[PATCH] usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver

[Sean Anderson]

Hi Angus,

On 4/22/22 1:47 PM, Angus Ainslie wrote:
> Suppress warnings when building the SPL without USB_DWC3_GENERIC
> 
> Signed-off-by: Angus Ainslie <angus at akkea.ca>
> ---
>  drivers/usb/dwc3/Kconfig  | 7 +++++++
>  drivers/usb/dwc3/Makefile | 2 +-
>  2 files changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 62aa65bf0c..93dffeb1f9 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -30,6 +30,13 @@ config USB_DWC3_GENERIC
>  	  Select this for Xilinx ZynqMP and similar Platforms.
>  	  This wrapper supports Host and Peripheral operation modes.
>  
> +config SPL_USB_DWC3_GENERIC
> +	bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue) for the SPL"
> +	depends on DM_USB && USB_DWC3 && MISC

Shouldn't this be SPL_DM_USB && USB_DWC3 && SPL_MISC?

--Sean

> +	help
> +	  Select this for Xilinx ZynqMP and similar Platforms.
> +	  This wrapper supports Host and Peripheral operation modes.
> +
>  config USB_DWC3_MESON_G12A
>  	bool "Amlogic Meson G12A USB wrapper"
>  	depends on DM_USB && USB_DWC3 && ARCH_MESON
> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
> index 0dd1ba87cd..97b4f7191c 100644
> --- a/drivers/usb/dwc3/Makefile
> +++ b/drivers/usb/dwc3/Makefile
> @@ -9,7 +9,7 @@ obj-$(CONFIG_USB_DWC3_GADGET)		+= gadget.o ep0.o
>  obj-$(CONFIG_USB_DWC3_OMAP)		+= dwc3-omap.o
>  obj-$(CONFIG_USB_DWC3_MESON_G12A)	+= dwc3-meson-g12a.o
>  obj-$(CONFIG_USB_DWC3_MESON_GXL)	+= dwc3-meson-gxl.o
> -obj-$(CONFIG_USB_DWC3_GENERIC)		+= dwc3-generic.o
> +obj-$(CONFIG_$(SPL_)USB_DWC3_GENERIC)		+= dwc3-generic.o
>  obj-$(CONFIG_USB_DWC3_UNIPHIER)		+= dwc3-uniphier.o
>  obj-$(CONFIG_USB_DWC3_LAYERSCAPE)	+= dwc3-layerscape.o
>  obj-$(CONFIG_USB_DWC3_PHY_OMAP)		+= ti_usb_phy.o
>