[PATCH v2 34/52] mips: octeon: Add cvmx-pko.c

Stefan Roese sr at denx.de
Thu Apr 7 09:11:36 CEST 2022


From: Aaron Williams <awilliams at marvell.com>

Import cvmx-pko.c from 2013 U-Boot. It will be used by the later
added drivers to support networking on the MIPS Octeon II / III
platforms.

Signed-off-by: Aaron Williams <awilliams at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---
 arch/mips/mach-octeon/cvmx-pko.c | 788 +++++++++++++++++++++++++++++++
 1 file changed, 788 insertions(+)
 create mode 100644 arch/mips/mach-octeon/cvmx-pko.c

diff --git a/arch/mips/mach-octeon/cvmx-pko.c b/arch/mips/mach-octeon/cvmx-pko.c
new file mode 100644
index 000000000000..8a9181362bda
--- /dev/null
+++ b/arch/mips/mach-octeon/cvmx-pko.c
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2022 Marvell International Ltd.
+ *
+ * Support library for the hardware Packet Output unit.
+ */
+
+#include <errno.h>
+#include <log.h>
+#include <time.h>
+#include <linux/delay.h>
+
+#include <mach/cvmx-regs.h>
+#include <mach/cvmx-csr.h>
+#include <mach/cvmx-bootmem.h>
+#include <mach/octeon-model.h>
+#include <mach/cvmx-fuse.h>
+#include <mach/octeon-feature.h>
+#include <mach/cvmx-qlm.h>
+#include <mach/octeon_qlm.h>
+#include <mach/cvmx-pcie.h>
+#include <mach/cvmx-coremask.h>
+
+#include <mach/cvmx-agl-defs.h>
+#include <mach/cvmx-bgxx-defs.h>
+#include <mach/cvmx-ciu-defs.h>
+#include <mach/cvmx-gmxx-defs.h>
+#include <mach/cvmx-gserx-defs.h>
+#include <mach/cvmx-ilk-defs.h>
+#include <mach/cvmx-iob-defs.h>
+#include <mach/cvmx-ipd-defs.h>
+#include <mach/cvmx-pcsx-defs.h>
+#include <mach/cvmx-pcsxx-defs.h>
+#include <mach/cvmx-pki-defs.h>
+#include <mach/cvmx-pko-defs.h>
+#include <mach/cvmx-xcv-defs.h>
+
+#include <mach/cvmx-hwpko.h>
+#include <mach/cvmx-ilk.h>
+#include <mach/cvmx-pki.h>
+#include <mach/cvmx-pko3.h>
+#include <mach/cvmx-pko3-queue.h>
+#include <mach/cvmx-pko3-resources.h>
+
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-board.h>
+#include <mach/cvmx-helper-cfg.h>
+
+#include <mach/cvmx-helper-bgx.h>
+#include <mach/cvmx-helper-cfg.h>
+#include <mach/cvmx-helper-util.h>
+#include <mach/cvmx-helper-pki.h>
+#include <mach/cvmx-helper-pko.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CVMX_PKO_NQ_PER_PORT_MAX 32
+
+static cvmx_pko_return_value_t cvmx_pko2_config_port(short ipd_port,
+						     int base_queue,
+						     int num_queues,
+						     const u8 priority[]);
+
+static const int debug;
+
+/**
+ * Internal state of packet output
+ */
+
+/*
+ * PKO port iterator
+ * XXX this macro only works for 68XX
+ */
+
+#define pko_for_each_port(__p)                                                 \
+	for (__p = 0; __p < CVMX_HELPER_CFG_MAX_PKO_PORT; __p++)               \
+		if (__cvmx_helper_cfg_pko_queue_base(__p) !=                   \
+		    CVMX_HELPER_CFG_INVALID_VALUE)
+
+/*
+ * @INTERNAL
+ *
+ * Get INT for a port
+ *
+ * @param interface
+ * @param index
+ * @return the INT value on success and -1 on error
+ *
+ * This function is only for CN68XX.
