Broken commit de47ff536363289f92f85ed1e4901724d238432d

[Tom Rini]

On Fri, Aug 05, 2022 at 04:59:35PM +0200, Pali Rohár wrote:
> On Friday 05 August 2022 10:47:31 Tom Rini wrote:
> > On Fri, Aug 05, 2022 at 04:21:24PM +0200, Pali Rohár wrote:
> > > On Wednesday 03 August 2022 12:13:18 Tom Rini wrote:
> > > > On Wed, Aug 03, 2022 at 06:00:13PM +0200, Pali Rohár wrote:
> > > > > On Tuesday 02 August 2022 06:58:26 Tom Rini wrote:
> > > > > > On Tue, Aug 02, 2022 at 11:13:38AM +0200, Pali Rohár wrote:
> > > > > > 
> > > > > > > Hello Tom!
> > > > > > > 
> > > > > > > Your commit de47ff536363289f92f85ed1e4901724d238432d ("Convert
> > > > > > > CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") seems to be broken.
> > > > > > 
> > > > > > I thought I had managed to mirror the TPL/SPL/full usage that was there
> > > > > > prior, but apparently some got missed.
> > > > > 
> > > > > Yea, conversion to Kconfig seems that was incorrect.
> > > > 
> > > > As the config files were just unclear, but you seem to understand what
> > > > it's supposed to be, a patch to clean it up would be most appreciated,
> > > > thanks.
> > > > 
> > > > -- 
> > > > Tom
> > > 
> > > Broken is also commit d433c74eecdce1e4952ef4e8c712a9289c0dfcc2. Seems
> > > that all kconfig migration changes done after that commit are broken.
> > > 
> > > I really do not have energy to investigate what and how was broken due
> > > to incorrect kconfig migration.
> > > 
> > > 
> > > I did simple test. Applied following change:
> > > 
> > > diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
> > > index a6523753d5ca..489f24df0ab1 100644
> > > --- a/include/configs/p1_p2_rdb_pc.h
> > > +++ b/include/configs/p1_p2_rdb_pc.h
> > > @@ -624,3 +624,7 @@ __stringify(__PCIE_RST_CMD)"\0"
> > >  "bootm $norbootaddr - $norfdtaddr"
> > >  
> > >  #endif /* __CONFIG_H */
> > > +
> > > +#ifdef CONFIG_SDCARD
> > > +#error
> > > +#endif
> > > 
> > > And then called:
> > > 
> > > make CROSS_COMPILE=powerpc-linux-gnuspe- P2020RDB-PC_defconfig u-boot.bin
> > > 
> > > And it failed, even when this defconfig file is not SD card builds.
> > 
> > Where is PBL in that case even then?
> 
> P2020 (and older) are pre-PBL boards, they do not support NXP PBL
> header.

Ah, OK, then it should just be removing TARGET_P2020RDB from the choice
on "Freescale PBL load location".

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220805/57ab3371/attachment.sig>