[PATCH 02/11] board: freescale: p1_p2_rdb_pc: Detect both P2020 SD switch configurations

[Pali Rohár]

As written in comment, P2020 has two possible SD switch configurations.
Extend code to detect both of them.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 4 ++++
 include/configs/p1_p2_rdb_pc.h              | 3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 186887336354..29502a5c05c2 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -207,6 +207,10 @@ int checkboard(void)
 	puts("rom_loc: ");
 	if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SD) {
 		puts("sd");
+#ifdef __SW_BOOT_SD2
+	} else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SD2) {
+		puts("sd");
+#endif
 #ifdef __SW_BOOT_SPI
 	} else if ((val & (~__SW_BOOT_MASK)) == __SW_BOOT_SPI) {
 		puts("spi");
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 370772053e63..ecc6e0c644bf 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -60,7 +60,8 @@
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xc8
 #define __SW_BOOT_SPI		0x28
-#define __SW_BOOT_SD		0x68 /* or 0x18 */
+#define __SW_BOOT_SD		0x68
+#define __SW_BOOT_SD2		0x18
 #define __SW_BOOT_NAND		0xe8
 #define __SW_BOOT_PCIE		0xa8
 #define CONFIG_SYS_L2_SIZE	(512 << 10)
-- 
2.20.1