[PATCH 01/31] arm: mediatek: add support for MediaTek MT7986 SoC
Daniel Golle
daniel at makrotopia.org
Thu Aug 4 10:37:56 CEST 2022
Hi Weijie,
happy to see this series posted!
Trying to apply it unfortunately fails due to errornous line-breaks,
supposedly inserted by your MUA, see below.
I didn't go beyond the first patch and it'd be nice if you report the
whole series without the wrong line-breaks.
Cheers
Daniel
On Thu, Aug 04, 2022 at 11:34:28AM +0800, Weijie Gao wrote:
> This patch adds basic support for MediaTek MT7986 SoC.
> This include the file that will initialize the SoC after boot and its
> device tree.
>
> Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
> ---
> arch/arm/dts/mt7986-u-boot.dtsi | 33 ++
> arch/arm/dts/mt7986.dtsi | 341 ++++++++++++++++++
> arch/arm/mach-mediatek/Kconfig | 11 +
> arch/arm/mach-mediatek/Makefile | 1 +
> arch/arm/mach-mediatek/mt7986/Makefile | 4 +
> arch/arm/mach-mediatek/mt7986/init.c | 53 +++
> arch/arm/mach-mediatek/mt7986/lowlevel_init.S | 30 ++
> 7 files changed, 473 insertions(+)
> create mode 100644 arch/arm/dts/mt7986-u-boot.dtsi
> create mode 100644 arch/arm/dts/mt7986.dtsi
> create mode 100644 arch/arm/mach-mediatek/mt7986/Makefile
> create mode 100644 arch/arm/mach-mediatek/mt7986/init.c
> create mode 100644 arch/arm/mach-mediatek/mt7986/lowlevel_init.S
>
> diff --git a/arch/arm/dts/mt7986-u-boot.dtsi
> b/arch/arm/dts/mt7986-u-boot.dtsi
The above two lines should be a single line.
> new file mode 100644
> index 0000000000..95671f8afa
> --- /dev/null
> +++ b/arch/arm/dts/mt7986-u-boot.dtsi
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + * Author: Sam Shih <sam.shih at mediatek.com>
> + */
> +
> +&topckgen {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&pericfg {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&apmixedsys {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&timer0 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&uart0 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&snand {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&pinctrl {
> + u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/mt7986.dtsi b/arch/arm/dts/mt7986.dtsi
> new file mode 100644
> index 0000000000..f235bd8b8c
> --- /dev/null
> +++ b/arch/arm/dts/mt7986.dtsi
> @@ -0,0 +1,341 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + * Author: Sam Shih <sam.shih at mediatek.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/clock/mt7986-clk.h>
> +#include <dt-bindings/reset/mt7629-reset.h>
> +#include <dt-bindings/pinctrl/mt65xx.h>
> +
> +/ {
> + compatible = "mediatek,mt7986";
> + interrupt-parent = <&gic>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + config {
> + u-boot,mmc-env-partition = "u-boot-env";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + };
> + cpu1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + };
> + cpu2: cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + };
> + cpu3: cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + };
> + };
> +
> + dummy_clk: dummy12m {
> + compatible = "fixed-clock";
> + clock-frequency = <12000000>;
> + #clock-cells = <0>;
> + /* must need this line, or uart uanable to get dummy_clk */
> + u-boot,dm-pre-reloc;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + clock-frequency = <13000000>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> + arm,cpu-registers-not-fw-configured;
> + };
> +
> + timer0: timer at 10008000 {
> + compatible = "mediatek,mt7986-timer";
> + reg = <0x10008000 0x1000>;
> + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&infracfg CK_INFRA_CK_F26M>;
> + clock-names = "gpt-clk";
> + u-boot,dm-pre-reloc;
> + };
> +
> + watchdog: watchdog at 1001c000 {
> + compatible = "mediatek,mt7986-wdt";
> + reg = <0x1001c000 0x1000>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + #reset-cells = <1>;
> + status = "disabled";
> + };
> +
