ cvmx_bgxx_spux_control1_t spu_control1;
+ cvmx_bgxx_smux_ext_loopback_t smu_ext_loopback;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ /* INT_BEAT_GEN must be set for loopback if the QLMs are not clocked.
+ * Set it whenever we use internal loopback
+ */
+ if (enable_internal) {
+ cvmx_bgxx_cmrx_config_t cmr_config;
+
+ cmr_config.u64 = csr_rd_node(
+ node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ cmr_config.s.int_beat_gen = 1;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+ }
+ /* Set the internal loop */
+ spu_control1.u64 =
+ csr_rd_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface));
+ spu_control1.s.loopbck = enable_internal;
+ csr_wr_node(node, CVMX_BGXX_SPUX_CONTROL1(index, xi.interface),
+ spu_control1.u64);
+ /* Set the external loop */
+ smu_ext_loopback.u64 = csr_rd_node(
+ node, CVMX_BGXX_SMUX_EXT_LOOPBACK(index, xi.interface));
+ smu_ext_loopback.s.en = enable_external;
+ csr_wr_node(node, CVMX_BGXX_SMUX_EXT_LOOPBACK(index, xi.interface),
+ smu_ext_loopback.u64);
+
+ return __cvmx_helper_bgx_xaui_link_init(index, xiface);
+}
+
+int __cvmx_helper_bgx_mixed_enable(int xiface)
+{
+ int index;
+ int num_ports = cvmx_helper_ports_on_interface(xiface);
+ cvmx_helper_interface_mode_t mode;
+
+ for (index = 0; index < num_ports; index++) {
+ int xipd_port, phy_pres = 0;
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ continue;
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+
+ xipd_port = cvmx_helper_get_ipd_port(xiface, index);
+
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RXAUI &&
+ (cvmx_helper_get_port_phy_present(xiface, index)))
+ phy_pres = 1;
+
+ if (__cvmx_helper_bgx_port_init(xipd_port, phy_pres))
+ continue;
+
+ /* For RGMII interface, initialize the link after PKO is setup */
+ if (mode == CVMX_HELPER_INTERFACE_MODE_RGMII)
+ continue;
+ /* Call SGMII init code for lmac_type = 0|5 */
+ else if (mode == CVMX_HELPER_INTERFACE_MODE_SGMII) {
+ int do_link_set = 1;
+
+ if (do_link_set)
+ __cvmx_helper_bgx_sgmii_link_set(
+ xipd_port,
+ __cvmx_helper_bgx_sgmii_link_get(
+ xipd_port));
+ /* All other lmac type call XAUI init code */
+ } else {
+ int res;
+ struct cvmx_xiface xi =
+ cvmx_helper_xiface_to_node_interface(xiface);
+ static int count
+ [CVMX_MAX_NODES][CVMX_HELPER_MAX_IFACE]
+ [CVMX_HELPER_CFG_MAX_PORT_PER_IFACE] = {
+ [0 ... CVMX_MAX_NODES -
+ 1][0 ... CVMX_HELPER_MAX_IFACE -
+ 1] = { [0 ... CVMX_HELPER_CFG_MAX_PORT_PER_IFACE -
+ 1] = 0 }
+ };
+
+retry_link:
+ res = __cvmx_helper_bgx_xaui_link_init(index, xiface);
+ /* RX Equalization or autonegotiation can take little
+ * longer retry the link maybe 5 times for now
+ */
+ if (res == -1 &&
+ count[xi.node][xi.interface][index] < 5) {
+ count[xi.node][xi.interface][index]++;
+ goto retry_link;
+ }
+
+ if (res == -1) {
+#ifdef DEBUG_BGX
+ debug("Failed to get %d:BGX(%d,%d) link\n",
+ xi.node, xi.interface, index);
+#endif
+ continue;
+ }
+ }
+ }
+ return 0;
+}
+
+cvmx_helper_link_info_t __cvmx_helper_bgx_mixed_link_get(int xipd_port)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ int index = cvmx_helper_get_interface_index_num(xipd_port);
+ cvmx_helper_interface_mode_t mode;
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_SGMII ||
+ mode == CVMX_HELPER_INTERFACE_MODE_RGMII)
+ return __cvmx_helper_bgx_sgmii_link_get(xipd_port);
