[PATCH v3 1/4] arm: mvebu: dts: uDPU: update DTS

Stefan Roese sr at denx.de
Thu Apr 21 16:04:56 CEST 2022


On 3/24/22 10:57, Robert Marko wrote:
> Update the uDPU DTS to the version that is pending upstream [1][2].
> 
> [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1107016-1-robert.marko@sartura.hr/
> [2] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220322105857.1107016-2-robert.marko@sartura.hr/
> 
> Signed-off-by: Robert Marko <robert.marko at sartura.hr>

Applied to u-boot-marvell/master

Thanks,
Stefan
> ---
>   arch/arm/dts/armada-3720-uDPU.dts | 21 +++++++++++++--------
>   1 file changed, 13 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-3720-uDPU.dts b/arch/arm/dts/armada-3720-uDPU.dts
> index 95d46e8d08..1f534c0c65 100644
> --- a/arch/arm/dts/armada-3720-uDPU.dts
> +++ b/arch/arm/dts/armada-3720-uDPU.dts
> @@ -99,7 +99,7 @@
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&spi_quad_pins>;
>   
> -	m25p80 at 0 {
> +	spi-flash at 0 {
>   		compatible = "jedec,spi-nor";
>   		reg = <0>;
>   		spi-max-frequency = <54000000>;
> @@ -108,10 +108,15 @@
>   			compatible = "fixed-partitions";
>   			#address-cells = <1>;
>   			#size-cells = <1>;
> -			/* only bootloader is located on the SPI */
> +
>   			partition at 0 {
> -				label = "uboot";
> -				reg = <0 0x400000>;
> +				label = "firmware";
> +				reg = <0x0 0x180000>;
> +			};
> +
> +			partition at 180000 {
> +				label = "u-boot-env";
> +				reg = <0x180000 0x10000>;
>   			};
>   		};
>   	};
> @@ -148,15 +153,15 @@
>   	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>   	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>   
> -	lm75 at 48 {
> +	nct375 at 48 {
>   		status = "okay";
> -		compatible = "lm75";
> +		compatible = "ti,tmp75c";
>   		reg = <0x48>;
>   	};
>   
> -	lm75 at 49 {
> +	nct375 at 49 {
>   		status = "okay";
> -		compatible = "lm75";
> +		compatible = "ti,tmp75c";
>   		reg = <0x49>;
>   	};
>   };

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list