> + gic: interrupt-controller at c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0x0c000000 0x40000>, /* GICD */
> + <0x0c080000 0x200000>; /* GICR */
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + fixed_plls: apmixedsys at 1001E000 {
> + compatible = "mediatek,mt7986-fixed-plls";
> + reg = <0x1001E000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + topckgen: topckgen at 1001B000 {
> + compatible = "mediatek,mt7986-topckgen";
> + reg = <0x1001B000 0x1000>;
> + clock-parent = <&fixed_plls>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg_ao: infracfg_ao at 10001000 {
> + compatible = "mediatek,mt7986-infracfg_ao";
> + reg = <0x10001000 0x68>;
> + clock-parent = <&infracfg>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg: infracfg at 10001040 {
> + compatible = "mediatek,mt7986-infracfg";
> + reg = <0x10001000 0x1000>;
> + clock-parent = <&topckgen>;
> + #clock-cells = <1>;
> + };
> +
> + pinctrl: pinctrl at 1001f000 {
> + compatible = "mediatek,mt7986-pinctrl";
> + reg = <0x1001f000 0x1000>,
> + <0x11c30000 0x1000>,
> + <0x11c40000 0x1000>,
> + <0x11e20000 0x1000>,
> + <0x11e30000 0x1000>,
> + <0x11f00000 0x1000>,
> + <0x11f10000 0x1000>,
> + <0x1000b000 0x1000>;
> + reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
> + "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
> + "iocfg_tl_base", "eint";
> + gpio: gpio-controller {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + pwm: pwm at 10048000 {
> + compatible = "mediatek,mt7986-pwm";
> + reg = <0x10048000 0x1000>;
> + #clock-cells = <1>;
> + #pwm-cells = <2>;
> + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&infracfg CK_INFRA_PWM>,
> + <&infracfg_ao CK_INFRA_PWM_BSEL>,
> + <&infracfg_ao CK_INFRA_PWM1_CK>,
> + <&infracfg_ao CK_INFRA_PWM2_CK>;
> + assigned-clocks = <&topckgen CK_TOP_PWM_SEL>,
> + <&infracfg CK_INFRA_PWM_BSEL>,
> + <&infracfg CK_INFRA_PWM1_SEL>,
> + <&infracfg CK_INFRA_PWM2_SEL>;
> + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D4>,
> + <&infracfg CK_INFRA_PWM>,
> + <&infracfg CK_INFRA_PWM>,
> + <&infracfg CK_INFRA_PWM>;
> + clock-names = "top", "main", "pwm1", "pwm2";
> + status = "disabled";
> + u-boot,dm-pre-reloc;
> + };
> +
> + uart0: serial at 11002000 {
> + compatible = "mediatek,hsuart";
> + reg = <0x11002000 0x400>;
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&infracfg_ao CK_INFRA_UART0_CK>;
> + assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
> + <&infracfg_ao CK_INFRA_UART0_SEL>;
> + assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
> + <&infracfg CK_INFRA_UART>;
> + mediatek,force-highspeed;
> + status = "disabled";
> + u-boot,dm-pre-reloc;
> + };
> +
> + uart1: serial at 11003000 {
> + compatible = "mediatek,hsuart";
> + reg = <0x11003000 0x400>;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&infracfg_ao CK_INFRA_UART1_CK>;
> + assigned-clocks = <&infracfg CK_INFRA_UART1_SEL>;
> + assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
> + mediatek,force-highspeed;
> + status = "disabled";
> + };
> +
> + uart2: serial at 11004000 {
> + compatible = "mediatek,hsuart";
> + reg = <0x11004000 0x400>;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&infracfg_ao CK_INFRA_UART2_CK>;
> + assigned-clocks = <&infracfg CK_INFRA_UART2_SEL>;
> + assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
> + mediatek,force-highspeed;
> + status = "disabled";
> + };
> +
> + snand: snand at 11005000 {
> + compatible = "mediatek,mt7986-snand";
> + reg = <0x11005000 0x1000>,
> + <0x11006000 0x1000>;
> + reg-names = "nfi", "ecc";
> + clocks = <&infracfg_ao CK_INFRA_SPINFI1_CK>,
> + <&infracfg_ao CK_INFRA_NFI1_CK>,
> + <&infracfg_ao CK_INFRA_NFI_HCK_CK>;
> + clock-names = "pad_clk", "nfi_clk", "nfi_hclk";
> + assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>,
> + <&topckgen CK_TOP_NFI1X_SEL>;
> + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>,
