[PATCH v2 2/2] imx8mn/8mp: Allow booting via USB
Marek Vasut
marex at denx.de
Thu Apr 21 19:26:08 CEST 2022
On 4/21/22 19:24, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
>
> When trying to boot via USB on i.MX8MN it is necessary to specify
> the U-Boot environment location, otherwise the boot process simply
> hangs.
>
> Specify the environment location when booting from USB.
>
> Tested on a imx8mn-evk.
>
> Suggested-by: Michael Nazzareno Trimarchi <michael at amarulasolutions.com>
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
> Changes since v1:
> - Handle the env selection for the USB_BOOT case (Michael).
>
> arch/arm/mach-imx/imx8m/soc.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
> index 7059d87e336b..34f8475bca46 100644
> --- a/arch/arm/mach-imx/imx8m/soc.c
> +++ b/arch/arm/mach-imx/imx8m/soc.c
> @@ -1536,6 +1536,14 @@ enum env_location arch_env_get_location(enum env_operation op, int prio)
> return ENVL_UNKNOWN;
>
> switch (dev) {
> + case USB_BOOT:
> + if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
> + return ENVL_SPI_FLASH;
> + if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
> + return ENVL_NAND;
> + if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC))
> + return ENVL_MMC;
> + return ENVL_NOWHERE;
Shouldn't this last entry also be
if (IS_ENABLED(CONFIG_ENV_IS_NOWHERE))
return ENVL_NOWHERE;
?
More information about the U-Boot
mailing list