Broken commit de47ff536363289f92f85ed1e4901724d238432d

[Pali Rohár]

On Friday 05 August 2022 11:03:40 Tom Rini wrote:
> On Fri, Aug 05, 2022 at 04:59:35PM +0200, Pali Rohár wrote:
> > On Friday 05 August 2022 10:47:31 Tom Rini wrote:
> > > On Fri, Aug 05, 2022 at 04:21:24PM +0200, Pali Rohár wrote:
> > > > On Wednesday 03 August 2022 12:13:18 Tom Rini wrote:
> > > > > On Wed, Aug 03, 2022 at 06:00:13PM +0200, Pali Rohár wrote:
> > > > > > On Tuesday 02 August 2022 06:58:26 Tom Rini wrote:
> > > > > > > On Tue, Aug 02, 2022 at 11:13:38AM +0200, Pali Rohár wrote:
> > > > > > > 
> > > > > > > > Hello Tom!
> > > > > > > > 
> > > > > > > > Your commit de47ff536363289f92f85ed1e4901724d238432d ("Convert
> > > > > > > > CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") seems to be broken.
> > > > > > > 
> > > > > > > I thought I had managed to mirror the TPL/SPL/full usage that was there
> > > > > > > prior, but apparently some got missed.
> > > > > > 
> > > > > > Yea, conversion to Kconfig seems that was incorrect.
> > > > > 
> > > > > As the config files were just unclear, but you seem to understand what
> > > > > it's supposed to be, a patch to clean it up would be most appreciated,
> > > > > thanks.
> > > > > 
> > > > > -- 
> > > > > Tom
> > > > 
> > > > Broken is also commit d433c74eecdce1e4952ef4e8c712a9289c0dfcc2. Seems
> > > > that all kconfig migration changes done after that commit are broken.
> > > > 
> > > > I really do not have energy to investigate what and how was broken due
> > > > to incorrect kconfig migration.
> > > > 
> > > > 
> > > > I did simple test. Applied following change:
> > > > 
> > > > diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
> > > > index a6523753d5ca..489f24df0ab1 100644
> > > > --- a/include/configs/p1_p2_rdb_pc.h
> > > > +++ b/include/configs/p1_p2_rdb_pc.h
> > > > @@ -624,3 +624,7 @@ __stringify(__PCIE_RST_CMD)"\0"
> > > >  "bootm $norbootaddr - $norfdtaddr"
> > > >  
> > > >  #endif /* __CONFIG_H */
> > > > +
> > > > +#ifdef CONFIG_SDCARD
> > > > +#error
> > > > +#endif
> > > > 
> > > > And then called:
> > > > 
> > > > make CROSS_COMPILE=powerpc-linux-gnuspe- P2020RDB-PC_defconfig u-boot.bin
> > > > 
> > > > And it failed, even when this defconfig file is not SD card builds.
> > > 
> > > Where is PBL in that case even then?
> > 
> > P2020 (and older) are pre-PBL boards, they do not support NXP PBL
> > header.
> 
> Ah, OK, then it should just be removing TARGET_P2020RDB from the choice
> on "Freescale PBL load location".
> 
> -- 
> Tom

I just do not understand.

P10** and P20** do not support NXP PBL. They support only pre-PBL and
for SD card pre-PBL support I added option FSL_PREPBL_ESDHC_BOOT_SECTOR.

But CONFIG_SDCARD is automatically set when SYS_EXTRA_OPTIONS contains
"SDCARD" string and CONFIG_SDCARD is used then also in P10** and P20**
SD-card version of SPL to load proper U-Boot.