+ else
+ return __cvmx_helper_bgx_xaui_link_get(xipd_port);
+}
+
+int __cvmx_helper_bgx_mixed_link_set(int xipd_port,
+ cvmx_helper_link_info_t link_info)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ int index = cvmx_helper_get_interface_index_num(xipd_port);
+ cvmx_helper_interface_mode_t mode;
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_SGMII ||
+ mode == CVMX_HELPER_INTERFACE_MODE_RGMII)
+ return __cvmx_helper_bgx_sgmii_link_set(xipd_port, link_info);
+ else
+ return __cvmx_helper_bgx_xaui_link_set(xipd_port, link_info);
+}
+
+int __cvmx_helper_bgx_mixed_configure_loopback(int xipd_port,
+ int enable_internal,
+ int enable_external)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ int index = cvmx_helper_get_interface_index_num(xipd_port);
+ cvmx_helper_interface_mode_t mode;
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ if (mode == CVMX_HELPER_INTERFACE_MODE_SGMII ||
+ mode == CVMX_HELPER_INTERFACE_MODE_RGMII)
+ return __cvmx_helper_bgx_sgmii_configure_loopback(
+ xipd_port, enable_internal, enable_external);
+ else
+ return __cvmx_helper_bgx_xaui_configure_loopback(
+ xipd_port, enable_internal, enable_external);
+}
+
+/**
+ * @INTERNAL
+ * Configure Priority-Based Flow Control (a.k.a. PFC/CBFC)
+ * on a specific BGX interface/port.
+ */
+void __cvmx_helper_bgx_xaui_config_pfc(unsigned int node,
+ unsigned int interface,
+ unsigned int index, bool pfc_enable)
+{
+ int xiface = cvmx_helper_node_interface_to_xiface(node, interface);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ cvmx_bgxx_smux_cbfc_ctl_t cbfc_ctl;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ cbfc_ctl.u64 =
+ csr_rd_node(node, CVMX_BGXX_SMUX_CBFC_CTL(index, xi.interface));
+
+ /* Enable all PFC controls if requiested */
+ cbfc_ctl.s.rx_en = pfc_enable;
+ cbfc_ctl.s.tx_en = pfc_enable;
+ if (debug)
+ debug("%s: CVMX_BGXX_SMUX_CBFC_CTL(%d,%d)=%#llx\n", __func__,
+ index, xi.interface, (unsigned long long)cbfc_ctl.u64);
+ csr_wr_node(node, CVMX_BGXX_SMUX_CBFC_CTL(index, xi.interface),
+ cbfc_ctl.u64);
+}
+
+/**
+ * Function to control the generation of FCS, padding by the BGX
+ *
+ */
+void cvmx_helper_bgx_tx_options(unsigned int node, unsigned int interface,
+ unsigned int index, bool fcs_enable,
+ bool pad_enable)
+{
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ cvmx_bgxx_gmp_gmi_txx_append_t gmp_txx_append;
+ cvmx_bgxx_gmp_gmi_txx_min_pkt_t gmp_min_pkt;
+ cvmx_bgxx_smux_tx_min_pkt_t smu_min_pkt;
+ cvmx_bgxx_smux_tx_append_t smu_tx_append;
+ int xiface = cvmx_helper_node_interface_to_xiface(node, interface);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ return;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d, fcs: %s, pad: %s\n", __func__,
+ xi.node, xi.interface, index,
+ fcs_enable ? "true" : "false",
+ pad_enable ? "true" : "false");
+
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+
+ (void)cmr_config; /* In case we need LMAC_TYPE later */
+
+ /* Setting options for both BGX subsystems, regardless of LMAC type */
+
+ /* Set GMP (SGMII) Tx options */
+ gmp_min_pkt.u64 = 0;
+ /* per HRM Sec 34.3.4.4 */
+ gmp_min_pkt.s.min_size = 59;
+ csr_wr_node(node, CVMX_BGXX_GMP_GMI_TXX_MIN_PKT(index, xi.interface),
+ gmp_min_pkt.u64);
+ gmp_txx_append.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_GMI_TXX_APPEND(index, xi.interface));
