[PATCH V3 0/4] imx: imx8m: enable DM SERIAL
Peng Fan (OSS)
peng.fan at oss.nxp.com
Wed Apr 13 04:11:47 CEST 2022
From: Peng Fan <peng.fan at nxp.com>
V3:
Add missed Signed-off-by
Rebased to only add CONFIG_DM_SERIAL, not touch other config change in defconfig
V2:
Include imx8mq-evk in this patchset.
For i.MX8MN/M/P, drop board level uart pinmux settings,
move preloader_console_init after driver probe.
Tested on all four boards. Note i.MX8MQ-EVK not have SPL_DM, so pinmux for
uart still there for spl usage.
Peng Fan (4):
imx: imx8mp_evk: enable CONFIG_DM_SERIAL
imx: imx8mm_evk: enable CONFIG_DM_SERIAL
imx: imx8mn_evk: enable CONFIG_DM_SERIAL
imx: imx8mq-evk: enable CONFIG_DM_SERIAL
arch/arm/dts/imx8mq-evk-u-boot.dtsi | 32 +++++++++++++++++++++++++
board/freescale/imx8mm_evk/spl.c | 12 ++--------
board/freescale/imx8mn_evk/spl.c | 12 ++--------
board/freescale/imx8mp_evk/imx8mp_evk.c | 8 -------
configs/imx8mm_evk_defconfig | 1 +
configs/imx8mn_ddr4_evk_defconfig | 1 +
configs/imx8mn_evk_defconfig | 1 +
configs/imx8mp_evk_defconfig | 1 +
configs/imx8mq_evk_defconfig | 1 +
9 files changed, 41 insertions(+), 28 deletions(-)
--
2.35.1
More information about the U-Boot
mailing list