[PATCH 12/12] ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1

Samuel Holland samuel at sholland.org
Wed Apr 27 22:31:31 CEST 2022 

Copy the devicetree source for the H6 SoC and all existing boards
from the Linux v5.18-rc1 tag.

To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 189bef235dd3 and 73088dfee635.

This commit also adds the following new board devicetrees:
 - sun50i-h6-pine-h64-model-b.dts
 - sun50i-h6-tanix-tx6-mini.dts

This update should not impact any existing U-Boot functionality.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

 arch/arm/dts/Makefile                       |   4 +-
 arch/arm/dts/sun50i-h6-beelink-gs1.dts      |  38 ++--
 arch/arm/dts/sun50i-h6-cpu-opp.dtsi         |   2 +-
 arch/arm/dts/sun50i-h6-orangepi-3.dts       |  14 +-
 arch/arm/dts/sun50i-h6-orangepi.dtsi        |  22 +--
 arch/arm/dts/sun50i-h6-pine-h64-model-b.dts |  51 ++++++
 arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts   |  15 ++
 arch/arm/dts/sun50i-h6-tanix-tx6.dts        | 115 ++----------
 arch/arm/dts/sun50i-h6-tanix.dtsi           | 189 ++++++++++++++++++++
 arch/arm/dts/sun50i-h6.dtsi                 |  26 ++-
 10 files changed, 328 insertions(+), 148 deletions(-)
 create mode 100644 arch/arm/dts/sun50i-h6-pine-h64-model-b.dts
 create mode 100644 arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts
 create mode 100644 arch/arm/dts/sun50i-h6-tanix.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 95909ef037..85e731aec9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -695,7 +695,9 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
 	sun50i-h6-orangepi-lite2.dtb \
 	sun50i-h6-orangepi-one-plus.dtb \
 	sun50i-h6-pine-h64.dtb \
-	sun50i-h6-tanix-tx6.dtb
+	sun50i-h6-pine-h64-model-b.dtb \
+	sun50i-h6-tanix-tx6.dtb \
+	sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_MACH_SUN50I_H616) += \
 	sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index b5808047d6..649b146dff 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -150,12 +150,28 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_i2c {
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&r_rsb {
 	status = "okay";
 
-	axp805: pmic at 36 {
+	axp805: pmic at 745 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x36>;
+		reg = <0x745>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -273,22 +289,6 @@
 	};
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * PL0 and PL1 are used for PMIC I2C
-	 * don't enable the pl-supply else
-	 * it will fail at boot
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
 &spdif {
 	status = "okay";
 };
diff --git a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
index 8c6e8536b6..0baf0f8e4d 100644
--- a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
+++ b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi
@@ -3,7 +3,7 @@
 // Copyright (C) 2020 Clément Péron <peron.clem at gmail.com>
 
 / {
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "allwinner,sun50i-h6-operating-points";
 		nvmem-cells = <&cpu_speed_grade>;
 		opp-shared;
diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-orangepi-3.dts
index 7e83f6146f..9f12c05e21 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-3.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts
@@ -175,12 +175,16 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_i2c {
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
 	status = "okay";
 
-	axp805: pmic at 36 {
+	axp805: pmic at 745 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x36>;
+		reg = <0x745>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -291,10 +295,6 @@
 	};
 };
 
-&r_ir {
-	status = "okay";
-};
-
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index da0875bd38..a5811d55bb 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -112,12 +112,20 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_i2c {
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
+&r_rsb {
 	status = "okay";
 
-	axp805: pmic at 36 {
+	axp805: pmic at 745 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x36>;
+		reg = <0x745>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -232,14 +240,6 @@
 	};
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
 &rtc {
 	clocks = <&ext_osc32k>;
 };
diff --git a/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts
new file mode 100644
index 0000000000..686f58e770
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe at baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+	model = "Pine H64 model B";
+	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
+
+	/delete-node/ reg_gmac_3v3;
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&hdmi_connector {
+	/delete-property/ ddc-en-gpios;
+};
+
+&emac {
+	phy-supply = <&reg_aldo2>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
diff --git a/arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts b/arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts
new file mode 100644
index 0000000000..08d84160d8
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2021 Jernej Skrabec <jernej.skrabec at gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6-tanix.dtsi"
+
+/ {
+	model = "Tanix TX6 mini";
+	compatible = "oranth,tanix-tx6-mini", "allwinner,sun50i-h6";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
diff --git a/arch/arm/dts/sun50i-h6-tanix-tx6.dts b/arch/arm/dts/sun50i-h6-tanix-tx6.dts
index be81330db1..9a38ff9b3f 100644
--- a/arch/arm/dts/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm/dts/sun50i-h6-tanix-tx6.dts
@@ -3,122 +3,27 @@
 
 /dts-v1/;
 
-#include "sun50i-h6.dtsi"
-#include "sun50i-h6-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "sun50i-h6-tanix.dtsi"
 
 / {
 	model = "Tanix TX6";
 	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	connector {
-		compatible = "hdmi-connector";
-		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_vdd_cpu_gpu: vdd-cpu-gpu {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-cpu-gpu";
-		regulator-min-microvolt = <1135000>;
-		regulator-max-microvolt = <1135000>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_vdd_cpu_gpu>;
-};
-
-&de {
-	status = "okay";
-};
-
-&dwc3 {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci3 {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&reg_vdd_cpu_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
 };
 
 &r_ir {
 	linux,rc-map-name = "rc-tanix-tx5max";
-	status = "okay";
 };
 
-&uart0 {
+&uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ph_pins>;
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
 	status = "okay";
-};
 
-&usb2otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb2phy {
-	status = "okay";
-};
-
-&usb3phy {
-	status = "okay";
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+	};
 };
diff --git a/arch/arm/dts/sun50i-h6-tanix.dtsi b/arch/arm/dts/sun50i-h6-tanix.dtsi
new file mode 100644
index 0000000000..edb71e4a03
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-tanix.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec at siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/* used for FD650 LED display driver */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+		scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+		i2c-gpio,delay-us = <5>;
+	};
+
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_vcc1v8>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc1v8>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index af8b7d0ef7..71a45a624d 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -119,10 +119,10 @@
 			display_clocks: clock at 0 {
 				compatible = "allwinner,sun50i-h6-de3-clk";
 				reg = <0x0 0x10000>;
-				clocks = <&ccu CLK_DE>,
-					 <&ccu CLK_BUS_DE>;
-				clock-names = "mod",
-					      "bus";
+				clocks = <&ccu CLK_BUS_DE>,
+					 <&ccu CLK_DE>;
+				clock-names = "bus",
+					      "mod";
 				resets = <&ccu RST_BUS_DE>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
@@ -153,6 +153,15 @@
 			};
 		};
 
+		video-codec-g2 at 1c00000 {
+			compatible = "allwinner,sun50i-h6-vpu-g2";
+			reg = <0x01c00000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_VP9>;
+		};
+
 		video-codec at 1c0e000 {
 			compatible = "allwinner,sun50i-h6-video-engine";
 			reg = <0x01c0e000 0x2000>;
@@ -271,6 +280,15 @@
 			};
 		};
 
+		timer at 3009000 {
+			compatible = "allwinner,sun50i-h6-timer",
+				     "allwinner,sun8i-a23-timer";
+			reg = <0x03009000 0xa0>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
 		watchdog: watchdog at 30090a0 {
 			compatible = "allwinner,sun50i-h6-wdt",
 				     "allwinner,sun6i-a31-wdt";
-- 
2.35.1

More information about the U-Boot mailing list