[PATCH 4/4] mmc: sandbox: Set the response

[Jaehoon Chung]

On 3/31/22 01:54, Sean Anderson wrote:
> The mmc subsystem checks the response, but we (almost) never set it. Add a
> bare-bones implementation. Technically, we are supposed to return our
> current state in our responses, but I don't think the subsystem checks it.
> 
> Signed-off-by: Sean Anderson <seanga2 at gmail.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung


> ---
> 
>  drivers/mmc/sandbox_mmc.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/sandbox_mmc.c b/drivers/mmc/sandbox_mmc.c
> index 60a6be0add..8922eeba2a 100644
> --- a/drivers/mmc/sandbox_mmc.c
> +++ b/drivers/mmc/sandbox_mmc.c
> @@ -44,6 +44,9 @@ static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
>  	struct mmc *mmc = mmc_get_mmc_dev(dev);
>  	static ulong erase_start, erase_end;
>  
> +	/* Default R1 response */
> +	cmd->response[0] = R1_READY_FOR_DATA;
> +
>  	switch (cmd->cmdidx) {
>  	case MMC_CMD_ALL_SEND_CID:
>  		memset(cmd->response, '\0', sizeof(cmd->response));
> @@ -55,8 +58,8 @@ static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
>  	case SD_CMD_SEND_IF_COND:
>  		cmd->response[0] = 0xaa;
>  		break;
> -	case MMC_CMD_SEND_STATUS:
> -		cmd->response[0] = MMC_STATUS_RDY_FOR_DATA;
> +	case SD_CMD_APP_SD_STATUS:
> +		cmd->response[0] |= R1_APP_CMD;
>  		memset(data->dest, '\0', data->blocks * data->blocksize);
>  		break;
>  	case MMC_CMD_SELECT_CARD:
> @@ -106,6 +109,7 @@ static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
>  		cmd->response[2] = 0;
>  		break;
>  	case MMC_CMD_APP_CMD:
> +		cmd->response[0] |= R1_APP_CMD;
>  		break;
>  	case MMC_CMD_SET_BLOCKLEN:
>  		debug("block len %d\n", cmd->cmdarg);
> @@ -113,11 +117,13 @@ static int sandbox_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
>  	case SD_CMD_APP_SEND_SCR: {
>  		u32 *scr = (u32 *)data->dest;
>  
> +		cmd->response[0] |= R1_APP_CMD;
>  		scr[0] = cpu_to_be32(2 << 24 | 1 << 15);  /* SD version 3 */
>  		break;
>  	}
>  	default:
>  		debug("%s: Unknown command %d\n", __func__, cmd->cmdidx);
> +		cmd->response[0] |= R1_ILLEGAL_COMMAND;
>  		break;
>  	}
>