[PATCH 02/16] net: dm9000: Replace DM9000_DBG() with debug()
Marek Vasut
marex at denx.de
Mon Apr 11 19:55:53 CEST 2022
Use standard debug() macro to print debug messages instead of
reinventing driver-specific macro again. No functional change.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
---
drivers/net/dm9000x.c | 48 +++++++++++++++++++++----------------------
1 file changed, 23 insertions(+), 25 deletions(-)
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 93699135f75..e83b838fd82 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -63,7 +63,6 @@ TODO: external MII is not functional, only internal at the moment.
/* #define CONFIG_DM9000_DEBUG */
#ifdef CONFIG_DM9000_DEBUG
-#define DM9000_DBG(fmt,args...) printf(fmt, ##args)
#define DM9000_DMP_PACKET(func,packet,length) \
do { \
int i; \
@@ -75,7 +74,6 @@ TODO: external MII is not functional, only internal at the moment.
} printf("\n"); \
} while(0)
#else
-#define DM9000_DBG(fmt,args...)
#define DM9000_DMP_PACKET(func,packet,length)
#endif
@@ -128,16 +126,16 @@ static void dm9000_iow(int reg, u8 value);
static void
dump_regs(void)
{
- DM9000_DBG("\n");
- DM9000_DBG("NCR (0x00): %02x\n", dm9000_ior(0));
- DM9000_DBG("NSR (0x01): %02x\n", dm9000_ior(1));
- DM9000_DBG("TCR (0x02): %02x\n", dm9000_ior(2));
- DM9000_DBG("TSRI (0x03): %02x\n", dm9000_ior(3));
- DM9000_DBG("TSRII (0x04): %02x\n", dm9000_ior(4));
- DM9000_DBG("RCR (0x05): %02x\n", dm9000_ior(5));
- DM9000_DBG("RSR (0x06): %02x\n", dm9000_ior(6));
- DM9000_DBG("ISR (0xFE): %02x\n", dm9000_ior(DM9000_ISR));
- DM9000_DBG("\n");
+ debug("\n");
+ debug("NCR (0x00): %02x\n", dm9000_ior(0));
+ debug("NSR (0x01): %02x\n", dm9000_ior(1));
+ debug("TCR (0x02): %02x\n", dm9000_ior(2));
+ debug("TSRI (0x03): %02x\n", dm9000_ior(3));
+ debug("TSRII (0x04): %02x\n", dm9000_ior(4));
+ debug("RCR (0x05): %02x\n", dm9000_ior(5));
+ debug("RSR (0x06): %02x\n", dm9000_ior(6));
+ debug("ISR (0xFE): %02x\n", dm9000_ior(DM9000_ISR));
+ debug("\n");
}
#endif
@@ -246,7 +244,7 @@ dm9000_probe(void)
static void
dm9000_reset(void)
{
- DM9000_DBG("resetting DM9000\n");
+ debug("resetting DM9000\n");
/* Reset DM9000,
see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 */
@@ -259,7 +257,7 @@ dm9000_reset(void)
dm9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST));
do {
- DM9000_DBG("resetting the DM9000, 1st reset\n");
+ debug("resetting the DM9000, 1st reset\n");
udelay(25); /* Wait at least 20 us */
} while (dm9000_ior(DM9000_NCR) & 1);
@@ -267,7 +265,7 @@ dm9000_reset(void)
dm9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST)); /* Issue a second reset */
do {
- DM9000_DBG("resetting the DM9000, 2nd reset\n");
+ debug("resetting the DM9000, 2nd reset\n");
udelay(25); /* Wait at least 20 us */
} while (dm9000_ior(DM9000_NCR) & 1);
@@ -285,7 +283,7 @@ static int dm9000_init(struct eth_device *dev, struct bd_info *bd)
u8 io_mode;
struct board_info *db = &dm9000_info;
- DM9000_DBG("%s\n", __func__);
+ debug("%s\n", __func__);
/* RESET device */
dm9000_reset();
@@ -354,8 +352,8 @@ static int dm9000_init(struct eth_device *dev, struct bd_info *bd)
/* read back mac, just to be sure */
for (i = 0, oft = 0x10; i < 6; i++, oft++)
- DM9000_DBG("%02x:", dm9000_ior(oft));
- DM9000_DBG("\n");
+ debug("%02x:", dm9000_ior(oft));
+ debug("\n");
/* Activate DM9000 */
/* RX enable */
@@ -434,7 +432,7 @@ static int dm9000_send(struct eth_device *netdev, void *packet, int length)
}
dm9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
- DM9000_DBG("transmit done\n\n");
+ debug("transmit done\n\n");
return 0;
}
@@ -444,7 +442,7 @@ static int dm9000_send(struct eth_device *netdev, void *packet, int length)
*/
static void dm9000_halt(struct eth_device *netdev)
{
- DM9000_DBG("%s\n", __func__);
+ debug("%s\n", __func__);
/* RESET devie */
dm9000_phy_write(0, 0x8000); /* PHY RESET */
@@ -490,12 +488,12 @@ static int dm9000_rx(struct eth_device *netdev)
if (rxbyte != DM9000_PKT_RDY)
return 0; /* No packet received, ignore */
- DM9000_DBG("receiving packet\n");
+ debug("receiving packet\n");
/* A packet ready now & Get status/length */
(db->rx_status)(&RxStatus, &RxLen);
- DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+ debug("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
/* Move data from DM9000 */
/* Read received packet from RX SRAM */
@@ -519,7 +517,7 @@ static int dm9000_rx(struct eth_device *netdev)
} else {
DM9000_DMP_PACKET(__func__ , rdptr, RxLen);
- DM9000_DBG("passing packet to upper layer\n");
+ debug("passing packet to upper layer\n");
net_process_received_packet(net_rx_packets[0], RxLen);
}
}
@@ -596,7 +594,7 @@ dm9000_phy_read(int reg)
val = (dm9000_ior(DM9000_EPDRH) << 8) | dm9000_ior(DM9000_EPDRL);
/* The read data keeps on REG_0D & REG_0E */
- DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
+ debug("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
return val;
}
@@ -616,7 +614,7 @@ dm9000_phy_write(int reg, u16 value)
dm9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
udelay(500); /* Wait write complete */
dm9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
- DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
+ debug("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
}
int dm9000_initialize(struct bd_info *bis)
--
2.35.1
More information about the U-Boot
mailing list