[PATCH] video: stm32: stm32_ltdc: fix data enable polarity

Patrice CHOTARD patrice.chotard at foss.st.com
Fri Apr 22 09:51:09 CEST 2022


HI Yannick

On 4/6/22 10:37, Yannick FERTRE wrote:
> Wrong DISPLAY_FLAGS used to set the data enable polarity.
> 
> Signed-off-by: Yannick FERTRE <yannick.fertre at foss.st.com>
> ---
> 
>  drivers/video/stm32/stm32_ltdc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c
> index e741e74739..9269d4bfb4 100644
> --- a/drivers/video/stm32/stm32_ltdc.c
> +++ b/drivers/video/stm32/stm32_ltdc.c
> @@ -255,7 +255,7 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,
>  		val |= GCR_HSPOL;
>  	if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH)
>  		val |= GCR_VSPOL;
> -	if (timings->flags & DISPLAY_FLAGS_DE_HIGH)
> +	if (timings->flags & DISPLAY_FLAGS_DE_LOW)
>  		val |= GCR_DEPOL;
>  	if (timings->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
>  		val |= GCR_PCPOL;

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks 
Patrice


More information about the U-Boot mailing list