[PATCH 0/2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector

[Pali Rohár]

With this patch series, U-Boot binary u-boot.bin (or u-boot-with-spl.bin
when SPL is used) for QorIQ pre-PBL platforms can be directly copied to
SD card without need to process binary via external formatting tools.

Tested on P2020 based board with SPL booting and also direct U-Boot
booting without SPL.

Depends on other powerpc mpc85xx patches:
http://patchwork.ozlabs.org/project/uboot/list/?series=293592&state=*

When using SPL, also following mmc fsl_esdhc_spl patches are required:
http://patchwork.ozlabs.org/project/uboot/list/?series=293276&state=*

And when using SPL and u-boot-with-spl.bin is stored on non-zero sector
then also following patch is required:
http://patchwork.ozlabs.org/project/uboot/patch/20220404163311.5853-1-pali@kernel.org/

Pali Rohár (2):
  powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot
    sector
  board: freescale: p1_p2_rdb_pc: Calculate offsets for eSDHC boot
    sector

 arch/powerpc/cpu/mpc85xx/Kconfig        | 53 +++++++++++++++
 arch/powerpc/cpu/mpc85xx/start.S        | 86 +++++++++++++++++++++++++
 arch/powerpc/cpu/mpc85xx/u-boot-spl.lds |  5 ++
 arch/powerpc/cpu/mpc85xx/u-boot.lds     |  5 ++
 include/configs/p1_p2_rdb_pc.h          |  7 +-
 5 files changed, 155 insertions(+), 1 deletion(-)

-- 
2.20.1