[PATCH 00/11] board: freescale: p1_p2_rdb_pc: Various cleanups and fixes

[Pali Rohár]

This patch series contains various cleanups and fixes for shared P1*/P2*
board code and preparation for introducing support for another P2020 board.

Pali Rohár (11):
  board: freescale: p1_p2_rdb_pc: Do not hang in checkboard()
  board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch
    configurations
  board: freescale: p1_p2_rdb_pc: Fix parsing negated upper 4 bits from
    boot input data
  board: freescale: p1_p2_rdb_pc: Do not set MPC85xx_PMUXCR_SDHC_WP bit
    when SDHC_WP is used as GPIO
  board: freescale: p1_p2_rdb_pc: Fix page attributes for second 1G
    SDRAM map
  board: freescale: p1_p2_rdb_pc: Move ifdef for USB/eLBC check to
    correct place
  board: freescale: p1_p2_rdb_pc: Fix env $vscfw_addr
  board: freescale: p1_p2_rdb_pc: Use named macros for i2c bus num and
    address
  board: freescale: p1_p2_rdb_pc: Define SW macros for lower and upper
    NOR banks
  board: freescale: p1_p2_rdb_pc: Move BootROM change source macros to
    p1_p2_bootrom.h
  board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot,
    norupperboot, sd2boot and defboot

 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c |  20 ++-
 board/freescale/p1_p2_rdb_pc/tlb.c          |   6 +-
 include/configs/p1_p2_bootrom.h             |  46 +++++++
 include/configs/p1_p2_rdb_pc.h              | 130 +++++++++++++++-----
 4 files changed, 164 insertions(+), 38 deletions(-)
 create mode 100644 include/configs/p1_p2_bootrom.h

-- 
2.20.1