[PATCH] verdin-imx8mm, verdin-imx8mp: Fix default systemd console output

[Marcel Ziswiler]

On Thu, 2022-04-21 at 11:23 +0200, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker at toradex.com>
> 
> systemd prints its messages on the last console= statement that it finds
> in the kernel arguments. The current ordering sends the systemd messages
> to tty1, by default this is the display.
> 
> Ensure that systemd sends its messages to the default UART, reorder the
> console= statements accordingly.
> 
> Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>

Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

> ---
> 
>  include/configs/verdin-imx8mm.h | 4 ++--
>  include/configs/verdin-imx8mp.h | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
> index 6c5b190dd9..1c8f8f6358 100644
> --- a/include/configs/verdin-imx8mm.h
> +++ b/include/configs/verdin-imx8mm.h
> @@ -63,8 +63,8 @@
>         "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
>                 "tftp ${fdt_addr} verdin/${fdtfile}; " \
>                 "booti ${loadaddr} - ${fdt_addr}\0" \
> -       "setup=setenv setupargs console=${console},${baudrate} " \
> -               "console=tty1 consoleblank=0 earlycon\0" \
> +       "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
> +               "consoleblank=0 earlycon\0" \
>         "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
>                 "if test \"$confirm\" = \"y\"; then " \
>                 "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
> diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
> index 9e29dc1903..076a70d2bf 100644
> --- a/include/configs/verdin-imx8mp.h
> +++ b/include/configs/verdin-imx8mp.h
> @@ -82,7 +82,7 @@
>         "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
>                 "tftp ${fdt_addr} verdin/${fdtfile}; " \
>                 "booti ${loadaddr} - ${fdt_addr}\0" \
> -       "setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
> +       "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
>                 "consoleblank=0 earlycon\0" \
>         "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
>                 "if test \"$confirm\" = \"y\"; then " \