+ gmp_txx_append.s.fcs = fcs_enable;
+ gmp_txx_append.s.pad = pad_enable;
+ csr_wr_node(node, CVMX_BGXX_GMP_GMI_TXX_APPEND(index, xi.interface),
+ gmp_txx_append.u64);
+
+ /* Set SMUX (XAUI/XFI) Tx options */
+ /* HRM Sec 33.3.4.3 should read 64 */
+ smu_min_pkt.u64 = 0;
+ smu_min_pkt.s.min_size = 0x40;
+ csr_wr_node(node, CVMX_BGXX_SMUX_TX_MIN_PKT(index, xi.interface),
+ smu_min_pkt.u64);
+ smu_tx_append.u64 = csr_rd_node(
+ node, CVMX_BGXX_SMUX_TX_APPEND(index, xi.interface));
+ smu_tx_append.s.fcs_d = fcs_enable; /* Set data-packet FCS */
+ smu_tx_append.s.pad = pad_enable;
+ csr_wr_node(node, CVMX_BGXX_SMUX_TX_APPEND(index, xi.interface),
+ smu_tx_append.u64);
+}
+
+/**
+ * Set mac for the ipd_port
+ *
+ * @param xipd_port ipd_port to set the mac
+ * @param bcst If set, accept all broadcast packets
+ * @param mcst Multicast mode
+ * 0 = Force reject all multicast packets
+ * 1 = Force accept all multicast packets
+ * 2 = use the address filter CAM.
+ * @param mac mac address for the ipd_port, or 0 to disable MAC filtering
+ */
+void cvmx_helper_bgx_set_mac(int xipd_port, int bcst, int mcst, u64 mac)
+{
+ int xiface = cvmx_helper_get_interface_num(xipd_port);
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ int node = xi.node;
+ int index;
+ cvmx_bgxx_cmr_rx_adrx_cam_t adr_cam;
+ cvmx_bgxx_cmrx_rx_adr_ctl_t adr_ctl;
+ cvmx_bgxx_cmrx_config_t cmr_config;
+ int saved_state_tx, saved_state_rx;
+
+ index = cvmx_helper_get_interface_index_num(xipd_port);
+
+ if (!cvmx_helper_is_port_valid(xiface, index))
+ return;
+
+ if (debug)
+ debug("%s: interface %u:%d/%d\n", __func__, xi.node,
+ xi.interface, index);
+
+ cmr_config.u64 =
+ csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
+ saved_state_tx = cmr_config.s.data_pkt_tx_en;
+ saved_state_rx = cmr_config.s.data_pkt_rx_en;
+ cmr_config.s.data_pkt_tx_en = 0;
+ cmr_config.s.data_pkt_rx_en = 0;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+
+ /* Set the mac */
+ adr_cam.u64 = 0;
+ adr_cam.s.id = index;
+
+ if (mac != 0ull)
+ adr_cam.s.en = 1;
+ adr_cam.s.adr = mac;
+
+ csr_wr_node(node, CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface),
+ adr_cam.u64);
+
+ adr_ctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_CMRX_RX_ADR_CTL(index, xi.interface));
+ if (mac != 0ull)
+ adr_ctl.s.cam_accept =
+ 1; /* Accept the packet on DMAC CAM address */
+ else
+ adr_ctl.s.cam_accept = 0; /* No filtering, promiscuous */
+
+ adr_ctl.s.mcst_mode = mcst; /* Use the address filter CAM */
+ adr_ctl.s.bcst_accept = bcst; /* Accept all broadcast packets */
+ csr_wr_node(node, CVMX_BGXX_CMRX_RX_ADR_CTL(index, xi.interface),
+ adr_ctl.u64);
+ /* Set SMAC for PAUSE frames */
+ csr_wr_node(node, CVMX_BGXX_GMP_GMI_SMACX(index, xi.interface), mac);
+
+ /* Restore back the interface state */
+ cmr_config.s.data_pkt_tx_en = saved_state_tx;
+ cmr_config.s.data_pkt_rx_en = saved_state_rx;
+ csr_wr_node(node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
+ cmr_config.u64);
+
+ /* Wait 100ms after bringing up the link to give the PHY some time */
+ if (cmr_config.s.enable) {
+ cvmx_helper_interface_mode_t mode;
+
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ __cvmx_helper_bgx_interface_enable_delay(mode);
+ }
+}
+
+/**
+ * Disables the sending of flow control (pause) frames on the specified
+ * BGX port(s).
