[PATCH] verdin-imx8mm, verdin-imx8mp: Fix default systemd console output

[Philippe Schenker]

From: Philippe Schenker <philippe.schenker at toradex.com>

systemd prints its messages on the last console= statement that it finds
in the kernel arguments. The current ordering sends the systemd messages
to tty1, by default this is the display.

Ensure that systemd sends its messages to the default UART, reorder the
console= statements accordingly.

Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>

---

 include/configs/verdin-imx8mm.h | 4 ++--
 include/configs/verdin-imx8mp.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 6c5b190dd9..1c8f8f6358 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -63,8 +63,8 @@
 	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
 		"tftp ${fdt_addr} verdin/${fdtfile}; " \
 		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"setup=setenv setupargs console=${console},${baudrate} " \
-		"console=tty1 consoleblank=0 earlycon\0" \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
+		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 9e29dc1903..076a70d2bf 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -82,7 +82,7 @@
 	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
 		"tftp ${fdt_addr} verdin/${fdtfile}; " \
 		"booti ${loadaddr} - ${fdt_addr}\0" \
-	"setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
+	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
 		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
-- 
2.35.1