+ */
+static int __cvmx_pko_int(int interface, int index)
+{
+	cvmx_helper_cfg_assert(interface < CVMX_HELPER_MAX_IFACE);
+	cvmx_helper_cfg_assert(index >= 0);
+
+	switch (interface) {
+	case 0:
+		cvmx_helper_cfg_assert(index < 4);
+		return index;
+	case 1:
+		cvmx_helper_cfg_assert(index == 0);
+		return 4;
+	case 2:
+		cvmx_helper_cfg_assert(index < 4);
+		return index + 8;
+	case 3:
+		cvmx_helper_cfg_assert(index < 4);
+		return index + 0xC;
+	case 4:
+		cvmx_helper_cfg_assert(index < 4);
+		return index + 0x10;
+	case 5:
+		cvmx_helper_cfg_assert(index < 256);
+		return 0x1C;
+	case 6:
+		cvmx_helper_cfg_assert(index < 256);
+		return 0x1D;
+	case 7:
+		cvmx_helper_cfg_assert(index < 32);
+		return 0x1E;
+	case 8:
+		cvmx_helper_cfg_assert(index < 8);
+		return 0x1F;
+	}
+
+	return -1;
+}
+
+int cvmx_pko_get_base_pko_port(int interface, int index)
+{
+	if (octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE))
+		return cvmx_helper_get_ipd_port(interface, index);
+	else if (octeon_has_feature(OCTEON_FEATURE_PKND))
+		return __cvmx_helper_cfg_pko_port_base(interface, index);
+	else
+		return cvmx_helper_get_ipd_port(interface, index);
+}
+
+int cvmx_pko_get_base_queue(int port)
+{
+	if (octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) {
+		return cvmx_pko3_get_queue_base(port);
+	} else if (octeon_has_feature(OCTEON_FEATURE_PKND)) {
+		return __cvmx_helper_cfg_pko_queue_base(
+			cvmx_helper_cfg_ipd2pko_port_base(port));
+	} else {
+		if (port < 48)
+			return cvmx_pko_queue_table[port].ccppp_queue_base;
+		else
+			return CVMX_PKO_ILLEGAL_QUEUE;
+	}
+}
+
+int cvmx_pko_get_num_queues(int port)
+{
+	if (octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) {
+		return cvmx_pko3_get_queue_num(port);
+	} else if (octeon_has_feature(OCTEON_FEATURE_PKND)) {
+		return __cvmx_helper_cfg_pko_queue_num(
+			cvmx_helper_cfg_ipd2pko_port_base(port));
+	} else {
+		if (port < 48)
+			return cvmx_pko_queue_table[port].ccppp_num_queues;
+	}
+	return 0;
+}
+
+/*
+ * Allocate memory for PKO engines.
+ *
+ * @param engine is the PKO engine ID.
+ * @return # of 2KB-chunks allocated to this PKO engine.
+ */
+static int __cvmx_pko_memory_per_engine_o68(int engine)
+{
+	/* CN68XX has 40KB to devide between the engines in 2KB chunks */
+	int max_engine;
+	int size_per_engine;
+	int size;
+
+	max_engine = __cvmx_helper_cfg_pko_max_engine();
+	size_per_engine = 40 / 2 / max_engine;
+
+	if (engine >= max_engine)
+		/* Unused engines get no space */
+		size = 0;
+	else if (engine == max_engine - 1)
+		/*
+		 * The last engine gets all the space lost by rounding. This means
+		 * the ILK gets the most space
+		 */
+		size = 40 / 2 - engine * size_per_engine;
+	else
+		/* All other engines get the same space */
+		size = size_per_engine;
+
+	return size;
+}
+
+/*
+ * Setup one-to-one mapping between PKO2 iport and eport.
+ * @INTERNAL
+ */
+static void __cvmx_pko2_chip_init(void)
+{
+	int i;
+	int interface, index, port;
+	cvmx_helper_interface_mode_t mode;
+	union cvmx_pko_mem_iport_ptrs config;
+
+	/*
+	 * Initialize every iport with the invalid eid.
+	 */
+#define CVMX_O68_PKO2_INVALID_EID 31
+	config.u64 = 0;
+	config.s.eid = CVMX_O68_PKO2_INVALID_EID;
+	for (i = 0; i < CVMX_HELPER_CFG_MAX_PKO_PORT; i++) {
+		config.s.ipid = i;
+		csr_wr(CVMX_PKO_MEM_IPORT_PTRS, config.u64);
+	}
+
+	/*
+	 * Set up PKO_MEM_IPORT_PTRS
+	 */
+	pko_for_each_port(port) {
+		interface = __cvmx_helper_cfg_pko_port_interface(port);
+		index = __cvmx_helper_cfg_pko_port_index(port);
+		mode = cvmx_helper_interface_get_mode(interface);
+
+		if (mode == CVMX_HELPER_INTERFACE_MODE_DISABLED)
+			continue;
+
+		config.s.ipid = port;
+		config.s.qos_mask = 0xff;
+		config.s.crc = __cvmx_helper_get_has_fcs(interface);
+		config.s.min_pkt = __cvmx_helper_get_pko_padding(interface);
+		config.s.intr = __cvmx_pko_int(interface, index);
+		config.s.eid = __cvmx_helper_cfg_pko_port_eid(port);
+		config.s.pipe = (mode == CVMX_HELPER_INTERFACE_MODE_LOOP) ?
