[PATCH] arm: imx8m: Enable CLK_IMX8M[MNQP] where applicable

Adam Ford aford173 at gmail.com
Mon Apr 18 00:16:47 CEST 2022


Most, if not all of the imx8m[mnp] boards enable the SoC clock
driver.  The CLK_IMX8MQ isn't necessarily required yet, but as
the new power domain driver will assume it is present.  To simply
this, enable the respective clock drivers when a given imx8m SoC
is selected.  This will also shink the board defconfig files a bit.

Suggested-by: Marek Vasut <marex at denx.de>
Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 55db25062a..4b0d126a71 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -8,18 +8,22 @@ config IMX8M
 config IMX8MQ
 	bool
 	select IMX8M
+	select CLK_IMX8MQ
 
 config IMX8MM
 	bool
 	select IMX8M
+	select CLK_IMX8MM
 
 config IMX8MN
 	bool
 	select IMX8M
+	select CLK_IMX8MN
 
 config IMX8MP
 	bool
 	select IMX8M
+	select CLK_IMX8MP
 
 config SYS_SOC
 	default "imx8m"
-- 
2.34.1



More information about the U-Boot mailing list