please modify output of i.MX8MSCALE DDR Tool
Peng Fan (OSS)
peng.fan at oss.nxp.com
Fri Apr 29 09:49:35 CEST 2022
On 2022/4/28 21:10, Rasmus Villemoes wrote:
> Hi NXP folks
>
> Is it possible for you to modify the i.MX8MSCALE DDR Tool so that the
> lpddr4_timing.c files it emits use "static" in front of ddr_ddrc_cfg[]
> and all the other arrays it defines; the only symbol that file defines
> which should have external linkage is the final "struct dram_timing_info
> dram_timing" one.
>
> When preparing the timing data for a board which will ship with
> different amounts of RAM, and thus needing to have some board-logic to
> choose between multiple instances of struct dram_timing_info, it is
> quite a nuisance to have to modify these files manually over and over -
> there's not much to do about the dram_timing symbol, but all the other
> ones might as well be static always.
ddr tool owner is not in this list, I could forward to him, but better
submit your issue through community.nxp.com
Regards,
Peng.
>
> Rasmus
>
More information about the U-Boot
mailing list