[PATCH] arm: dts: stm32mp15: alignment with v5.18
Patrick Delaunay
patrick.delaunay at foss.st.com
Tue Apr 26 15:38:05 CEST 2022
Device tree alignment with Linux kernel v5.18-rc2:
- ARM: dts: stm32: Add support for the emtrion emSBC-Argon
(only the pincontrol part)
- ARM: dts: stm32: Drop duplicate status okay from DHCOM gpioc node
- ARM: dts: stm32: add st,stm32-sdmmc2 compatible on stm32mp151
- ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
- ARM: dts: stm32: use exti 19 as main interrupt to support RTC wakeup on
stm32mp157
- ARM: dts: stm32: add DMA configuration to UART nodes on stm32mp151
- ARM: dts: stm32: keep uart4 behavior on *
- ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15
Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---
arch/arm/dts/stm32mp15-pinctrl.dtsi | 92 +++++++++++++++++++
arch/arm/dts/stm32mp15-u-boot.dtsi | 12 ---
arch/arm/dts/stm32mp151.dtsi | 37 ++++++--
arch/arm/dts/stm32mp153.dtsi | 7 ++
.../stm32mp157a-icore-stm32mp1-ctouch2.dts | 2 +
.../stm32mp157a-icore-stm32mp1-edimm2.2.dts | 2 +
...157a-microgea-stm32mp1-microdev2.0-of7.dts | 4 +
...32mp157a-microgea-stm32mp1-microdev2.0.dts | 4 +
arch/arm/dts/stm32mp157c-ed1.dts | 2 +
arch/arm/dts/stm32mp157c-odyssey.dts | 2 +
arch/arm/dts/stm32mp15xx-dhcom-drc02.dtsi | 4 +
arch/arm/dts/stm32mp15xx-dhcom-pdk2.dtsi | 4 +
arch/arm/dts/stm32mp15xx-dhcom-picoitx.dtsi | 4 +
arch/arm/dts/stm32mp15xx-dhcom-som.dtsi | 3 +-
arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtsi | 6 ++
arch/arm/dts/stm32mp15xx-dkx.dtsi | 4 +
16 files changed, 168 insertions(+), 21 deletions(-)
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index 6161f5906e..f0d66d8c6e 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -338,6 +338,47 @@
};
};
+ ethernet0_rmii_pins_b: rmii-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
+ <STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
+ <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
+ bias-disable;
+ };
+ pins4 {
+ pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
+ };
+ };
+
+ ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+ <STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
+ <STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
+ };
+ };
+
fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -927,6 +968,21 @@
};
};
+ pwm1_pins_b: pwm1-1 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_b: pwm1-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
+ };
+ };
+
pwm2_pins_a: pwm2-0 {
pins {
pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -2042,6 +2098,42 @@
};
};
+ usart3_pins_d: usart3-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
+ <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_idle_pins_d: usart3-idle-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_sleep_pins_d: usart3-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+ <STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
+ };
+ };
+
usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi b/arch/arm/dts/stm32mp15-u-boot.dtsi
index e23d6c7d7e..d9d04743ac 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -188,18 +188,6 @@
#size-cells = <0>;
};
-&sdmmc1 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-};
-
-&sdmmc2 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-};
-
-&sdmmc3 {
- compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
-};
-
&usart1 {
resets = <&rcc USART1_R>;
};
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 5a2be00758..e74a5faf4a 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -63,10 +63,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&intc>;
};
@@ -473,6 +473,9 @@
interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART2_K>;
wakeup-source;
+ dmas = <&dmamux1 43 0x400 0x15>,
+ <&dmamux1 44 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -482,6 +485,9 @@
interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART3_K>;
wakeup-source;
+ dmas = <&dmamux1 45 0x400 0x15>,
+ <&dmamux1 46 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -491,6 +497,9 @@
interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART4_K>;
wakeup-source;
+ dmas = <&dmamux1 63 0x400 0x15>,
+ <&dmamux1 64 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -500,6 +509,9 @@
interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART5_K>;
wakeup-source;
+ dmas = <&dmamux1 65 0x400 0x15>,
+ <&dmamux1 66 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -606,6 +618,9 @@
interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART7_K>;
wakeup-source;
+ dmas = <&dmamux1 79 0x400 0x15>,
+ <&dmamux1 80 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -615,6 +630,9 @@
interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc UART8_K>;
wakeup-source;
+ dmas = <&dmamux1 81 0x400 0x15>,
