[PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry

[sbabic at denx.de]

> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Fix NAND BCH geometry as otherwise the following errors are observed
> upon boot:
> ...
> Loading Environment from NAND... NAND read from offset 380000 failed -74
> ...
> NAND read from offset 800 failed -74
> ...
> ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes
>  from PEB 0:0, read 64 bytes
> ...
> Fixes: ed48490f8d3f
> ("mtd: gpmi: fix the bch setting backward compatible issue")
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================