[PATCH v2 51/52] mips: octeon: ebb7304: Enable ethernet support

[Stefan Roese]

This patch enables the Kconfig symbols needed for full ethernet support
on the EBB7304. Also the PHY autonegotiation timeout is increased, as
the default 5 seconds are sometime a bit short. With this, ethernet can
be used on this board. Here an example of a tftp load:

=> tftp ffffffff81000000 big
ethernet-mac-nexus at 11800e0000000 Waiting for PHY auto negotiation to complete....... done
Using ethernet-mac-nexus at 11800e0000000 device
TFTP from server 192.168.1.5; our IP address is 192.168.1.243
Filename 'big'.
Load address: 0xffffffff81000000
Loading: ##################################################  10 MiB
         13.2 MiB/s
done
Bytes transferred = 10485760 (a00000 hex)

Signed-off-by: Stefan Roese <sr at denx.de>
---
 configs/octeon_ebb7304_defconfig | 7 +++++++
 include/configs/octeon_ebb7304.h | 2 ++
 2 files changed, 9 insertions(+)

diff --git a/configs/octeon_ebb7304_defconfig b/configs/octeon_ebb7304_defconfig
index 9824f8b97ae5..3d9bbaaab4df 100644
--- a/configs/octeon_ebb7304_defconfig
+++ b/configs/octeon_ebb7304_defconfig
@@ -25,6 +25,7 @@ CONFIG_CMD_PART=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_RTC=y
 CONFIG_CMD_TIME=y
@@ -36,6 +37,7 @@ CONFIG_EFI_PARTITION=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0x800000001FBFE000
+CONFIG_TFTP_TSIZE=y
 CONFIG_CLK=y
 # CONFIG_INPUT is not set
 CONFIG_MISC=y
@@ -53,7 +55,12 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MARVELL=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_E1000=y
+CONFIG_NET_OCTEON=y
 CONFIG_PCI=y
 CONFIG_PCIE_OCTEON=y
 CONFIG_DM_REGULATOR=y
diff --git a/include/configs/octeon_ebb7304.h b/include/configs/octeon_ebb7304.h
index 358db69a05b3..8c6c57bd546a 100644
--- a/include/configs/octeon_ebb7304.h
+++ b/include/configs/octeon_ebb7304.h
@@ -16,4 +16,6 @@
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
 
+#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
+
 #endif /* __CONFIG_H__ */
-- 
2.35.1