[PATCH V2 0/4] imx: imx8m: enable DM SERIAL

Peng Fan (OSS) peng.fan at oss.nxp.com
Tue Apr 12 06:14:14 CEST 2022


From: Peng Fan <peng.fan at nxp.com>

V2:
 Include imx8mq-evk in this patchset.
 For i.MX8MN/M/P, drop board level uart pinmux settings,
 move preloader_console_init after driver probe.

 Tested on all four boards. Note i.MX8MQ-EVK not have SPL_DM, so pinmux for
 uart still there for spl usage.

Peng Fan (4):
  imx: imx8mp_evk: enable CONFIG_DM_SERIAL
  imx: imx8mm_evk: enable CONFIG_DM_SERIAL
  imx: imx8mn_evk: enable CONFIG_DM_SERIAL
  imx: imx8mq-evk: enable CONFIG_DM_SERIAL

 arch/arm/dts/imx8mq-evk-u-boot.dtsi     | 32 +++++++++++++++++++++++++
 board/freescale/imx8mm_evk/spl.c        | 12 ++--------
 board/freescale/imx8mn_evk/spl.c        | 12 ++--------
 board/freescale/imx8mp_evk/imx8mp_evk.c |  8 -------
 configs/imx8mm_evk_defconfig            |  4 ++--
 configs/imx8mn_ddr4_evk_defconfig       |  4 ++--
 configs/imx8mn_evk_defconfig            |  4 ++--
 configs/imx8mp_evk_defconfig            |  4 ++--
 configs/imx8mq_evk_defconfig            |  3 ++-
 9 files changed, 46 insertions(+), 37 deletions(-)

-- 
2.35.1



More information about the U-Boot mailing list