[PATCH V2 10/12] configs: drop CONFIG_MMCROOT
Stefano Babic
sbabic at denx.de
Thu Apr 21 15:16:44 CEST 2022
On 15.04.22 06:23, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> CONFIG_MMCROOT is only used to set mmcroot, no need a dedicated macro.
>
> Script as below
> "
> for i in `ls include/configs/*.h`
> do
> mmcroot=`sed -n '/define.*MMCROOT/ p' $i | awk -F\" '{ print $2;}'`
>
> if [ ! -n "$mmcroot" ]; then
> continue
> fi
>
> sed -i '/define.*MMCROOT/ d' $i
> sed -i 's,\" CONFIG_MMCROOT \",'$mmcroot',g' $i
>
> done
> "
...but if this is generated by a script....
>
> Reviewed-by: Fabio Estevam <festevam at denx.de>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> include/configs/aristainetos2.h | 3 +--
> include/configs/capricorn-common.h | 1 -
> include/configs/cgtqmx8.h | 3 +--
> include/configs/cl-som-imx7.h | 1 -
> include/configs/imx7-cm.h | 3 +--
> include/configs/imx8mm-cl-iot-gate.h | 3 +--
> include/configs/imx8mm_evk.h | 3 +--
> include/configs/imx8mn_evk.h | 3 +--
> include/configs/imx8mp_evk.h | 3 +--
> include/configs/imx8mp_rsb3720.h | 3 +--
> include/configs/imx8mq_cm.h | 3 +--
> include/configs/imx8mq_evk.h | 3 +--
> include/configs/imx8mq_phanbell.h | 3 +--
> include/configs/imx8qm_mek.h | 3 +--
> include/configs/imx8qm_rom7720.h | 3 +--
> include/configs/imx8qxp_mek.h | 3 +--
> include/configs/imx8ulp_evk.h | 3 +--
> include/configs/liteboard.h | 3 +--
> include/configs/mx6sllevk.h | 3 +--
> include/configs/mx6ul_14x14_evk.h | 3 +--
> include/configs/mx6ullevk.h | 3 +--
> include/configs/mx7ulp_com.h | 13 +++++++++++--
> include/configs/mx7ulp_evk.h | 3 +--
> include/configs/phycore_imx8mm.h | 1 -
> include/configs/phycore_imx8mp.h | 1 -
> include/configs/pico-imx8mq.h | 3 +--
> include/configs/xpress.h | 3 +--
> 27 files changed, 33 insertions(+), 50 deletions(-)
>
> diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h
> index 611b6d724e1..0dcd4cae2fa 100644
> --- a/include/configs/aristainetos2.h
> +++ b/include/configs/aristainetos2.h
> @@ -26,7 +26,6 @@
>
> #include "mx6_common.h"
>
> -#define CONFIG_MMCROOT "/dev/mmcblk0p1"
>
> /* MMC Configs */
> #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
> @@ -183,7 +182,7 @@
> "${pubkey}\0" \
> "mainRargs=setenv bootargs console=${console},${baudrate} " \
> "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> "mmcRargs=setenv bootargs console=${console},${baudrate} " \
> diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
> index 58d7a3a8ce2..08534cd1a30 100644
> --- a/include/configs/capricorn-common.h
> +++ b/include/configs/capricorn-common.h
> @@ -109,7 +109,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR 0x80200000
>
> /* On CCP board, USDHC1 is for eMMC */
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* eMMC */
>
> #define CONFIG_SYS_SDRAM_BASE 0x80000000
> #define PHYS_SDRAM_1 0x80000000
> diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h
> index bd5c072382a..4b4694ec071 100644
> --- a/include/configs/cgtqmx8.h
> +++ b/include/configs/cgtqmx8.h
> @@ -78,7 +78,7 @@
> "fdt_file=imx8qm-cgt-qmx8.dtb\0" \
> "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \
> "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> @@ -122,7 +122,6 @@
>
> #define CONFIG_SYS_INIT_SP_ADDR 0x80200000
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
> #define CONFIG_SYS_FSL_USDHC_NUM 3
>
> #define CONFIG_SYS_SDRAM_BASE 0x80000000
> diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
> index 8af80f58f8e..4b494d8aeef 100644
> --- a/include/configs/cl-som-imx7.h
> +++ b/include/configs/cl-som-imx7.h
> @@ -104,7 +104,6 @@
> #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
>
> #define CONFIG_SYS_FSL_USDHC_NUM 2
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
> #endif
>
> /* USB Configs */
> diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h
> index 46ca1c58145..2d9f8bb510b 100644
> --- a/include/configs/imx7-cm.h
> +++ b/include/configs/imx7-cm.h
> @@ -31,7 +31,7 @@
> "fdt_addr=0x83000000\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> @@ -83,7 +83,6 @@
> #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
> #define CONFIG_SYS_FSL_USDHC_NUM 2
>
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
>
> /* USB Configs */
> #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
> diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
> index 14d3f3cac65..05fe2444f53 100644
> --- a/include/configs/imx8mm-cl-iot-gate.h
> +++ b/include/configs/imx8mm-cl-iot-gate.h
> @@ -79,7 +79,7 @@
> "bootm_size=0x10000000\0" \
> "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
> "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> @@ -131,7 +131,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> #define PHYS_SDRAM 0x40000000
> diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
> index f4b6353ea85..42b78485cfc 100644
> --- a/include/configs/imx8mm_evk.h
> +++ b/include/configs/imx8mm_evk.h
> @@ -52,7 +52,7 @@
> "initrd_addr=0x43800000\0" \
> "bootm_size=0x10000000\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