+ <&dmamux1 82 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -696,6 +714,9 @@
interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc USART6_K>;
wakeup-source;
+ dmas = <&dmamux1 71 0x400 0x15>,
+ <&dmamux1 72 0x400 0x11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -1077,7 +1098,7 @@
};
sdmmc3: mmc at 48004000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x48004000 0x400>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
@@ -1411,7 +1432,7 @@
};
sdmmc1: mmc at 58005000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58005000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
@@ -1426,7 +1447,7 @@
};
sdmmc2: mmc at 58007000 {
- compatible = "arm,pl18x", "arm,primecell";
+ compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58007000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -1590,7 +1611,7 @@
reg = <0x5c004000 0x400>;
clocks = <&rcc RTCAPB>, <&rcc RTC>;
clock-names = "pclk", "rtc_ck";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
diff --git a/arch/arm/dts/stm32mp153.dtsi b/arch/arm/dts/stm32mp153.dtsi
index 1c1889b194..486084e0b8 100644
--- a/arch/arm/dts/stm32mp153.dtsi
+++ b/arch/arm/dts/stm32mp153.dtsi
@@ -22,6 +22,13 @@
interrupt-affinity = <&cpu0>, <&cpu1>;
};
+ timer {
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
soc {
m_can1: can at 4400e000 {
compatible = "bosch,m_can";
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
index d3058a036c..1f75f1d451 100644
--- a/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -43,5 +43,7 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index ec9f1d1cd5..3a1295cfa9 100644
--- a/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/arch/arm/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -43,5 +43,7 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 5670b23812..fae656edd8 100644
--- a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -143,6 +143,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -150,5 +152,7 @@
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
index 7a75868164..b9d0d3d6ad 100644
--- a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -44,6 +44,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -51,5 +53,7 @@
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index f62b46b8dd..fe5c8f25ce 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -392,6 +392,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts
index 0e725498dd..17bcf56f74 100644
--- a/arch/arm/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/dts/stm32mp157c-odyssey.dts
@@ -132,6 +132,8 @@
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dtsi
index 4b10b013ff..35b1034aa3 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -131,6 +131,8 @@
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -144,6 +146,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a>;
rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dtsi
index fbf3826933..5f586f0240 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -287,6 +287,8 @@
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -294,6 +296,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
uart-has-rtscts;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dtsi
index ba816ef8b9..abc595350e 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -105,12 +105,16 @@
&usart3 {
pinctrl-names = "default";
pinctrl-0 = <&usart3_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
&uart8 {
pinctrl-names = "default";
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
index 8c41f819f7..83e2c87713 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
@@ -196,7 +196,6 @@
"", "", "DHCOM-E", "",
"", "", "", "",
"", "", "", "";
- status = "okay";
};
&gpiod {
@@ -521,5 +520,7 @@
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 6885948f30..61e17f44ce 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -376,6 +376,8 @@
label = "LS-UART1";
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_b>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -385,6 +387,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_a>;
uart-has-rtscts;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -394,6 +398,8 @@
pinctrl-0 = <&usart2_pins_a>;
pinctrl-1 = <&usart2_sleep_pins_a>;
st,hw-flow-ctrl;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
bluetooth {
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index f8130bf445..3d36cac9ed 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -658,6 +658,8 @@
pinctrl-0 = <&uart4_pins_a>;
pinctrl-1 = <&uart4_sleep_pins_a>;
pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};
@@ -666,6 +668,8 @@
pinctrl-0 = <&uart7_pins_c>;
pinctrl-1 = <&uart7_sleep_pins_c>;
pinctrl-2 = <&uart7_idle_pins_c>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "disabled";
};
--
2.25.1
More information about the U-Boot
mailing list