+					index :
+					      port;
+		csr_wr(CVMX_PKO_MEM_IPORT_PTRS, config.u64);
+	}
+}
+
+int __cvmx_pko_get_pipe(int interface, int index)
+{
+	/* The loopback ports do not have pipes */
+	if (cvmx_helper_interface_get_mode(interface) ==
+	    CVMX_HELPER_INTERFACE_MODE_LOOP)
+		return -1;
+	/* We use pko_port as the pipe. See __cvmx_pko_port_map_o68(). */
+	return cvmx_helper_get_pko_port(interface, index);
+}
+
+static void __cvmx_pko1_chip_init(void)
+{
+	int queue;
+	union cvmx_pko_mem_queue_ptrs config;
+	union cvmx_pko_reg_queue_ptrs1 config1;
+	const int port = CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID;
+
+	/* Initialize all queues to connect to port 63 (ILLEGAL_PID) */
+	for (queue = 0; queue < CVMX_PKO_MAX_OUTPUT_QUEUES; queue++) {
+		config1.u64 = 0;
+		config1.s.idx3 = 0;
+		config1.s.qid7 = queue >> 7;
+
+		config.u64 = 0;
+		config.s.tail = 1;
+		config.s.index = 0;
+		config.s.port = port;
+		config.s.queue = queue;
+		config.s.buf_ptr = 0;
+
+		csr_wr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64);
+		csr_wr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64);
+	}
+}
+
+/**
+ * Call before any other calls to initialize the packet
+ * output system.  This does chip global config, and should only be
+ * done by one core.
+ */
+void cvmx_pko_hw_init(u8 pool, unsigned int bufsize)
+{
+	union cvmx_pko_reg_cmd_buf config;
+	union cvmx_iob_fau_timeout fau_to;
+	int i;
+
+	if (debug)
+		debug("%s: pool=%u bufsz=%u\n", __func__, pool, bufsize);
+
+	/* chip-specific setup. */
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		__cvmx_pko2_chip_init();
+	else
+		__cvmx_pko1_chip_init();
+
+	/*
+	 * Set the size of the PKO command buffers to an odd number of
+	 * 64bit words. This allows the normal two word send to stay
+	 * aligned and never span a command word buffer.
+	 */
+	config.u64 = 0;
+	config.s.pool = pool;
+	config.s.size = bufsize / 8 - 1;
+	csr_wr(CVMX_PKO_REG_CMD_BUF, config.u64);
+
+	/*
+	 * Disable tagwait FAU timeout. This needs to be done before
+	 * anyone might start packet output using tags.
+	 */
+	fau_to.u64 = 0;
+	fau_to.s.tout_val = 0xfff;
+	fau_to.s.tout_enb = 0;
+	csr_wr(CVMX_IOB_FAU_TIMEOUT, fau_to.u64);
+
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
+		union cvmx_pko_reg_min_pkt min_pkt;
+
+		min_pkt.u64 = 0;
+		min_pkt.s.size1 = 59;
+		min_pkt.s.size2 = 59;
+		min_pkt.s.size3 = 59;
+		min_pkt.s.size4 = 59;
+		min_pkt.s.size5 = 59;
+		min_pkt.s.size6 = 59;
+		min_pkt.s.size7 = 59;
+		csr_wr(CVMX_PKO_REG_MIN_PKT, min_pkt.u64);
+	}
+
+	/*
+	 * If we aren't using all of the queues optimize PKO's
+	 * internal memory.
