[PATCH] board: gateworks: venice: add fixup for GW73xx-C+

Tim Harvey tharvey at gateworks.com
Thu Apr 28 01:43:56 CEST 2022


The GW73xx-C revision and onward replaced the 5-port PCIe switch with a
4-port (dropping PCIe to one of the miniPCIe sockets) due to part
availability. This moved the PCI bus of the GbE eth1 device. Use a fixup
to adjust the dt accordingly so that local-mac-address assigned from dt
works on new revision boards.

While we are at it, rename 'blob' to 'fdt' for clarity.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 board/gateworks/venice/eeprom.c |  7 ++++++
 board/gateworks/venice/eeprom.h |  3 +++
 board/gateworks/venice/venice.c | 43 +++++++++++++++++++++++++++------
 3 files changed, 46 insertions(+), 7 deletions(-)

diff --git a/board/gateworks/venice/eeprom.c b/board/gateworks/venice/eeprom.c
index 7a46f44828ce..b754ef95903f 100644
--- a/board/gateworks/venice/eeprom.c
+++ b/board/gateworks/venice/eeprom.c
@@ -20,6 +20,7 @@
 struct venice_board_info som_info;
 struct venice_board_info base_info;
 char venice_model[32];
+char venice_baseboard_model[32];
 u32 venice_serial;
 
 /* return a mac address from EEPROM info */
@@ -321,6 +322,7 @@ int eeprom_init(int quiet)
 			base_info.model[3], /* baseboard */
 			base_info.model[4], base_info.model[5], /* subload of baseboard */
 			som_info.model[4], som_info.model[5]); /* last 2digits of SOM */
+		strncpy(venice_baseboard_model, base_info.model, sizeof(venice_baseboard_model));
 
 		/* baseboard revision */
 		rev_pcb = get_pcb_rev(base_info.model);
@@ -357,6 +359,11 @@ const char *eeprom_get_model(void)
 	return venice_model;
 }
 
+const char *eeprom_get_baseboard_model(void)
+{
+	return venice_baseboard_model;
+}
+
 u32 eeprom_get_serial(void)
 {
 	return venice_serial;
diff --git a/board/gateworks/venice/eeprom.h b/board/gateworks/venice/eeprom.h
index 37bfe76ad81e..8ea7318d7dfc 100644
--- a/board/gateworks/venice/eeprom.h
+++ b/board/gateworks/venice/eeprom.h
@@ -26,8 +26,11 @@ struct venice_board_info {
 
 int eeprom_init(int quiet);
 const char *eeprom_get_model(void);
+const char *eeprom_get_baseboard_model(void);
 const char *eeprom_get_dtb_name(int level, char *buf, int len);
 int eeprom_getmac(int index, uint8_t *enetaddr);
 uint32_t eeprom_get_serial(void);
+int get_bom_rev(const char *str);
+char get_pcb_rev(const char *str);
 
 #endif
diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c
index 4290a6980771..976b0c70f128 100644
--- a/board/gateworks/venice/venice.c
+++ b/board/gateworks/venice/venice.c
@@ -3,6 +3,7 @@
  * Copyright 2021 Gateworks Corporation
  */
 
+#include <fdt_support.h>
 #include <init.h>
 #include <led.h>
 #include <miiphy.h>
@@ -171,26 +172,54 @@ int board_mmc_get_env_dev(int devno)
 	return devno;
 }
 
-int ft_board_setup(void *blob, struct bd_info *bd)
+int ft_board_setup(void *fdt, struct bd_info *bd)
 {
+	const char *base_model = eeprom_get_baseboard_model();
+	char pcbrev;
 	int off;
 
 	/* set board model dt prop */
-	fdt_setprop_string(blob, 0, "board", eeprom_get_model());
+	fdt_setprop_string(fdt, 0, "board", eeprom_get_model());
 
 	/* update temp thresholds */
-	off = fdt_path_offset(blob, "/thermal-zones/cpu-thermal/trips");
+	off = fdt_path_offset(fdt, "/thermal-zones/cpu-thermal/trips");
 	if (off >= 0) {
 		int minc, maxc, prop;
 
 		get_cpu_temp_grade(&minc, &maxc);
-		fdt_for_each_subnode(prop, blob, off) {
-			const char *type = fdt_getprop(blob, prop, "type", NULL);
+		fdt_for_each_subnode(prop, fdt, off) {
+			const char *type = fdt_getprop(fdt, prop, "type", NULL);
 
 			if (type && (!strcmp("critical", type)))
-				fdt_setprop_u32(blob, prop, "temperature", maxc * 1000);
+				fdt_setprop_u32(fdt, prop, "temperature", maxc * 1000);
 			else if (type && (!strcmp("passive", type)))
-				fdt_setprop_u32(blob, prop, "temperature", (maxc - 10) * 1000);
+				fdt_setprop_u32(fdt, prop, "temperature", (maxc - 10) * 1000);
+		}
+	}
+
+	if (!strncmp(base_model, "GW73", 4)) {
+		pcbrev = get_pcb_rev(base_model);
+
+		if (pcbrev > 'B') {
+			printf("adjusting dt for %s\n", base_model);
+
+			/*
+			 * revC replaced PCIe 5-port switch with 4-port
+			 * which changed ethernet1 PCIe GbE
+			 * from: pcie at 0,0/pcie at 1,0/pcie at 2,4/pcie at 6.0
+			 *   to: pcie at 0,0/pcie at 1,0/pcie at 2,3/pcie at 5.0
+			 */
+			off = fdt_path_offset(fdt, "ethernet1");
+			if (off > 0) {
+				uint32_t reg[5];
+
+				fdt_set_name(fdt, off, "pcie at 5,0");
+				off = fdt_parent_offset(fdt, off);
+				fdt_set_name(fdt, off, "pcie at 2,3");
+				memset(reg, 0, sizeof(reg));
+				reg[0] = cpu_to_fdt32(PCI_DEVFN(3, 0));
+				fdt_setprop(fdt, off, "reg", reg, sizeof(reg));
+			}
 		}
 	}
 
-- 
2.17.1



More information about the U-Boot mailing list