[RESEND, RFC 6/8] binman: dtsi: sysfw: j721e: Use binman to package sysfw.itb

[Neha Malcom Francis]

By providing entries in the binman node of the device tree, binman will
be able to find and package board config binary artifacts generated by
TIBoardConfig with sysfw.bin and generate the final image sysfw.itb.

j721e-r5-binman.dtsi has been introduced for R5 specific binman node. It
can be then be include by files that require it like
k3-j721e-r5-common-proc-board-u-boot.dtsi.

Signed-off-by: Tarun Sahu <t-sahu at ti.com>
[n-francis at ti.com: prepared patch for upstreaming]
Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
 arch/arm/dts/j721e-r5-binman.dtsi             | 75 +++++++++++++++++++
 .../k3-j721e-r5-common-proc-board-u-boot.dtsi |  1 +
 board/ti/j721e/Kconfig                        |  1 +
 3 files changed, 77 insertions(+)
 create mode 100644 arch/arm/dts/j721e-r5-binman.dtsi

diff --git a/arch/arm/dts/j721e-r5-binman.dtsi b/arch/arm/dts/j721e-r5-binman.dtsi
new file mode 100644
index 0000000000..6e69084eaa
--- /dev/null
+++ b/arch/arm/dts/j721e-r5-binman.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+
+#include <config.h>
+
+/ {
+	binman: binman {
+		multiple-images;
+	};
+};
+
+&binman {
+	binary {
+		filename = "sysfw.bin";
+		sysfw {
+			filename = "ti-fs-firmware-j721e-gp.bin";
+			device = "j721e";
+			load = <0x0040000>;
+		};
+	};
+	itb {
+		filename = "sysfw.itb";
+		fit {
+			description = "SYSFW and Config Fragments";
+			#address-cells = <1>;
+			images {
+				sysfw.bin {
+					description = "sysfw";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					blob-ext {
+						filename = "sysfw.bin";
+					};
+				};
+				board-cfg.bin {
+					description = "board-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					blob-ext {
+						filename = "board-cfg.bin";
+					};
+				};
+				pm-cfg.bin {
+					description = "pm-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					blob-ext {
+						filename = "pm-cfg.bin";
+					};
+				};
+				rm-cfg.bin {
+					description = "rm-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					blob-ext {
+						filename = "rm-cfg.bin";
+					};
+				};
+				sec-cfg.bin {
+					description = "sec-cfg";
+					type = "firmware";
+					arch = "arm";
+					compression = "none";
+					blob-ext {
+						filename = "sec-cfg.bin";
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
index 48c6ddf672..75fae60a97 100644
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "k3-j721e-common-proc-board-u-boot.dtsi"
+#include "j721e-r5-binman.dtsi"
 
 / {
 	chosen {
diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
index c28752a658..a3a9d504ae 100644
--- a/board/ti/j721e/Kconfig
+++ b/board/ti/j721e/Kconfig
@@ -24,6 +24,7 @@ config TARGET_J721E_R5_EVM
 	select RAM
 	select SPL_RAM
 	select K3_DDRSS
+	select BINMAN
 	imply SYS_K3_SPL_ATF
 	imply TI_I2C_BOARD_DETECT
 
-- 
2.17.1