+	 */
+	if (OCTEON_IS_OCTEON2() || OCTEON_IS_MODEL(OCTEON_CN70XX)) {
+		int max_queues = __cvmx_helper_cfg_pko_max_queue();
+
+		if (OCTEON_IS_MODEL(OCTEON_CN68XX) && max_queues <= 32)
+			csr_wr(CVMX_PKO_REG_QUEUE_MODE, 3);
+		else if (max_queues <= 64)
+			csr_wr(CVMX_PKO_REG_QUEUE_MODE, 2);
+		else if (max_queues <= 128)
+			csr_wr(CVMX_PKO_REG_QUEUE_MODE, 1);
+		else
+			csr_wr(CVMX_PKO_REG_QUEUE_MODE, 0);
+		if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
+			for (i = 0; i < 2; i++) {
+				union cvmx_pko_reg_engine_storagex
+					engine_storage;
+
+#define PKO_ASSIGN_ENGINE_STORAGE(index)                                       \
+	engine_storage.s.engine##index =                                       \
+		__cvmx_pko_memory_per_engine_o68(16 * i + (index))
+
+				engine_storage.u64 = 0;
+				PKO_ASSIGN_ENGINE_STORAGE(0);
+				PKO_ASSIGN_ENGINE_STORAGE(1);
+				PKO_ASSIGN_ENGINE_STORAGE(2);
+				PKO_ASSIGN_ENGINE_STORAGE(3);
+				PKO_ASSIGN_ENGINE_STORAGE(4);
+				PKO_ASSIGN_ENGINE_STORAGE(5);
+				PKO_ASSIGN_ENGINE_STORAGE(6);
+				PKO_ASSIGN_ENGINE_STORAGE(7);
+				PKO_ASSIGN_ENGINE_STORAGE(8);
+				PKO_ASSIGN_ENGINE_STORAGE(9);
+				PKO_ASSIGN_ENGINE_STORAGE(10);
+				PKO_ASSIGN_ENGINE_STORAGE(11);
+				PKO_ASSIGN_ENGINE_STORAGE(12);
+				PKO_ASSIGN_ENGINE_STORAGE(13);
+				PKO_ASSIGN_ENGINE_STORAGE(14);
+				PKO_ASSIGN_ENGINE_STORAGE(15);
+				csr_wr(CVMX_PKO_REG_ENGINE_STORAGEX(i),
+				       engine_storage.u64);
+			}
+		}
+	}
+}
+
+/**
+ * Enables the packet output hardware. It must already be
+ * configured.
+ */
+void cvmx_pko_enable(void)
+{
+	union cvmx_pko_reg_flags flags;
+
+	flags.u64 = csr_rd(CVMX_PKO_REG_FLAGS);
+	if (flags.s.ena_pko)
+		debug("Warning: Enabling PKO when PKO already enabled.\n");
+
+	flags.s.ena_dwb = cvmx_helper_cfg_opt_get(CVMX_HELPER_CFG_OPT_USE_DWB);
+	flags.s.ena_pko = 1;
+	/*
+	 * always enable big endian for 3-word command.  Does nothing
+	 * for 2-word.
+	 */
+	flags.s.store_be = 1;
+	csr_wr(CVMX_PKO_REG_FLAGS, flags.u64);
+}
+
+/**
+ * Configure a output port and the associated queues for use.
+ *
+ * @param port       Port to configure.
+ * @param base_queue First queue number to associate with this port.
+ * @param num_queues Number of queues to associate with this port
+ * @param priority   Array of priority levels for each queue. Values are
+ *                   allowed to be 0-8. A value of 8 get 8 times the traffic
+ *                   of a value of 1.  A value of 0 indicates that no rounds
+ *                   will be participated in. These priorities can be changed
+ *                   on the fly while the pko is enabled. A priority of 9
+ *                   indicates that static priority should be used.  If static
+ *                   priority is used all queues with static priority must be
+ *                   contiguous starting at the base_queue, and lower numbered
+ *                   queues have higher priority than higher numbered queues.
+ *                   There must be num_queues elements in the array.
+ */
+cvmx_pko_return_value_t cvmx_pko_config_port(int port, int base_queue,
+					     int num_queues,
+					     const u8 priority[])
+{
+	cvmx_pko_return_value_t result_code;
+	int queue;
+	union cvmx_pko_mem_queue_ptrs config;
+	union cvmx_pko_reg_queue_ptrs1 config1;
+	int static_priority_base = -1;
+	int static_priority_end = -1;
+	int outputbuffer_pool = (int)cvmx_fpa_get_pko_pool();
+	u64 outputbuffer_pool_size = cvmx_fpa_get_pko_pool_block_size();
+
+	/* This function is not used for CN68XX */
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		return cvmx_pko2_config_port(port, base_queue, num_queues,
+					     priority);
+
+	if (debug)
+		debug("%s: port=%d queue=%d-%d pri %#x %#x %#x %#x\n", __func__,
+		      port, base_queue, (base_queue + num_queues - 1),
+		      priority[0], priority[1], priority[2], priority[3]);
+
+	/* The need to handle ILLEGAL_PID port argument
+	 * is obsolete now, the code here can be simplified.
