[PATCH v4 00/11] enable menu-driven boot device selection
Masahisa Kojima
masahisa.kojima at linaro.org
Thu Apr 28 09:35:26 CEST 2022
Hi Heinrich,
On Sat, 16 Apr 2022 at 15:46, Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
>
> On 3/24/22 14:54, Masahisa Kojima wrote:
> > This patch series adds the menu-driven boot device selection,
> > by extending the existing "bootmenu" to include UEFI and distro_boot
> > related entries, and supports menu-driven UEFI boot variable
> > maintenance.
> >
> > This patch series also includes the removable media support
> > that UEFI specification requires to support.
> >
> > The menu example is as follows.
> >
> > *** U-Boot Boot Menu ***
> >
> > bootmenu_00 : Boot 1. kernel
> > bootmenu_01 : Boot 2. kernel
> > bootmenu_02 : Reset board
> > UEFI BOOT0000 : debian
> > UEFI BOOT0001 : ubuntu
> > UEFI BOOT0002 : mmc0:1
> > UEFI BOOT0003 : mmc0:2
> > UEFI BOOT0004 : nvme0:1
> > UEFI BOOT0005 : nvme0:2
> > UEFI BOOT0006 : usb0:2
> > UEFI BOOT0007 : usb1:1
> > UEFI BOOT0008 : usb1:2
> > distro_boot : usb0
> > distro_boot : scsi0
> > distro_boot : virtio0
> > distro_boot : dhcp
> >
> > Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit
> >
> > [Major changes from RFC v3]
> > - add Kconfig option to disable U-Boot console
> > - add UEFI boot variable maintenance feature
> > - support removable media support and user selection
> > - app bootmenu enhancement documentation
> >
> > [How to run on QEMU(arm64)]
> > 1) clone source code
> > $ git clone https://git.linaro.org/people/masahisa.kojima/u-boot.git \
> > -b kojima/bootmenu_v4_upstream_0324 --depth 1
> >
> > 2) prepare U-Boot .config
> > $ make qemu_arm64_menuconfig
> > then, enable CONFIG_CMD_BOOTMENU and CONFIG_AUTOBOOT_MENU_SHOW
> >
> > 3) run on QEMU(arm64) example
> > $ qemu-system-aarch64 -machine virt,gic-version=3 -cpu cortex-a57 -m 4G -nographic \
> > -no-acpi -bios ./u-boot.bin -hda xxx.img
>
>
> I applied the series to origin/master and added the two config options.
>
> This is the output if the disk image does not have an EFI partition:
>
> Found 0 disks
> No EFI system partition
> Unable to find TPMv2 device
>
> Even if there is no EFI system partition on virtio 0 I would expect the
> menu to be shown.
This issue is fixed in the next version.
>
> When having an image with an EFI system partition I get:
>
> *** U-Boot Boot Menu ***
>
> UEFI BOOT0003 : test3
> UEFI BOOT00A0 : hello
> UEFI BOOT0000 : virtio0:1
> distro_boot : usb0
> distro_boot : scsi0
> distro_boot : virtio0
> distro_boot : nvme0
> distro_boot : dhcp
> UEFI Boot Manager Maintenance
> U-Boot console
>
> The entries usb0, scsi0, nvme0 should not exist as there is no such device.
Non-existent devices are filtered out in the next version.
>
> => lsblk
> Block Driver Devices
> -----------------------------
> efi_blk : <none>
> nvme-blk : <none>
> scsi_blk : <none>
> usb_storage_blk : <none>
> virtio-blk : virtio 0
>
>
> When I select "U-Boot console" the prompt is written in the middle of
> the screen. I would expect the screen to be cleared.
>
> If I disable networking, I get
>
> Missing RNG device for EFI_RNG_PROTOCOL
> No EFI system partition
> Unable to find TPMv2 device
> =>
>
> though the disk has an EFI partition.
I fixed the issue that no menu appears if networking is disabled.
But the issue of no EFI system partition found if networking is
disabled seems a fundamental issue of U-Boot, not specific to this
series.
If networking is disabled, "lsblk" also can not find any block device.
o networking disabled
=> lsblk
Block Driver Devices
-----------------------------
efi_blk : <none>
nvme-blk : <none>
scsi_blk : <none>
usb_storage_blk : <none>
virtio-blk : <none>
o networking enabled
=> lsblk
Block Driver Devices
-----------------------------
efi_blk : <none>
nvme-blk : <none>
scsi_blk : <none>
usb_storage_blk : <none>
virtio-blk : virtio 0
Thanks,
Masahisa Kojima
>
> So this series needs some rework.
>
> Best regards
>
> Heinrich
>
> >
> >
> > AKASHI Takahiro (2):
> > efi_loader: export efi_locate_device_handle()
> > efi_loader: bootmgr: add booting from removable media
> >
> > Masahisa Kojima (9):
> > bootmenu: fix menu API error handling
> > lib/charset: add u16_strlcat() function
> > test: unit test for u16_strlcat()
> > menu: always show the menu regardless of the number or entry
> > bootmenu: add UEFI and disto_boot entries
> > bootmenu: factor out the user input handling
> > efi_loader: add menu-driven UEFI Boot Variable maintenance
> > bootmenu: add removable media entries
> > doc:bootmenu: add UEFI boot variable and distro boot support
> >
> > cmd/Kconfig | 10 +
> > cmd/bootmenu.c | 678 +++++++----
> > common/menu.c | 139 ++-
> > doc/usage/bootmenu.rst | 65 ++
> > include/charset.h | 15 +
> > include/config_distro_bootcmd.h | 14 +-
> > include/efi_default_filename.h | 26 +
> > include/efi_loader.h | 63 ++
> > include/menu.h | 20 +
> > lib/charset.c | 21 +
> > lib/efi_loader/Makefile | 1 +
> > lib/efi_loader/efi_bootmenu_maintenance.c | 1244 +++++++++++++++++++++
> > lib/efi_loader/efi_bootmgr.c | 50 +-
> > lib/efi_loader/efi_boottime.c | 59 +-
> > lib/efi_loader/efi_console.c | 81 ++
> > lib/efi_loader/efi_disk.c | 11 +
> > lib/efi_loader/efi_file.c | 75 +-
> > test/unicode_ut.c | 45 +
> > 18 files changed, 2357 insertions(+), 260 deletions(-)
> > create mode 100644 include/efi_default_filename.h
> > create mode 100644 lib/efi_loader/efi_bootmenu_maintenance.c
> >
>
More information about the U-Boot
mailing list