[PATCH 09/12] ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1
Samuel Holland
samuel at sholland.org
Wed Apr 27 22:31:28 CEST 2022
Copy the devicetree source for the V3(s)/S3 SoCs and all existing boards
verbatim from the Linux v5.18-rc1 tag.
This commit also adds the following new board devicetrees:
- sun8i-s3-elimo-initium.dts
- sun8i-v3-sl631-imx179.dts
This update should not impact any existing U-Boot functionality.
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
arch/arm/dts/Makefile | 2 +
arch/arm/dts/sun8i-s3-elimo-impetus.dtsi | 44 ++++++
arch/arm/dts/sun8i-s3-elimo-initium.dts | 29 ++++
arch/arm/dts/sun8i-s3-pinecube.dts | 13 +-
arch/arm/dts/sun8i-v3-sl631-imx179.dts | 12 ++
arch/arm/dts/sun8i-v3-sl631.dtsi | 138 ++++++++++++++++++
arch/arm/dts/sun8i-v3.dtsi | 36 +++++
arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts | 17 ++-
arch/arm/dts/sun8i-v3s.dtsi | 93 ++++++++++--
9 files changed, 358 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
create mode 100644 arch/arm/dts/sun8i-s3-elimo-initium.dts
create mode 100644 arch/arm/dts/sun8i-v3-sl631-imx179.dts
create mode 100644 arch/arm/dts/sun8i-v3-sl631.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index bbd69d3a67..059ac7fad8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -670,7 +670,9 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v40-bananapi-m2-berry.dtb
dtb-$(CONFIG_MACH_SUN8I_V3S) += \
+ sun8i-s3-elimo-initium.dtb \
sun8i-s3-pinecube.dtb \
+ sun8i-v3-sl631-imx179.dtb \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-bananapi-m2-plus.dtb \
diff --git a/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
new file mode 100644
index 0000000000..052b010a56
--- /dev/null
+++ b/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo at elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Elimo Impetus SoM";
+ compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ broken-cd;
+ bus-width = <4>;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-s3-elimo-initium.dts b/arch/arm/dts/sun8i-s3-elimo-initium.dts
new file mode 100644
index 0000000000..039677c2cc
--- /dev/null
+++ b/arch/arm/dts/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo at elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+ model = "Elimo Initium";
+ compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+ "allwinner,sun8i-v3";
+
+ aliases {
+ serial1 = &uart1;
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pg_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&emac {
+ phy-handle = <&int_mii_phy>;
+ phy-mode = "mii";
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-s3-pinecube.dts b/arch/arm/dts/sun8i-s3-pinecube.dts
index 9bab6b7f40..20966e954e 100644
--- a/arch/arm/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/dts/sun8i-s3-pinecube.dts
@@ -10,7 +10,7 @@
/ {
model = "PineCube IP Camera";
- compatible = "pine64,pinecube", "allwinner,sun8i-s3";
+ compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
aliases {
serial0 = &uart2;
@@ -64,9 +64,6 @@
status = "okay";
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
csi1_ep: endpoint {
remote-endpoint = <&ov5640_ep>;
bus-width = <8>;
@@ -88,13 +85,9 @@
status = "okay";
axp209: pmic at 34 {
- compatible = "x-powers,axp203",
- "x-powers,axp209";
reg = <0x34>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <1>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/dts/sun8i-v3-sl631-imx179.dts
new file mode 100644
index 0000000000..117aeece4e
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3-sl631-imx179.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact at paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+ model = "SL631 Action Camera with IMX179";
+ compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+ "allwinner,sun8i-v3";
+};
diff --git a/arch/arm/dts/sun8i-v3-sl631.dtsi b/arch/arm/dts/sun8i-v3-sl631.dtsi
new file mode 100644
index 0000000000..6f93f8c49f
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3-sl631.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact at paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "SL631 Action Camera";
+ compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic at 34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pb_pins>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button-174 {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ channel = <0>;
+ voltage = <174603>;
+ };
+
+ button-384 {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ channel = <0>;
+ voltage = <384126>;
+ };
+
+ button-593 {
+ label = "OK";
+ linux,code = <KEY_OK>;
+ channel = <0>;
+ voltage = <593650>;
+ };
+};
+
+&mmc0 {
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ vmmc-supply = <®_dcdc3>;
+ status = "okay";
+};
+
+&pio {
+ vcc-pd-supply = <®_dcdc3>;
+ vcc-pe-supply = <®_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-sys-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vdd-3v3";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash at 0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pg_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-v3.dtsi b/arch/arm/dts/sun8i-v3.dtsi
index ca4672ed2e..186c30cbe6 100644
--- a/arch/arm/dts/sun8i-v3.dtsi
+++ b/arch/arm/dts/sun8i-v3.dtsi