+	 */
+
+	if (port >= CVMX_PKO_NUM_OUTPUT_PORTS &&
+	    port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) {
+		debug("ERROR: %s: Invalid port %llu\n", __func__,
+		      (unsigned long long)port);
+		return CVMX_PKO_INVALID_PORT;
+	}
+
+	if (base_queue + num_queues > CVMX_PKO_MAX_OUTPUT_QUEUES) {
+		debug("ERROR: %s: Invalid queue range port = %lld base=%llu numques=%lld\n",
+		      __func__, (unsigned long long)port,
+		      (unsigned long long)base_queue,
+		      (unsigned long long)num_queues);
+		return CVMX_PKO_INVALID_QUEUE;
+	}
+
+	if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) {
+		/*
+		 * Validate the static queue priority setup and set
+		 * static_priority_base and static_priority_end
+		 * accordingly.
+		 */
+		for (queue = 0; queue < num_queues; queue++) {
+			/* Find first queue of static priority */
+			int p_queue = queue % 16;
+
+			if (static_priority_base == -1 &&
+			    priority[p_queue] == CVMX_PKO_QUEUE_STATIC_PRIORITY)
+				static_priority_base = queue;
+			/* Find last queue of static priority */
+			if (static_priority_base != -1 &&
+			    static_priority_end == -1 &&
+			    priority[p_queue] !=
+				    CVMX_PKO_QUEUE_STATIC_PRIORITY &&
+			    queue)
+				static_priority_end = queue - 1;
+			else if (static_priority_base != -1 &&
+				 static_priority_end == -1 &&
+				 queue == num_queues - 1)
+				/* all queues're static priority */
+				static_priority_end = queue;
+
+			/*
+			 * Check to make sure all static priority
+			 * queues are contiguous.  Also catches some
+			 * cases of static priorites not starting at
+			 * queue 0.
+			 */
+			if (static_priority_end != -1 &&
+			    (int)queue > static_priority_end &&
+			    priority[p_queue] ==
+				    CVMX_PKO_QUEUE_STATIC_PRIORITY) {
+				debug("ERROR: %s: Static priority queues aren't contiguous or don't start at base queue. q: %d, eq: %d\n",
+				      __func__, (int)queue, static_priority_end);
+				return CVMX_PKO_INVALID_PRIORITY;
+			}
+		}
+		if (static_priority_base > 0) {
+			debug("ERROR: %s: Static priority queues don't start at base queue. sq: %d\n",
+			      __func__, static_priority_base);
+			return CVMX_PKO_INVALID_PRIORITY;
+		}
+	}
+
+	/*
+	 * At this point, static_priority_base and static_priority_end
+	 * are either both -1, or are valid start/end queue numbers
+	 */
+
+	result_code = CVMX_PKO_SUCCESS;
+
+	for (queue = 0; queue < num_queues; queue++) {
+		u64 *buf_ptr = NULL;
+		int p_queue = queue % 16;
+
+		config1.u64 = 0;
+		config1.s.idx3 = queue >> 3;
+		config1.s.qid7 = (base_queue + queue) >> 7;
+
+		config.u64 = 0;
+		config.s.tail = queue == (num_queues - 1);
+		config.s.index = queue;
+		config.s.port = port;
+		config.s.queue = base_queue + queue;
+
+		config.s.static_p = static_priority_base >= 0;
+		config.s.static_q = (int)queue <= static_priority_end;
+		config.s.s_tail = (int)queue == static_priority_end;
+		/*
+		 * Convert the priority into an enable bit field. Try
+		 * to space the bits out evenly so the packet don't
+		 * get grouped up.
