[PATCH v2 18/23] pinctrl: sunxi: Add MMC pinmuxes
Andre Przywara
andre.przywara at arm.com
Fri Apr 1 01:20:58 CEST 2022
On Thu, 17 Mar 2022 22:54:15 -0500
Samuel Holland <samuel at sholland.org> wrote:
> Pin lists and mux values were taken from the Linux drivers.
>
> Signed-off-by: Samuel Holland <samuel at sholland.org>
Compared against the respective manuals:
Reviewed-by: Andre Przywara <andre.przywara at arm.com>
Cheers,
Andre
> ---
>
> (no changes since v1)
>
> drivers/pinctrl/sunxi/pinctrl-sunxi.c | 54 +++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index 3a2fbee324..14d40a016b 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -227,6 +227,8 @@ static const struct sunxi_pinctrl_function suniv_f1c100s_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 3 }, /* PE11-PE12 */
> { "i2c1", 3 }, /* PD5-PD6 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 3 }, /* PC0-PC2 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -247,6 +249,14 @@ static const struct sunxi_pinctrl_function sun4i_a10_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PB0-PB1 */
> { "i2c1", 2 }, /* PB18-PB19 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> +#if IS_ENABLED(CONFIG_MMC1_PINS_PH)
> + { "mmc1", 5 }, /* PH22-PH27 */
> +#else
> + { "mmc1", 4 }, /* PG0-PG5 */
> +#endif
> + { "mmc2", 3 }, /* PC6-PC15 */
> + { "mmc3", 2 }, /* PI4-PI9 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 4 }, /* PF2-PF4 */
> #else
> @@ -267,6 +277,9 @@ static const struct sunxi_pinctrl_function sun5i_a13_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PB0-PB1 */
> { "i2c1", 2 }, /* PB15-PB16 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG3-PG8 */
> + { "mmc2", 3 }, /* PC6-PC15 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 4 }, /* PF2-PF4 */
> #else
> @@ -288,6 +301,10 @@ static const struct sunxi_pinctrl_function sun6i_a31_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PH14-PH15 */
> { "i2c1", 2 }, /* PH16-PH17 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC6-PC15, PC24 */
> + { "mmc3", 4 }, /* PC6-PC15, PC24 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -323,6 +340,13 @@ static const struct sunxi_pinctrl_function sun7i_a20_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PB0-PB1 */
> { "i2c1", 2 }, /* PB18-PB19 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> +#if IS_ENABLED(CONFIG_MMC1_PINS_PH)
> + { "mmc1", 5 }, /* PH22-PH27 */
> +#else
> + { "mmc1", 4 }, /* PG0-PG5 */
> +#endif
> + { "mmc2", 3 }, /* PC5-PC15, PC24 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 4 }, /* PF2-PF4 */
> #else
> @@ -342,6 +366,9 @@ static const struct sunxi_pinctrl_function sun8i_a23_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PH2-PH3 */
> { "i2c1", 2 }, /* PH4-PH5 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC5-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #endif
> @@ -375,6 +402,9 @@ static const struct sunxi_pinctrl_function sun8i_a33_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PH2-PH3 */
> { "i2c1", 2 }, /* PH4-PH5 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC5-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -397,6 +427,9 @@ static const struct sunxi_pinctrl_function sun8i_a83t_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PH0-PH1 */
> { "i2c1", 2 }, /* PH2-PH3 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC5-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -433,6 +466,9 @@ static const struct sunxi_pinctrl_function sun8i_h3_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PA11-PA12 */
> { "i2c1", 3 }, /* PA18-PA19 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC5-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -469,6 +505,9 @@ static const struct sunxi_pinctrl_function sun8i_v3s_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PB6-PB7 */
> { "i2c1", 2 }, /* PB8-PB9 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 2 }, /* PC0-PC10 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -491,6 +530,9 @@ static const struct sunxi_pinctrl_function sun9i_a80_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PH0-PH1 */
> { "i2c1", 2 }, /* PH2-PH3 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC6-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 4 }, /* PF2-PF4 */
> #else
> @@ -526,6 +568,9 @@ static const struct sunxi_pinctrl_function sun50i_a64_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PH0-PH1 */
> { "i2c1", 2 }, /* PH2-PH3 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC1-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -562,6 +607,9 @@ static const struct sunxi_pinctrl_function sun50i_h5_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PA11-PA12 */
> { "i2c1", 2 }, /* PA18-PA19 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC1-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -584,6 +632,9 @@ static const struct sunxi_pinctrl_function sun50i_h6_pinctrl_functions[] = {
> { "gpio_out", 1 },
> { "i2c0", 2 }, /* PD25-PD26 */
> { "i2c1", 4 }, /* PH5-PH6 */
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC1-PC14 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
> @@ -617,6 +668,9 @@ static const struct sunxi_pinctrl_function sun50i_h616_pinctrl_functions[] = {
> { "emac0", 2 }, /* PI0-PI16 */
> { "gpio_in", 0 },
> { "gpio_out", 1 },
> + { "mmc0", 2 }, /* PF0-PF5 */
> + { "mmc1", 2 }, /* PG0-PG5 */
> + { "mmc2", 3 }, /* PC0-PC16 */
> #if IS_ENABLED(CONFIG_UART0_PORT_F)
> { "uart0", 3 }, /* PF2-PF4 */
> #else
More information about the U-Boot
mailing list