[PATCHv3 0/3] Add support for sam9x60_curiosity

[Eugen.Hristev at microchip.com]

On 4/4/22 8:53 AM, Durai Manickam KR wrote:
> ---
> v2 -> v3:
> - Few symbols defined in the board specific header file (i.e)
>    sam9x60_curiosity.h are no longer accepted by the u-boot mainline. So the
>    below changes has been done.
> - NAND symbols are no longer accepted by the u-boot mainline. This shall be
>    migrated to device tree model. So, this patch series contains only SDMMC
>    support. NAND support will be added once device tree model is implemented.
> - Removed sam9x60_curiosity_nand_hw_init function from the board specific C file.
> - Removed the NAND config support in the SDMMC defconfig.
> - Converted CONFIG_BOOTP_BOOTFILESIZE to Kconfig
> 
> ---
> v1 -> v2:
> - This patch series adds support for sam9x60_curiosity.
> - Converted CONFIG_ATMEL_LEGACY to Kconfig. Previosly sent patch series from
>    u-boot/master branch now sending the patch series on top of u-boot/next branch
>    as v2.
> 
> Durai Manickam KR (3):
>    board: Add sam9x60_curiosity support
>    ARM: dts: Add device tree files for sam9x60_curiosity
>    configs: Add sam9x60_curiosity_mmc_defconfig
> 
>   arch/arm/dts/Makefile                         |  2 +
>   .../dts/at91-sam9x60_curiosity-u-boot.dtsi    | 79 +++++++++++++++++++
>   arch/arm/dts/at91-sam9x60_curiosity.dts       | 74 +++++++++++++++++
>   arch/arm/mach-at91/Kconfig                    |  7 ++
>   board/atmel/sam9x60_curiosity/Kconfig         | 15 ++++
>   board/atmel/sam9x60_curiosity/MAINTAINERS     |  7 ++
>   board/atmel/sam9x60_curiosity/Makefile        |  7 ++
>   .../sam9x60_curiosity/sam9x60_curiosity.c     | 75 ++++++++++++++++++
>   configs/sam9x60_curiosity_mmc_defconfig       | 74 +++++++++++++++++
>   include/configs/sam9x60_curiosity.h           | 31 ++++++++
>   10 files changed, 371 insertions(+)
>   create mode 100644 arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi
>   create mode 100644 arch/arm/dts/at91-sam9x60_curiosity.dts
>   create mode 100644 board/atmel/sam9x60_curiosity/Kconfig
>   create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS
>   create mode 100644 board/atmel/sam9x60_curiosity/Makefile
>   create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
>   create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
>   create mode 100644 include/configs/sam9x60_curiosity.h
> 
> --
> 2.25.1
> 

Applied to u-boot-at91/master , thanks !