> + <&topckgen CK_TOP_CB_M_D8>;
> + status = "disabled";
> + };
> +
> + ethsys: syscon at 15000000 {
> + compatible = "mediatek,mt7986-ethsys", "syscon";
> + reg = <0x15000000 0x1000>;
> + clock-parent = <&topckgen>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + eth: ethernet at 15100000 {
> + compatible = "mediatek,mt7986-eth", "syscon";
> + reg = <0x15100000 0x20000>;
> + resets = <ðsys ETHSYS_FE_RST>;
> + reset-names = "fe";
> + mediatek,ethsys = <ðsys>;
> + mediatek,sgmiisys = <&sgmiisys0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + sgmiisys0: syscon at 10060000 {
> + compatible = "mediatek,mt7986-sgmiisys", "syscon";
> + reg = <0x10060000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + sgmiisys1: syscon at 10070000 {
> + compatible = "mediatek,mt7986-sgmiisys", "syscon";
> + reg = <0x10070000 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + spi0: spi at 1100a000 {
> + compatible = "mediatek,ipm-spi";
> + reg = <0x1100a000 0x100>;
> + clocks = <&infracfg_ao CK_INFRA_SPI0_CK>,
> + <&topckgen CK_TOP_SPI_SEL>;
> + assigned-clocks = <&topckgen CK_TOP_SPI_SEL>,
> + <&infracfg CK_INFRA_SPI0_SEL>;
> + assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>,
> + <&topckgen CK_INFRA_ISPI0>;
> + clock-names = "sel-clk", "spi-clk";
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + spi1: spi at 1100b000 {
> + compatible = "mediatek,ipm-spi";
> + reg = <0x1100b000 0x100>;
> + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + mmc0: mmc at 11230000 {
> + compatible = "mediatek,mt7986-mmc";
> + reg = <0x11230000 0x1000>,
> + <0x11C20000 0x1000>;
> + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&topckgen CK_TOP_EMMC_416M>,
> + <&topckgen CK_TOP_EMMC_250M>,
> + <&infracfg_ao CK_INFRA_MSDC_CK>;
> + assigned-clocks = <&topckgen CK_TOP_EMMC_416M_SEL>,
> + <&topckgen CK_TOP_EMMC_250M_SEL>;
> + assigned-clock-parents = <&topckgen CK_TOP_CB_M_416M>,
> + <&topckgen CK_TOP_NET1_D5_D2>;
> + clock-names = "source", "hclk", "source_cg";
> + status = "disabled";
> + };
> +
> + xhci: xhci at 11200000 {
> + compatible = "mediatek,mt7986-xhci",
> + "mediatek,mtk-xhci";
> + reg = <0x11200000 0x2e00>,
> + <0x11203e00 0x0100>;
> + reg-names = "mac", "ippc";
> + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&u2port0 PHY_TYPE_USB2>,
> + <&u3port0 PHY_TYPE_USB3>,
> + <&u2port1 PHY_TYPE_USB2>;
> + clocks = <&dummy_clk>,
> + <&dummy_clk>,
> + <&dummy_clk>,
> + <&dummy_clk>,
> + <&dummy_clk>;
> + clock-names = "sys_ck",
> + "xhci_ck",
> + "ref_ck",
> + "mcu_ck",
> + "dma_ck";
> + tpl-support;
> + status = "okay";
> + };
> +
> + usbtphy: usb-phy at 11e10000 {
> + compatible = "mediatek,mt7986",
> + "mediatek,generic-tphy-v2";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + status = "okay";
> +
> + u2port0: usb-phy at 11e10000 {
> + reg = <0x11e10000 0x700>;
> + clocks = <&dummy_clk>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "okay";
> + };
> +
> + u3port0: usb-phy at 11e10700 {
> + reg = <0x11e10700 0x900>;
> + clocks = <&dummy_clk>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "okay";
> + };
> +
> + u2port1: usb-phy at 11e11000 {
> + reg = <0x11e11000 0x700>;
> + clocks = <&dummy_clk>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "okay";
> + };
> + };
> +};
> diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
> index f79a5c62cd..e059a013db 100644
> --- a/arch/arm/mach-mediatek/Kconfig
> +++ b/arch/arm/mach-mediatek/Kconfig
> @@ -40,6 +40,14 @@ config TARGET_MT7629
> including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet,
> switch, USB3.0, PCIe, UART, SPI, I2C and PWM.
>
> +config TARGET_MT7986
> + bool "MediaTek MT7986 SoC"
> + select ARM64
> + help
> + The MediaTek MT7986 is a ARM64-based SoC with a quad-core Cortex-A53.
> + including UART, SPI, SPI flash, USB3.0, MMC, NAND, SNFI, PWM, PCIe,
> + Gigabit Ethernet, I2C, built-in 4x4 Wi-Fi, and PCIe.