+ *
+ * @param xiface Which xiface
+ * @param port_mask Mask (4bits) of which ports on the interface to disable
+ * backpressure on.
+ * 1 => disable backpressure
+ * 0 => enable backpressure
+ *
+ * @return 0 on success
+ * -1 on error
+ *
+ * FIXME: Should change the API to handle a single port in every
+ * invocation, for consistency with other API calls.
+ */
+int cvmx_bgx_set_backpressure_override(int xiface, unsigned int port_mask)
+{
+ struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
+ cvmx_bgxx_cmr_rx_ovr_bp_t rx_ovr_bp;
+ int node = xi.node;
+
+ if (xi.interface >= CVMX_HELPER_MAX_GMX)
+ return 0;
+
+ if (debug)
+ debug("%s: interface %u:%d port_mask=%#x\n", __func__, xi.node,
+ xi.interface, port_mask);
+
+ /* Check for valid arguments */
+ rx_ovr_bp.u64 = 0;
+ rx_ovr_bp.s.en = port_mask; /* Per port Enable back pressure override */
+ rx_ovr_bp.s.ign_fifo_bp =
+ port_mask; /* Ignore the RX FIFO full when computing BP */
+
+ csr_wr_node(node, CVMX_BGXX_CMR_RX_OVR_BP(xi.interface), rx_ovr_bp.u64);
+ return 0;
+}
+
+int cvmx_bgx_set_flowctl_mode(int xipd_port, cvmx_qos_proto_t qos,
+ cvmx_qos_pkt_mode_t fc_mode)
+{
+ int node, xiface, iface, index, mode;
+ struct cvmx_xiface xi;
+ const struct {
+ int bck;
+ int drp;
+ } fcmode[4] = { [CVMX_QOS_PKT_MODE_HWONLY] = { 1, 1 },
+ [CVMX_QOS_PKT_MODE_SWONLY] = { 0, 0 },
+ [CVMX_QOS_PKT_MODE_HWSW] = { 1, 0 },
+ [CVMX_QOS_PKT_MODE_DROP] = { 0, 1 } };
+
+ xiface = cvmx_helper_get_interface_num(xipd_port);
+ xi = cvmx_helper_xiface_to_node_interface(xiface);
+ node = xi.node;
+ iface = xi.interface;
+
+ if (xi.interface >= CVMX_HELPER_MAX_GMX)
+ return 0;
+
+ index = cvmx_helper_get_interface_index_num(xipd_port);
+ mode = cvmx_helper_bgx_get_mode(xiface, index);
+ switch (mode) {
+ case CVMX_HELPER_INTERFACE_MODE_10G_KR:
+ case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
+ case CVMX_HELPER_INTERFACE_MODE_XLAUI:
+ case CVMX_HELPER_INTERFACE_MODE_XFI:
+ case CVMX_HELPER_INTERFACE_MODE_RXAUI:
+ case CVMX_HELPER_INTERFACE_MODE_XAUI: {
+ cvmx_bgxx_smux_tx_ctl_t txctl;
+ cvmx_bgxx_smux_cbfc_ctl_t cbfc;
+ cvmx_bgxx_smux_rx_frm_ctl_t frmctl;
+ cvmx_bgxx_smux_hg2_control_t hg2ctl;
+
+ txctl.u64 =