>
> /* Link Definitions */
>
> @@ -63,7 +63,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> #define PHYS_SDRAM 0x40000000
> diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
> index f969314d6b2..86b75ab4625 100644
> --- a/include/configs/imx8mn_evk.h
> +++ b/include/configs/imx8mn_evk.h
> @@ -51,7 +51,7 @@
> "initrd_addr=0x43800000\0" \
> "bootm_size=0x10000000\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
>
> /* Link Definitions */
>
> @@ -62,7 +62,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> #define PHYS_SDRAM 0x40000000
> diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
> index 35fc27bb370..cc8d65cb54e 100644
> --- a/include/configs/imx8mp_evk.h
> +++ b/include/configs/imx8mp_evk.h
> @@ -61,7 +61,7 @@
> "initrd_addr=0x43800000\0" \
> "bootm_size=0x10000000\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
>
> /* Link Definitions */
>
> @@ -72,7 +72,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> /* Totally 6GB DDR */
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h
> index 62e06d23034..b80a5f91525 100644
> --- a/include/configs/imx8mp_rsb3720.h
> +++ b/include/configs/imx8mp_rsb3720.h
> @@ -95,7 +95,7 @@
> "bootm_size=0x10000000\0" \
> "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
> "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> @@ -146,7 +146,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> /* Totally 6GB or 4G DDR */
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
> index a3bb3c9d291..989486aa6dc 100644
> --- a/include/configs/imx8mq_cm.h
> +++ b/include/configs/imx8mq_cm.h
> @@ -55,7 +55,7 @@
> "initrd_addr=0x43800000\0" \
> "bootm_size=0x10000000\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
>
> /* Link Definitions */
>
> @@ -66,7 +66,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> #define PHYS_SDRAM 0x40000000
> diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
> index 94886fa268c..f7929e5867e 100644
> --- a/include/configs/imx8mq_evk.h
> +++ b/include/configs/imx8mq_evk.h
> @@ -62,7 +62,7 @@
> "initrd_addr=0x43800000\0" \
> "bootm_size=0x10000000\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
>
> /* Link Definitions */
>
> @@ -73,7 +73,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> #define PHYS_SDRAM 0x40000000
> diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
> index ef5992d7c39..f6410114b76 100644
> --- a/include/configs/imx8mq_phanbell.h
> +++ b/include/configs/imx8mq_phanbell.h
> @@ -52,7 +52,7 @@
> "initrd_high=0xffffffffffffffff\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
> "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> @@ -101,7 +101,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> #define PHYS_SDRAM 0x40000000
> diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
> index 8a269225778..9452ba56152 100644
> --- a/include/configs/imx8qm_mek.h
> +++ b/include/configs/imx8qm_mek.h
> @@ -50,7 +50,7 @@
> "initrd_high=0xffffffffffffffff\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
> "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> @@ -117,7 +117,6 @@
> /* Default environment is in SD */
>
> /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x80000000
> #define PHYS_SDRAM_1 0x80000000
> diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h
> index 7532c6e7551..04a2216fcd8 100644
> --- a/include/configs/imx8qm_rom7720.h
> +++ b/include/configs/imx8qm_rom7720.h
> @@ -66,7 +66,7 @@
> "initrd_addr=0x83800000\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \
> "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> @@ -114,7 +114,6 @@
> * USDHC3 is for SD on base board On DDR4 board, USDHC1 is mux for NAND,
> * USDHC2 is for SD, USDHC3 is for SD on base board
> */
> -#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USDHC3 */
> #define CONFIG_SYS_FSL_USDHC_NUM 3
>
> #define CONFIG_SYS_SDRAM_BASE 0x80000000
> diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
> index 01577932884..c290c19c347 100644
> --- a/include/configs/imx8qxp_mek.h
> +++ b/include/configs/imx8qxp_mek.h
> @@ -48,7 +48,7 @@
> "initrd_high=0xffffffffffffffff\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \
> "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> @@ -115,7 +115,6 @@
> /* Default environment is in SD */
>
> /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x80000000
> #define PHYS_SDRAM_1 0x80000000
> diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h
> index f078c37c2de..46cba330b23 100644
> --- a/include/configs/imx8ulp_evk.h
> +++ b/include/configs/imx8ulp_evk.h
> @@ -58,7 +58,7 @@
> "initrd_addr=0x83800000\0" \
> "bootm_size=0x10000000\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk2p2 rootwait rw\0" \
>
> /* Link Definitions */
>
> @@ -67,7 +67,6 @@
> #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk2p2"
>
> #define CONFIG_SYS_SDRAM_BASE 0x80000000
> #define PHYS_SDRAM 0x80000000
> diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h
> index d0960bcaf9a..e8fd4e7a8e8 100644
> --- a/include/configs/liteboard.h
