[PATCH u-boot-marvell 6/8] arm: mvebu: turris_omnia: Extract code for disabling sata/pcie

Pali Rohár pali at kernel.org
Fri Apr 22 11:20:55 CEST 2022


On Wednesday 02 March 2022 13:38:48 Marek Behún wrote:
> On Wed,  2 Mar 2022 12:47:56 +0100
> Pali Rohár <pali at kernel.org> wrote:
> 
> > Move code for disabling sata and pcie DT nodes to own functions, so this
> > code can be called from other places in follow up patches.
> > 
> > Signed-off-by: Pali Rohár <pali at kernel.org>
> > ---
> >  board/CZ.NIC/turris_omnia/turris_omnia.c | 96 +++++++++++++-----------
> >  1 file changed, 52 insertions(+), 44 deletions(-)
> > 
> > diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
> > index 6a057ea7dd70..57b797db4a8e 100644
> > --- a/board/CZ.NIC/turris_omnia/turris_omnia.c
> > +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
> > @@ -518,11 +518,54 @@ void spl_board_init(void)
> >  
> >  #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP) || IS_ENABLED(CONFIG_OF_BOARD_SETUP)
> >  
> > -static void fixup_serdes_0_nodes(void *blob)
> > +static void disable_sata_node(void *blob)
> >  {
> > -	bool mode_sata;
> >  	int node;
> >  
> > +	fdt_for_each_node_by_compatible(node, blob, -1, "marvell,armada-380-ahci") {
> > +		if (!fdtdec_get_is_enabled(blob, node))
> > +			continue;
> > +
> > +		if (fdt_status_disabled(blob, node) < 0)
> > +			printf("Cannot disable SATA DT node!\n");
> > +		else
> > +			debug("Disabled SATA DT node\n");
> > +
> > +		break;
> > +	}
> > +}
> > +
> > +static void disable_pcie_node(void *blob, int port)
> > +{
> > +	int node;
> > +
> > +	fdt_for_each_node_by_compatible(node, blob, -1, "marvell,armada-370-pcie") {
> > +		int port_node;
> > +
> > +		if (!fdtdec_get_is_enabled(blob, node))
> > +			continue;
> > +
> > +		fdt_for_each_subnode (port_node, blob, node) {
> > +			if (!fdtdec_get_is_enabled(blob, port_node))
> > +				continue;
> > +
> > +			if (fdtdec_get_int(blob, port_node, "marvell,pcie-port", -1) != port)
> > +				continue;
> > +
> > +			if (fdt_status_disabled(blob, port_node) < 0)
> > +				printf("Cannot disable PCIe port %d DT node!\n", port);
> > +			else
> > +				debug("Disabled PCIe port %d DT node\n", port);
> > +
> > +			return;
> > +		}
> > +	}
> > +}
> > +
> > +static void fixup_msata_port_nodes(void *blob)
> > +{
> > +	bool mode_sata;
> > +
> >  	/*
> >  	 * Determine if SerDes 0 is configured to SATA mode.
> >  	 * We do this instead of calling omnia_detect_sata() to avoid another
> > @@ -541,47 +584,12 @@ static void fixup_serdes_0_nodes(void *blob)
> >  		return;
> >  	}
> >  
> > -	/* If mSATA card is not present, disable SATA DT node */
> >  	if (!mode_sata) {
> > -		fdt_for_each_node_by_compatible(node, blob, -1,
> > -						"marvell,armada-380-ahci") {
> > -			if (!fdtdec_get_is_enabled(blob, node))
> > -				continue;
> > -
> > -			if (fdt_status_disabled(blob, node) < 0)
> > -				printf("Cannot disable SATA DT node!\n");
> > -			else
> > -				debug("Disabled SATA DT node\n");
> > -
> > -			break;
> > -		}
> > -
> > -		return;
> > -	}
> > -
> > -	/* Otherwise disable PCIe port 0 DT node (MiniPCIe / mSATA port) */
> > -	fdt_for_each_node_by_compatible(node, blob, -1,
> > -					"marvell,armada-370-pcie") {
> > -		int port;
> > -
> > -		if (!fdtdec_get_is_enabled(blob, node))
> > -			continue;
> > -
> > -		fdt_for_each_subnode (port, blob, node) {
> > -			if (!fdtdec_get_is_enabled(blob, port))
> > -				continue;
> > -
> > -			if (fdtdec_get_int(blob, port, "marvell,pcie-port",
> > -					   -1) != 0)
> > -				continue;
> > -
> > -			if (fdt_status_disabled(blob, port) < 0)
> > -				printf("Cannot disable PCIe port 0 DT node!\n");
> > -			else
> > -				debug("Disabled PCIe port 0 DT node\n");
> > -
> > -			return;
> > -		}
> > +		/* If mSATA card is not present, disable SATA DT node */
> > +		disable_sata_node(blob);
> > +	} else {
> > +		/* Otherwise disable PCIe port 0 DT node (MiniPCIe / mSATA port) */
> > +		disable_pcie_node(blob, 0);
> >  	}
> 
> If I am looking at this correctly, there is only one statement both in
> if and in else clause. Can we drop the {} parentheses?
> 
> Marek

Due to comment above which belongs to the code, I put there {} parentheses.


More information about the U-Boot mailing list