[PATCH] ARM: imx: romapi: Repair FlexSPI NOR boot offset

[sbabic at denx.de]

> The FlexSPI NOR boot offset does not require any special handling,
> the image_offset is correct in either case (0x1000 for FlexSPI NOR
> and 0x8000 for SD/eMMC) and the offset of u-boot.itb from the start
> of flash.bin is always 0x58000 on MX8MN/MX8MP, which matches the
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000 in case
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300, which is always the
> case on MX8MN/MX8MP.
> The CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR is really overloaded in
> case of the MX8MN/MX8MP, but fixing that needs additional plumbing.
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Fabio Estevam <festevam at denx.de>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================