+ csr_rd_node(node, CVMX_BGXX_SMUX_TX_CTL(index, iface));
+ cbfc.u64 = csr_rd_node(node,
+ CVMX_BGXX_SMUX_CBFC_CTL(index, iface));
+ frmctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_SMUX_RX_FRM_CTL(index, iface));
+ hg2ctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_SMUX_HG2_CONTROL(index, iface));
+ switch (qos) {
+ case CVMX_QOS_PROTO_PAUSE:
+ cbfc.u64 = 0;
+ hg2ctl.u64 = 0;
+ frmctl.s.ctl_bck = fcmode[fc_mode].bck;
+ frmctl.s.ctl_drp = fcmode[fc_mode].drp;
+ frmctl.s.ctl_mcst = 1;
+ txctl.s.l2p_bp_conv = 1;
+ break;
+ case CVMX_QOS_PROTO_PFC:
+ hg2ctl.u64 = 0;
+ hg2ctl.s.logl_en = 0xff;
+ frmctl.s.ctl_bck = fcmode[fc_mode].bck;
+ frmctl.s.ctl_drp = fcmode[fc_mode].drp;
+ frmctl.s.ctl_mcst = 1;
+ cbfc.s.bck_en = fcmode[fc_mode].bck;
+ cbfc.s.drp_en = fcmode[fc_mode].drp;
+ cbfc.s.phys_en = 0;
+ cbfc.s.logl_en = 0xff;
+ cbfc.s.tx_en = 1;
+ cbfc.s.rx_en = 1;
+ break;
+ case CVMX_QOS_PROTO_NONE:
+ cbfc.u64 = 0;
+ hg2ctl.u64 = 0;
+ frmctl.s.ctl_bck = fcmode[CVMX_QOS_PKT_MODE_DROP].bck;
+ frmctl.s.ctl_drp = fcmode[CVMX_QOS_PKT_MODE_DROP].drp;
+ txctl.s.l2p_bp_conv = 0;
+ break;
+ default:
+ break;
+ }
+ csr_wr_node(node, CVMX_BGXX_SMUX_CBFC_CTL(index, iface),
+ cbfc.u64);
+ csr_wr_node(node, CVMX_BGXX_SMUX_RX_FRM_CTL(index, iface),
+ frmctl.u64);
+ csr_wr_node(node, CVMX_BGXX_SMUX_HG2_CONTROL(index, iface),
+ hg2ctl.u64);
+ csr_wr_node(node, CVMX_BGXX_SMUX_TX_CTL(index, iface),
+ txctl.u64);
+ break;
+ }
+ case CVMX_HELPER_INTERFACE_MODE_SGMII:
+ case CVMX_HELPER_INTERFACE_MODE_RGMII: {
+ cvmx_bgxx_gmp_gmi_rxx_frm_ctl_t gmi_frmctl;
+
+ gmi_frmctl.u64 = csr_rd_node(
+ node, CVMX_BGXX_GMP_GMI_RXX_FRM_CTL(index, iface));
+ switch (qos) {
+ case CVMX_QOS_PROTO_PAUSE:
+ gmi_frmctl.s.ctl_bck = fcmode[fc_mode].bck;
+ gmi_frmctl.s.ctl_drp = fcmode[fc_mode].drp;
+ gmi_frmctl.s.ctl_mcst = 1;
+ break;
+ case CVMX_QOS_PROTO_NONE:
+ gmi_frmctl.s.ctl_bck =
+ fcmode[CVMX_QOS_PKT_MODE_DROP].bck;
+ gmi_frmctl.s.ctl_drp =
+ fcmode[CVMX_QOS_PKT_MODE_DROP].drp;
+ break;
+ default:
+ break;
+ }
+ csr_wr_node(node, CVMX_BGXX_GMP_GMI_RXX_FRM_CTL(index, iface),
+ gmi_frmctl.u64);
+ }
+ } /*switch*/
+
+ return 0;
+}
--
2.35.1
More information about the U-Boot
mailing list