[PATCH 1/2] ARM: imx8mm: verdin-imx8mm: Rework board_early_init()

[Marek Vasut]

Rename board_early_init_f() to board_early_init(), since this function
has nothing to do with actual board_early_init_f() as used throughout
U-Boot. The board_early_init() is function local to this board used to
configure UART and WDT pinmux. Wrap init_uart_clk() into this function
so that early UART init would be all in one place. Turn the function
into __weak one, so it could be overridden in case custom carrier board
uses different UART or needs custom IOMUX settings.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Cc: Max Krummenacher <max.krummenacher at toradex.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 board/toradex/verdin-imx8mm/spl.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/board/toradex/verdin-imx8mm/spl.c b/board/toradex/verdin-imx8mm/spl.c
index 97d6a31da15..4e6128c3314 100644
--- a/board/toradex/verdin-imx8mm/spl.c
+++ b/board/toradex/verdin-imx8mm/spl.c
@@ -88,17 +88,17 @@ static iomux_v3_cfg_t const wdog_pads[] = {
 	IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
 
-int board_early_init_f(void)
+__weak void board_early_init(void)
 {
 	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
 
+	init_uart_clk(0);
+
 	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
 
 	set_wdog_reset(wdog);
 
 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-
-	return 0;
 }
 
 int power_init_board(void)
@@ -140,9 +140,7 @@ void board_init_f(ulong dummy)
 
 	arch_cpu_init();
 
-	init_uart_clk(0);
-
-	board_early_init_f();
+	board_early_init();
 
 	timer_init();
 
-- 
2.35.1