@@ -1,14 +1,40 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019 Icenowy Zheng <icenowy at aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm at manjaro.org>
*/
#include "sun8i-v3s.dtsi"
+/ {
+ soc {
+ i2s0: i2s at 1c22000 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-v3-i2s",
+ "allwinner,sun8i-h3-i2s";
+ reg = <0x01c22000 0x400>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+ clock-names = "apb", "mod";
+ dmas = <&dma 3>, <&dma 3>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins>;
+ resets = <&ccu RST_BUS_I2S0>;
+ status = "disabled";
+ };
+ };
+};
+
&ccu {
compatible = "allwinner,sun8i-v3-ccu";
};
+&codec_analog {
+ compatible = "allwinner,sun8i-v3-codec-analog",
+ "allwinner,sun8i-h3-codec-analog";
+};
+
&emac {
/delete-property/ phy-handle;
/delete-property/ phy-mode;
@@ -24,4 +50,14 @@
&pio {
compatible = "allwinner,sun8i-v3-pinctrl";
+
+ i2s0_pins: i2s0-pins {
+ pins = "PG10", "PG11", "PG12", "PG13";
+ function = "i2s";
+ };
+
+ uart1_pg_pins: uart1-pg-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
};
diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
index db5cd0b857..752ad05c8f 100644
--- a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -49,16 +49,18 @@
compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
"allwinner,sun8i-v3s";
+ aliases {
+ ethernet0 = &emac;
+ };
+
leds {
/* The LEDs use PG0~2 pins, which conflict with MMC1 */
status = "disabled";
};
};
-&mmc1 {
- broken-cd;
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
+&emac {
+ allwinner,leds-active-low;
status = "okay";
};
@@ -94,3 +96,10 @@
voltage = <800000>;
};
};
+
+&mmc1 {
+ broken-cd;
+ bus-width = <4>;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi
index 0c73416769..084323d5c6 100644
--- a/arch/arm/dts/sun8i-v3s.dtsi
+++ b/arch/arm/dts/sun8i-v3s.dtsi
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2016 Icenowy Zheng <icenowy at aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm at manjaro.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -157,12 +158,30 @@
syscon: system-control at 1c00000 {
compatible = "allwinner,sun8i-v3s-system-control",
"allwinner,sun8i-h3-system-control";
- reg = <0x01c00000 0x1000>;
+ reg = <0x01c00000 0xd0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
};
+ nmi_intc: interrupt-controller at 1c000d0 {
+ compatible = "allwinner,sun8i-v3s-nmi",
+ "allwinner,sun9i-a80-nmi";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x01c000d0 0x0c>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma: dma-controller at 1c02000 {
+ compatible = "allwinner,sun8i-v3s-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
tcon0: lcd-controller at 1c0c000 {
compatible = "allwinner,sun8i-v3s-tcon";
reg = <0x01c0c000 0x1000>;
@@ -266,6 +285,8 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
clock-names = "ahb", "mod";
+ dmas = <&dma 16>, <&dma 16>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_CE>;
reset-names = "ahb";
};
@@ -328,6 +349,12 @@
interrupt-controller;
#interrupt-cells = <3>;
+ /omit-if-no-ref/
+ csi0_mclk_pin: csi0-mclk-pin {
+ pins = "PE20";
+ function = "csi_mipi";
+ };
+
/omit-if-no-ref/
csi1_8bit_pins: csi1-8bit-pins {
pins = "PE0", "PE2", "PE3", "PE8", "PE9",
@@ -347,6 +374,12 @@
function = "i2c0";
};
+ /omit-if-no-ref/
+ i2c1_pb_pins: i2c1-pb-pins {
+ pins = "PB8", "PB9";
+ function = "i2c1";
+ };
+
/omit-if-no-ref/
i2c1_pe_pins: i2c1-pe-pins {
pins = "PE21", "PE22";
@@ -401,6 +434,15 @@
clocks = <&osc24M>;
};
+ pwm: pwm at 1c21400 {
+ compatible = "allwinner,sun8i-v3s-pwm",
+ "allwinner,sun7i-a20-pwm";
+ reg = <0x01c21400 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
lradc: lradc at 1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x400>;
@@ -408,6 +450,25 @@
status = "disabled";
};
+ codec: codec at 1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-v3s-codec";
+ reg = <0x01c22c00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "codec";
+ resets = <&ccu RST_BUS_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ allwinner,codec-analog-controls = <&codec_analog>;
+ status = "disabled";
+ };
+
+ codec_analog: codec-analog at 1c23000 {
+ compatible = "allwinner,sun8i-v3s-codec-analog";
+ reg = <0x01c23000 0x4>;
+ };
+
uart0: serial at 1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -415,6 +476,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -426,6 +489,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -437,6 +502,8 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
resets = <&ccu RST_BUS_UART2>;
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
@@ -516,6 +583,8 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
@@ -524,6 +593,17 @@
#size-cells = <0>;
};
+ gic: interrupt-controller at 1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x2000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
csi1: camera at 1cb4000 {
compatible = "allwinner,sun8i-v3s-csi";
reg = <0x01cb4000 0x3000>;
@@ -535,16 +615,5 @@
resets = <&ccu RST_BUS_CSI>;
status = "disabled";
};
-
- gic: interrupt-controller at 1c81000 {
- compatible = "arm,gic-400";
- reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
- <0x01c84000 0x2000>,
- <0x01c86000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
};
};
--
2.35.1
More information about the U-Boot
mailing list