+		 */
+		switch ((int)priority[p_queue]) {
+		case 0:
+			config.s.qos_mask = 0x00;
+			break;
+		case 1:
+			config.s.qos_mask = 0x01;
+			break;
+		case 2:
+			config.s.qos_mask = 0x11;
+			break;
+		case 3:
+			config.s.qos_mask = 0x49;
+			break;
+		case 4:
+			config.s.qos_mask = 0x55;
+			break;
+		case 5:
+			config.s.qos_mask = 0x57;
+			break;
+		case 6:
+			config.s.qos_mask = 0x77;
+			break;
+		case 7:
+			config.s.qos_mask = 0x7f;
+			break;
+		case 8:
+			config.s.qos_mask = 0xff;
+			break;
+		case CVMX_PKO_QUEUE_STATIC_PRIORITY:
+			config.s.qos_mask = 0xff;
+			break;
+		default:
+			debug("ERROR: %s: Invalid priority %llu\n", __func__,
+			      (unsigned long long)priority[p_queue]);
+			config.s.qos_mask = 0xff;
+			result_code = CVMX_PKO_INVALID_PRIORITY;
+			break;
+		}
+
+		if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) {
+			cvmx_cmd_queue_result_t cmd_res;
+
+			cmd_res = cvmx_cmd_queue_initialize(
+				CVMX_CMD_QUEUE_PKO(base_queue + queue),
+				CVMX_PKO_MAX_QUEUE_DEPTH, outputbuffer_pool,
+				outputbuffer_pool_size -
+					CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST *
+						8);
+			if (cmd_res != CVMX_CMD_QUEUE_SUCCESS) {
+				switch (cmd_res) {
+				case CVMX_CMD_QUEUE_NO_MEMORY:
+					debug("ERROR: %s: Unable to allocate output buffer\n",
+					      __func__);
+					return CVMX_PKO_NO_MEMORY;
+				case CVMX_CMD_QUEUE_ALREADY_SETUP:
+					debug("ERROR: %s: Port already setup. port=%d\n",
+					      __func__, (int)port);
+					return CVMX_PKO_PORT_ALREADY_SETUP;
+				case CVMX_CMD_QUEUE_INVALID_PARAM:
+				default:
+					debug("ERROR: %s: Command queue initialization failed.\n",
+					      __func__);
+					return CVMX_PKO_CMD_QUEUE_INIT_ERROR;
+				}
+			}
+
+			buf_ptr = (u64 *)cvmx_cmd_queue_buffer(
+				CVMX_CMD_QUEUE_PKO(base_queue + queue));
+			config.s.buf_ptr = cvmx_ptr_to_phys(buf_ptr);
+		} else {
+			config.s.buf_ptr = 0;
+		}
+
+		CVMX_SYNCWS;
+
+		csr_wr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64);
+		csr_wr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64);
+	}
+
+	return result_code;
+}
+
+/*
+ * Configure queues for an internal port.
+ * @INTERNAL
+ * @param pko_port PKO internal port number
+ * @note this is the PKO2 equivalent to cvmx_pko_config_port()
+ */
+static cvmx_pko_return_value_t cvmx_pko2_config_port(short ipd_port,
+						     int base_queue,
+						     int num_queues,
+						     const u8 priority[])
+{
+	int queue, pko_port;
+	int static_priority_base;
+	int static_priority_end;
+	union cvmx_pko_mem_iqueue_ptrs config;
+	u64 *buf_ptr = NULL;
+	int outputbuffer_pool = (int)cvmx_fpa_get_pko_pool();
+	u64 outputbuffer_pool_size = cvmx_fpa_get_pko_pool_block_size();
+
+	pko_port = cvmx_helper_cfg_ipd2pko_port_base(ipd_port);
+
+	if (debug)
+		debug("%s: ipd_port %d pko_iport %d qbase %d qnum %d\n",
+		      __func__, ipd_port, pko_port, base_queue, num_queues);
+
+	static_priority_base = -1;
+	static_priority_end = -1;
+
+	/*
+	 * static queue priority validation
+	 */
+	for (queue = 0; queue < num_queues; queue++) {
+		int p_queue = queue % 16;
+
+		if (static_priority_base == -1 &&
+		    priority[p_queue] == CVMX_PKO_QUEUE_STATIC_PRIORITY)
+			static_priority_base = queue;
+
+		if (static_priority_base != -1 && static_priority_end == -1 &&
+		    priority[p_queue] != CVMX_PKO_QUEUE_STATIC_PRIORITY &&
+		    queue)
+			static_priority_end = queue - 1;
+		else if (static_priority_base != -1 &&
+			 static_priority_end == -1 && queue == num_queues - 1)
+			static_priority_end =
+				queue; /* all queues are static priority */
+
+		/*
+		 * Check to make sure all static priority queues are contiguous.