> +
> config TARGET_MT8183
> bool "MediaTek MT8183 SoC"
> select ARM64
> @@ -84,6 +92,7 @@ config SYS_BOARD
> default "mt7622" if TARGET_MT7622
> default "mt7623" if TARGET_MT7623
> default "mt7629" if TARGET_MT7629
> + default "mt7986" if TARGET_MT7986
> default "mt8183" if TARGET_MT8183
> default "mt8512" if TARGET_MT8512
> default "mt8516" if TARGET_MT8516
> @@ -99,6 +108,7 @@ config SYS_CONFIG_NAME
> default "mt7622" if TARGET_MT7622
> default "mt7623" if TARGET_MT7623
> default "mt7629" if TARGET_MT7629
> + default "mt7986" if TARGET_MT7986
> default "mt8183" if TARGET_MT8183
> default "mt8512" if TARGET_MT8512
> default "mt8516" if TARGET_MT8516
> @@ -113,6 +123,7 @@ config MTK_BROM_HEADER_INFO
> string
> default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 ||
> TARGET_MT7622
Same here.
> default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183
> + default "media=snand;nandinfo=2k+64" if TARGET_MT7986
> default "lk=1" if TARGET_MT7623
>
> endif
> diff --git a/arch/arm/mach-mediatek/Makefile
> b/arch/arm/mach-mediatek/Makefile
And here.
> index 0f5b0c16d2..fe5c3a837c 100644
> --- a/arch/arm/mach-mediatek/Makefile
> +++ b/arch/arm/mach-mediatek/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_MT8512) += mt8512/
> obj-$(CONFIG_TARGET_MT7622) += mt7622/
> obj-$(CONFIG_TARGET_MT7623) += mt7623/
> obj-$(CONFIG_TARGET_MT7629) += mt7629/
> +obj-$(CONFIG_TARGET_MT7986) += mt7986/
> obj-$(CONFIG_TARGET_MT8183) += mt8183/
> obj-$(CONFIG_TARGET_MT8516) += mt8516/
> obj-$(CONFIG_TARGET_MT8518) += mt8518/
> diff --git a/arch/arm/mach-mediatek/mt7986/Makefile
> b/arch/arm/mach-mediatek/mt7986/Makefile
And here.
> new file mode 100644
> index 0000000000..007eb4a367
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/mt7986/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-y += init.o
> +obj-y += lowlevel_init.o
> diff --git a/arch/arm/mach-mediatek/mt7986/init.c
> b/arch/arm/mach-mediatek/mt7986/init.c
And here again.
> new file mode 100644
> index 0000000000..4884cbdc67
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/mt7986/init.c
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2022 MediaTek Inc.
> + * Author: Sam Shih <sam.shih at mediatek.com>
> + */
> +
> +#include <fdtdec.h>
> +#include <asm/armv8/mmu.h>
> +#include <init.h>
> +#include <asm/system.h>
> +#include <asm/global_data.h>
> +#include <linux/sizes.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int print_cpuinfo(void)
> +{
> + printf("CPU: MediaTek MT7986\n");
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_2G);
> +
> + return 0;
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> + psci_system_reset();
> +}
> +
> +static struct mm_region mt7986_mem_map[] = {
> + {
> + /* DDR */
> + .virt = 0x40000000UL,
> + .phys = 0x40000000UL,
> + .size = 0x80000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
> + }, {
> + .virt = 0x00000000UL,
> + .phys = 0x00000000UL,
> + .size = 0x40000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> + PTE_BLOCK_NON_SHARE |
> + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> + }, {
> + 0,
> + }
> +};
> +
> +struct mm_region *mem_map = mt7986_mem_map;
> diff --git a/arch/arm/mach-mediatek/mt7986/lowlevel_init.S
> b/arch/arm/mach-mediatek/mt7986/lowlevel_init.S
And here.
> new file mode 100644
> index 0000000000..244d2c1385
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/mt7986/lowlevel_init.S
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2022 MediaTek Inc.
> + * Author: Sam Shih <sam.shih at mediatek.com>
> + */
> +
> +/*
> + * Switch from AArch64 EL2 to AArch32 EL2
> + * @param inputs:
> + * x0: argument, zero
> + * x1: machine nr
> + * x2: fdt address
> + * x3: input argument
> + * x4: kernel entry point
> + * @param outputs for secure firmware:
> + * x0: function id
> + * x1: kernel entry point
> + * x2: machine nr
> + * x3: fdt address
> +*/
> +
> +.global armv8_el2_to_aarch32
> +armv8_el2_to_aarch32:
> + mov x3, x2
> + mov x2, x1
> + mov x1, x4
> + mov x4, #0
> + ldr x0, =0x82000200
> + SMC #0
> + ret
> --
> 2.17.1
>
More information about the U-Boot
mailing list