[PATCH] ls10xxx: Use a sane SPL_SYS_MALLOC_F_LEN default

Fabio Estevam festevam at gmail.com
Thu Apr 28 18:23:43 CEST 2022


Hi Sean,

On Thu, Apr 28, 2022 at 1:02 PM Sean Anderson <sean.anderson at seco.com> wrote:
>
> SPL_SYS_MALLOC_F_LEN defaults to SYS_MALLOC_F_LEN. 0x10000 (the new
> default) is 64 KiB, or around half of the total OCRAM size. Revert to
> the previous default of 0x2000. This fixes SPL boot.
>
> Fixes: 545eceb520 ("imx8/ls10xx: Use a sane SYS_MALLOC_F_LEN default")
> Signed-off-by: Sean Anderson <sean.anderson at seco.com>

Thanks for the fix.

Would it be better to fix it like this instead?

--- a/Kconfig
+++ b/Kconfig
@@ -257,9 +257,7 @@ config SYS_MALLOC_F_LEN
        default 0x4000 if SANDBOX || RISCV || ARCH_APPLE || ROCKCHIP_RK3368 || \
                          ROCKCHIP_RK3399
        default 0x8000 if RCAR_GEN3
-       default 0x10000 if ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ) || \
-                          ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
-                          ARCH_LS1046A
+       default 0x10000 if ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ)
        default 0x2000
        help
          Before relocation, memory is very limited on many platforms. Still,


More information about the U-Boot mailing list