+		 * Also catches some cases of static priorites not starting from
+		 * queue 0.
+		 */
+		if (static_priority_end != -1 &&
+		    (int)queue > static_priority_end &&
+		    priority[p_queue] == CVMX_PKO_QUEUE_STATIC_PRIORITY) {
+			debug("ERROR: %s: Static priority queues aren't contiguous or don't start at base queue. q: %d, eq: %d\n",
+			      __func__, (int)queue, static_priority_end);
+		}
+		if (static_priority_base > 0) {
+			debug("ERROR: %s: Static priority queues don't start at base queue. sq: %d\n",
+			      __func__, static_priority_base);
+		}
+	}
+
+	/*
+	 * main loop to set the fields of CVMX_PKO_MEM_IQUEUE_PTRS for
+	 * each queue
+	 */
+	for (queue = 0; queue < num_queues; queue++) {
+		int p_queue = queue % 8;
+
+		config.u64 = 0;
+		config.s.index = queue;
+		config.s.qid = base_queue + queue;
+		config.s.ipid = pko_port;
+		config.s.tail = (queue == (num_queues - 1));
+		config.s.s_tail = (queue == static_priority_end);
+		config.s.static_p = (static_priority_base >= 0);
+		config.s.static_q = (queue <= static_priority_end);
+
+		/*
+		 * Convert the priority into an enable bit field.
+		 * Try to space the bits out evenly so the packet
+		 * don't get grouped up.
+		 */
+		switch ((int)priority[p_queue]) {
+		case 0:
+			config.s.qos_mask = 0x00;
+			break;
+		case 1:
+			config.s.qos_mask = 0x01;
+			break;
+		case 2:
+			config.s.qos_mask = 0x11;
+			break;
+		case 3:
+			config.s.qos_mask = 0x49;
+			break;
+		case 4:
+			config.s.qos_mask = 0x55;
+			break;
+		case 5:
+			config.s.qos_mask = 0x57;
+			break;
+		case 6:
+			config.s.qos_mask = 0x77;
+			break;
+		case 7:
+			config.s.qos_mask = 0x7f;
+			break;
+		case 8:
+			config.s.qos_mask = 0xff;
+			break;
+		case CVMX_PKO_QUEUE_STATIC_PRIORITY:
+			config.s.qos_mask = 0xff;
+			break;
+		default:
+			debug("ERROR: %s: Invalid priority %llu\n", __func__,
+			      (unsigned long long)priority[p_queue]);
+			config.s.qos_mask = 0xff;
+			break;
+		}
+
+		/*
+		 * The command queues
+		 */
+		{
+			cvmx_cmd_queue_result_t cmd_res;
+
+			cmd_res = cvmx_cmd_queue_initialize(
+				CVMX_CMD_QUEUE_PKO(base_queue + queue),
+				CVMX_PKO_MAX_QUEUE_DEPTH, outputbuffer_pool,
+				(outputbuffer_pool_size -
+				 CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST * 8));
+
+			if (cmd_res != CVMX_CMD_QUEUE_SUCCESS) {
+				switch (cmd_res) {
+				case CVMX_CMD_QUEUE_NO_MEMORY:
+					debug("ERROR: %s: Unable to allocate output buffer\n",
+					      __func__);
+					break;
+				case CVMX_CMD_QUEUE_ALREADY_SETUP:
+					debug("ERROR: %s: Port already setup\n",
+					      __func__);
+					break;
+				case CVMX_CMD_QUEUE_INVALID_PARAM:
+				default:
+					debug("ERROR: %s: Command queue initialization failed.",
+					      __func__);
+					break;
+				}
+				debug(" pko_port%d base_queue%d num_queues%d queue%d.\n",
+				      pko_port, base_queue, num_queues, queue);
+			}
+
+			buf_ptr = (u64 *)cvmx_cmd_queue_buffer(
+				CVMX_CMD_QUEUE_PKO(base_queue + queue));
+			config.s.buf_ptr = cvmx_ptr_to_phys(buf_ptr) >> 7;
+		}
+
+		CVMX_SYNCWS;
+		csr_wr(CVMX_PKO_MEM_IQUEUE_PTRS, config.u64);
+	}
+
+	/* Error detection is resirable here */
+	return 0;
+}
-- 
2.35.1



More information about the U-Boot mailing list