[PATCH v5 13/13] rockchip: serial: Kconfig: allow ROCKCHIP_SERIAL enabled in TPL

[Johan Jonker]

The serial_rockchip.c driver converts platdata to the data structure
used in the ns16550.c file and then calls the function
ns16550_serial_probe().
When compiled with OF_REAL the serial_rockchip.c driver returns
now -ENODEV when probed and does no harm.
The config ROCKCHIP_SERIAL is currently depends on SPL_OF_PLATDATA.
Allow serial port use for both SPL and TPL by removing this
dependency and SPL_BUILD restriction.

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 drivers/serial/Kconfig  | 4 ++--
 drivers/serial/Makefile | 2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 06a69e78de..9bf83b29ca 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -762,11 +762,11 @@ config PL01X_SERIAL
 
 config ROCKCHIP_SERIAL
 	bool "Rockchip on-chip UART support"
-	depends on DM_SERIAL && SPL_OF_PLATDATA
+	depends on DM_SERIAL
 	select SYS_NS16550
 	help
 	  Select this to enable a debug UART for Rockchip devices when using
-	  CONFIG_SPL_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).
+	  OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).
 	  This uses the ns16550 driver, converting the platdata from of-platdata
 	  to the ns16550 format.
 
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index b68b5e7b2b..d8e26d72ea 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -46,9 +46,7 @@ obj-$(CONFIG_MXC_UART) += serial_mxc.o
 obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
 obj-$(CONFIG_MESON_SERIAL) += serial_meson.o
 obj-$(CONFIG_INTEL_MID_SERIAL) += serial_intel_mid.o
-ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
-endif
 obj-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 obj-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
 obj-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
-- 
2.20.1