[EXT] [PATCH] clk: imx8mp: Fill in DWC3 USB, USB PHY, HSIOMIX clock
Ye Li
ye.li at nxp.com
Fri Apr 1 05:33:52 CEST 2022
On Fri, 2022-04-01 at 03:17 +0200, Marek Vasut wrote:
> Caution: EXT Email
>
> Add clock tables required to bring up DWC3 USB, USB PHY and HSIOMIX
> domain.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> drivers/clk/imx/clk-imx8mp.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-
> imx8mp.c
> index c77500bcce0..1aca30d2f71 100644
> --- a/drivers/clk/imx/clk-imx8mp.c
> +++ b/drivers/clk/imx/clk-imx8mp.c
> @@ -76,6 +76,10 @@ static const char *imx8mp_a53_sels[] = {"clock-
> osc-24m", "arm_pll_out", "sys_pll
> "sys_pll2_1000m",
> "sys_pll1_800m", "sys_pll1_400m",
> "audio_pll1_out",
> "sys_pll3_out", };
>
> +static const char *imx8mp_hsio_axi_sels[] = {"clock-osc-24m",
> "sys_pll2_500m", "sys_pll1_800m",
> + "sys_pll2_100m",
> "sys_pll2_200m", "clk_ext2",
> + "clk_ext4",
> "audio_pll2_out", };
> +
> static const char *imx8mp_main_axi_sels[] = {"clock-osc-24m",
> "sys_pll2_333m", "sys_pll1_800m",
> "sys_pll2_250m",
> "sys_pll2_1000m", "audio_pll1_out",
> "video_pll1_out",
> "sys_pll1_100m",};
> @@ -156,6 +160,14 @@ static const char *imx8mp_uart4_sels[] =
> {"clock-osc-24m", "sys_pll1_80m", "sys_
> "sys_pll2_100m",
> "sys_pll3_out", "clk_ext2",
> "clk_ext3",
> "audio_pll2_out", };
>
> +static const char *imx8mp_usb_core_ref_sels[] = {"clock-osc-24m",
> "sys_pll1_100m", "sys_pll1_40m",
> + "sys_pll2_100m",
> "sys_pll2_200m", "clk_ext2",
> + "clk_ext3",
> "audio_pll2_out", };
> +
> +static const char *imx8mp_usb_phy_ref_sels[] = {"clock-osc-24m",
> "sys_pll1_100m", "sys_pll1_40m",
> + "sys_pll2_100m",
> "sys_pll2_200m", "clk_ext2",
> + "clk_ext3",
> "audio_pll2_out", };
> +
> static const char *imx8mp_gic_sels[] = {"clock-osc-24m",
> "sys_pll2_200m", "sys_pll1_40m",
> "sys_pll2_100m",
> "sys_pll1_800m",
> "sys_pll2_500m", "clk_ext4",
> "audio_pll2_out" };
> @@ -324,6 +336,8 @@ static int imx8mp_clk_probe(struct udevice *dev)
> clk_dm(IMX8MP_SYS_PLL2_500M,
> imx_clk_fixed_factor("sys_pll2_500m", "sys_pll2_out", 1, 2));
> clk_dm(IMX8MP_SYS_PLL2_1000M,
> imx_clk_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1));
>
> + clk_dm(IMX8MP_CLK_24M, imx_clk_fixed_factor("clock-osc-24m",
> "osc_24m", 1, 1));
osc_24m is an fixed-rate clock device. no need to register it again.
Just using below codes to get the device probed, then assign id to it.