> +++ b/include/configs/liteboard.h
> @@ -35,7 +35,7 @@
> "ip_dyn=yes\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> @@ -100,7 +100,6 @@
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> /* FLASH and environment organization */
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2"
>
> /* USB Configs */
> #ifdef CONFIG_CMD_USB
> diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h
> index 0793028ba1f..1b32f58afca 100644
> --- a/include/configs/mx6sllevk.h
> +++ b/include/configs/mx6sllevk.h
> @@ -25,7 +25,7 @@
> "ip_dyn=yes\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> @@ -92,7 +92,6 @@
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> /* Environment organization */
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
>
> /* MMC Configs */
> #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
> diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
> index 17e7ae0b4cc..72554d18b0a 100644
> --- a/include/configs/mx6ul_14x14_evk.h
> +++ b/include/configs/mx6ul_14x14_evk.h
> @@ -47,7 +47,7 @@
> "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> @@ -121,7 +121,6 @@
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> /* environment organization */
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> /* USB Configs */
> #ifdef CONFIG_CMD_USB
> diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
> index dfcdc00c061..bc494b46b69 100644
> --- a/include/configs/mx6ullevk.h
> +++ b/include/configs/mx6ullevk.h
> @@ -43,7 +43,7 @@
> "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> @@ -118,7 +118,6 @@
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> /* environment organization */
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_IOMUX_LPSR
>
> diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h
> index ce6afcde2a0..c790374d1a5 100644
> --- a/include/configs/mx7ulp_com.h
> +++ b/include/configs/mx7ulp_com.h
> @@ -17,7 +17,16 @@
>
> #define CONFIG_SYS_BOOTM_LEN 0x1000000
>
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2"
> +/*
> + * Detect overlap between U-Boot image and environment area in build-time
> + *
> + * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot-dtb.imx offset
> + * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
> + *
> + * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
> + * write the direct value here
> + */
> +#define CONFIG_BOARD_SIZE_LIMIT 785408
>
..how is it possible that CONFIG_BOARD_SIZE_LIMIT is added ?
This does not belong to the series, and it should not be here but in
configs/
Best regards,
Stefano
> /* Using ULP WDOG for reset */
> #define WDOG_BASE_ADDR WDG1_RBASE
> @@ -41,7 +50,7 @@
> "fdt_addr=0x63000000\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
> index e80d748d991..7644274d84b 100644
> --- a/include/configs/mx7ulp_evk.h
> +++ b/include/configs/mx7ulp_evk.h
> @@ -13,7 +13,6 @@
>
> #define CONFIG_SYS_BOOTM_LEN 0x1000000
>
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
>
> /* Using ULP WDOG for reset */
> #define WDOG_BASE_ADDR WDG1_RBASE
> @@ -47,7 +46,7 @@
> "ip_dyn=yes\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
> diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
> index 528cda0dbe3..71f0c42ec0c 100644
> --- a/include/configs/phycore_imx8mm.h
> +++ b/include/configs/phycore_imx8mm.h
> @@ -77,7 +77,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USDHC3 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
>
> diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
> index db530965a2a..0c963b62b3b 100644
> --- a/include/configs/phycore_imx8mp.h
> +++ b/include/configs/phycore_imx8mp.h
> @@ -77,7 +77,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk2p2" /* USDHC3 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
>
> diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
> index 495fddf248d..95845276e7b 100644
> --- a/include/configs/pico-imx8mq.h
> +++ b/include/configs/pico-imx8mq.h
> @@ -46,7 +46,7 @@
> "initrd_high=0xffffffffffffffff\0" \
> "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
> "loadbootscript=" \
> @@ -80,7 +80,6 @@
> #define CONFIG_SYS_INIT_SP_ADDR \
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
>
> #define CONFIG_SYS_SDRAM_BASE 0x40000000
> #define PHYS_SDRAM 0x40000000
> diff --git a/include/configs/xpress.h b/include/configs/xpress.h
> index 13cfa2cd4bd..43b67a355b1 100644
> --- a/include/configs/xpress.h
> +++ b/include/configs/xpress.h
> @@ -34,7 +34,6 @@
> (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
> /* Environment is in stored in the eMMC boot partition */
> -#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */
>
> /* USB Configs */
> #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> @@ -61,7 +60,7 @@
> "ip_dyn=yes\0" \
> "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> "mmcpart=1\0" \
> - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> "mmcautodetect=yes\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> "root=${mmcroot}\0" \
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list