[PATCH 3/3] imx: power-domain: Get rid of SMCCC dependency

[Adam Ford]

On Wed, Apr 6, 2022 at 7:27 AM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Adam,
>
> On Wed, Apr 6, 2022 at 9:22 AM Adam Ford <aford173 at gmail.com> wrote:
>
> > I tried to build the imx8mq last night, but I ran into issues.  I
> > never built an imx8mq bootloader before, so I think I'm missing
> > something.  I'll try to get to it again this week.  Sorry for the
> > delays.
>
> Please check doc/board/nxp/imx8mq_evk.rst for a reference.

Thanks for the heads up on the help file.  I was looking in the wrong
place for it.
>
> The flash.bin offset is 33K instead of 32K on imx8mm.

Unfortunately, the board hangs:

U-Boot SPL 2022.04-rc5-gfd0c0181d8 (Apr 06 2022 - 07:36:33 -0500)
PMIC:  PFUZE100 ID=0x10
Normal Boot
Trying to boot from MMC2
<hang>

I am not sure if it's related to your changes or something else is
broken.  I have to switch gears for now, but I'll try the master
branch to see if there are any differences in behavior once I have
some more time.

adam