struct clk osc_24m_clk;
ret = clk_get_by_name(dev, "osc_24m", &osc_24m_clk);
if (ret)
return ret;
clk_dm(IMX8MP_CLK_24M, dev_get_clk_ptr(osc_24m_clk.dev));
Best regards,
Ye Li
> +
> base = dev_read_addr_ptr(dev);
> if (!base)
> return -EINVAL;
> @@ -332,6 +346,7 @@ static int imx8mp_clk_probe(struct udevice *dev)
> clk_dm(IMX8MP_CLK_A53_CG, imx_clk_gate3("arm_a53_cg",
> "arm_a53_src", base + 0x8000, 28));
> clk_dm(IMX8MP_CLK_A53_DIV, imx_clk_divider2("arm_a53_div",
> "arm_a53_cg", base + 0x8000, 0, 3));
>
> + clk_dm(IMX8MP_CLK_HSIO_AXI, imx8m_clk_composite("hsio_axi",
> imx8mp_hsio_axi_sels, base + 0x8380));
> clk_dm(IMX8MP_CLK_MAIN_AXI,
> imx8m_clk_composite_critical("main_axi", imx8mp_main_axi_sels, base +
> 0x8800));
> clk_dm(IMX8MP_CLK_ENET_AXI,
> imx8m_clk_composite_critical("enet_axi", imx8mp_enet_axi_sels, base +
> 0x8880));
> clk_dm(IMX8MP_CLK_NAND_USDHC_BUS,
> imx8m_clk_composite_critical("nand_usdhc_bus",
> imx8mp_nand_usdhc_sels, base + 0x8900));
> @@ -361,6 +376,8 @@ static int imx8mp_clk_probe(struct udevice *dev)
> clk_dm(IMX8MP_CLK_UART2, imx8m_clk_composite("uart2",
> imx8mp_uart2_sels, base + 0xaf80));
> clk_dm(IMX8MP_CLK_UART3, imx8m_clk_composite("uart3",
> imx8mp_uart3_sels, base + 0xb000));
> clk_dm(IMX8MP_CLK_UART4, imx8m_clk_composite("uart4",
> imx8mp_uart4_sels, base + 0xb080));
> + clk_dm(IMX8MP_CLK_USB_CORE_REF,
> imx8m_clk_composite("usb_core_ref", imx8mp_usb_core_ref_sels, base +
> 0xb100));
> + clk_dm(IMX8MP_CLK_USB_PHY_REF,
> imx8m_clk_composite("usb_phy_ref", imx8mp_usb_phy_ref_sels, base +
> 0xb180));
> clk_dm(IMX8MP_CLK_GIC, imx8m_clk_composite_critical("gic",
> imx8mp_gic_sels, base + 0xb200));
>
> clk_dm(IMX8MP_CLK_WDOG, imx8m_clk_composite("wdog",
> imx8mp_wdog_sels, base + 0xb900));
> @@ -389,11 +406,14 @@ static int imx8mp_clk_probe(struct udevice
> *dev)
> clk_dm(IMX8MP_CLK_UART2_ROOT, imx_clk_gate4("uart2_root_clk",
> "uart2", base + 0x44a0, 0));
> clk_dm(IMX8MP_CLK_UART3_ROOT, imx_clk_gate4("uart3_root_clk",
> "uart3", base + 0x44b0, 0));
> clk_dm(IMX8MP_CLK_UART4_ROOT, imx_clk_gate4("uart4_root_clk",
> "uart4", base + 0x44c0, 0));
> + clk_dm(IMX8MP_CLK_USB_ROOT, imx_clk_gate4("usb_root_clk",
> "osc_32k", base + 0x44d0, 0));
> + clk_dm(IMX8MP_CLK_USB_PHY_ROOT,
> imx_clk_gate4("usb_phy_root_clk", "usb_phy_ref", base + 0x44f0, 0));
> clk_dm(IMX8MP_CLK_USDHC1_ROOT,
> imx_clk_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0));
> clk_dm(IMX8MP_CLK_USDHC2_ROOT,
> imx_clk_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0));
> clk_dm(IMX8MP_CLK_WDOG1_ROOT, imx_clk_gate4("wdog1_root_clk",
> "wdog", base + 0x4530, 0));
> clk_dm(IMX8MP_CLK_WDOG2_ROOT, imx_clk_gate4("wdog2_root_clk",
> "wdog", base + 0x4540, 0));
> clk_dm(IMX8MP_CLK_WDOG3_ROOT, imx_clk_gate4("wdog3_root_clk",
> "wdog", base + 0x4550, 0));
> + clk_dm(IMX8MP_CLK_HSIO_ROOT, imx_clk_gate4("hsio_root_clk",
> "ipg_root", base + 0x45c0, 0));
>
> clk_dm(IMX8MP_CLK_USDHC3_ROOT,
> imx_clk_gate4("usdhc3_root_clk", "usdhc3", base + 0x45e0, 0));
>
> --
> 2.35.1
>
More information about the U-Boot
mailing list